fbpx

226D3 Skid Steer Loader

The Cat® 226D3 Skid Steer Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power.

Net Power - ISO 9249 49.6 kW
Engine Model Cat C2.2 CRDI
Net Power - SAE 1349 49.1 kW
Bore 84 mm
Stroke 100 mm
Displacement 2.2 l
Gross Power - SAE J1995 50.1 kW
Peak Torque - 1,500 rpm - SAE J1995 208 N·m

Operating Weight 2653 kg
Note * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).

Rated Operating Capacity 705 kg
Tipping Load 1410 kg
Breakout Force - Tilt Cylinder 1781 kg
Note * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Rated Operating Capacity with Optional Counterweight 750 kg

Vehicle Width over Tires 1497 mm
Departure Angle 27.9°
Maximum Dump Angle 46.7°
Height - Top of Cab 2028 mm
Wheel Base 1054 mm
Note * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Bucket Pin Height - Carry Position 215 mm
Bucket Pin Height - Maximum Lift 2818 mm
Bumper Overhang - Behind Rear Axle 8944 mm
Clearance at Maximum Lift and Dump 2077 mm
Ground Clearance 175 mm
Length - With Bucket on Ground 3234 mm
Length - Without Bucket 2524 mm
Maximum Overall Height 3652 mm
Maximum Reach - With Arms Parallel to Ground 1288 mm
Rack Back Angle - Maximum Height 88.9°
Reach - Maximum Lift/Dump 533 mm
Turning Radius from Center - Bucket 1977 mm
Turning Radius from Center - Coupler 1104 mm
Turning Radius from Center - Machine Rear 1513 mm

Fuel Tank 57 l
Cooling System 12 l
Chain Box - Each Side 7 l
Engine Crankcase 10 l
Hydraulic System 45 l
Hydraulic Tank 34 l

ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

Hydraulic Flow - High Flow - Hydraulic Power (Calculated) 38 kW
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow 99 l/min
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure 23000 kPa
Hydraulic Flow - Standard - Hydraulic Power (Calculated) 26.5 kW
Hydraulic Flow - Standard - Loader Hydraulic Flow 69 l/min
Hydraulic Flow - Standard - Loader Hydraulic Pressure 23000 kPa

Inside Cab** 83 dB(A)
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2) **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (3) ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Outside Cab*** 102 dB(A)

Travel Speed - Forward or Reverse - One Speed 12.3 km/h
Travel Speed - Forward or Reverse - Two Speed Option 17.8 km/h

Ask Quotation

Usados

SOLUTIONS THAT SIMPLIFY

(Free) 800 206 707

STET
Websites