fbpx

Motoniveladora 140 GC / 140 GC AWD

The Cat® 140 GC motor grader is easy to own and operate. It’s easy on your wallet too. A demand fan and standard ECO mode reduces fuel consumption while open access to maintenance points makes service quick and simple. Control the blade with consistent movement using lever controls from the comfort of the all new cab. Not all features available in all regions. Consult your Cat dealer for specific configurations available in your region.

Engine Power (ISO 14396) 147 kW
Engine Model Cat 7.1
Engine RPM 2,200
Maximum Torque - ISO 9249 835 N·m
Torque Rise - ISO 9294 40%
Bore 105 mm
Stroke 135 mm
Displacement 7.01 l
Emissions U.S. EPA Tier 4 Final/EU Stage V
Engine Power AWD (ISO 14396) 147 kW
Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture.
Note (2) Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Number of Cylinders 6
Standard Capability 43 °C
Derating Altitude 3000 m
High - Ambient Capability 50 °C
Note (3) Power as declared per ISO 14396

Weight (Stage V)* 17650 kg
All-Wheel Drive Weight (AWD) (Stage V)* 18390 kg
All-wheel Drive Weight (AWD) (Tier 4 Final)** 19105 kg
Weight (Tier 4 Final)** 18365 kg

Blade Width 3.7 m
End Bit 152 mm
Arc Radius 413 mm
Throat Clearance 112 mm
Blade Height 610 mm
Cutting Edge Width 152 mm

Note * Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment.

Note The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes.

Maximum Height 3363 mm
Width All Wheel Drive (AWD) 2523 mm
Length of Machine* 10322 mm
Width 2428 mm
Note *Typically equipped with push block and ripper.

Circle Center Shift Left 752 mm
Circle Center Shift Right 728 mm
Maximum Shoulder Reach Left 1886 mm
Maximum Shoulder Reach Right 1812 mm
Moldboard Side Shift Left 649 mm
Moldboard Side Shift Right 526 mm
Blade Tip Range Backward 5
Blade Tip Range Forward 40
Maximum Depth of Cut 715 mm
Maximum Lift Above Ground 475 mm

Circle Drive with Slip Clutch 7.5 l
Circle Drive without Slip Clutch 2 l
Fuel Tank 295 l
Cooling System 10.6 gal (US)
Transmission 18 l
Diesel Exhaust Fluid Tank (Tier 4 Only) 16 l
Engine Crankcase 21 l
Hydraulic System 45 l

Pedir cotação

Usados

SOLUÇÕES QUE SIMPLIFICAM

(Grátis) 800 206 707

Sites
STET