fbpx

236D3 Skid Steer Loader

The Cat® 236D3 Skid Steer Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power.

Net Power - ISO 9249 55.1 kW
Engine Model Cat 3.3B DIT (turbo)
Net Power - SAE 1349 54.6 kW
Bore 94 mm
Stroke 120 mm
Displacement 3.3 l
Gross Power - SAE J1995 55.4 kW
Net Flywheel Power 54.6 kW
Peak Torque - 1,500 rpm - SAE J1995 265 N·m

Operating Weight 2979 kg
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).

Rated Operating Capacity 820 kg
Tipping Load 1635 kg
Breakout Force - Tilt Cylinder 2269 kg
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Rated Operating Capacity with Optional Counterweight 910 kg

Vehicle Width over Tires 1676 mm
Departure Angle 26°
Maximum Dump Angle 48°
Height - Top of Cab 2082 mm
Wheel Base 1105 mm
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Bucket Pin Height - Carry Position 190 mm
Bucket Pin Height - Maximum Lift 3122 mm
Bumper Overhang - Behind Rear Axle 1021 mm
Clearance at Maximum Lift and Dump 2359 mm
Ground Clearance 195 mm
Length - With Bucket on Ground 3487 mm
Length - Without Bucket 2767 mm
Maximum Overall Height 3977 mm
Maximum Reach - With Arms Parallel to Ground 1353 mm
Rack Back Angle - Maximum Height 91°
Reach - Maximum Lift/Dump 408 mm
Turning Radius from Center - Bucket 2107 mm
Turning Radius from Center - Coupler 1314 mm
Turning Radius from Center - Machine Rear 1639 mm

Fuel Tank 94 l
Cooling System 14 l
Chain Box - Each Side 8.8 l
Engine Crankcase 11 l
Hydraulic System 50 l
Hydraulic Tank 39 l

ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

Hydraulic Flow - High Flow - Hydraulic Power (Calculated) 43 kW
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow 112 l/min
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure 23000 kPa
Hydraulic Flow - Standard - Hydraulic Power (Calculated) 29 kW
Hydraulic Flow - Standard - Loader Hydraulic Flow 76 l/min
Hydraulic Flow - Standard - Loader Hydraulic Pressure 23000 kPa

Inside Cab* 83 dB(A)
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2) *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (3) **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Outside Cab** 101 dB(A)

Travel Speed - Forward or Reverse - One Speed 11.2 km/h
Travel Speed - Forward or Reverse - Two Speed Option 17.1 km/h

Ask Quotation

Usados

SOLUTIONS THAT SIMPLIFY

(Free) 800 206 707

STET
Websites