Equipamentos > Máquinas > CAMIÕES RÍGIDOS > Camiões Rígidos

777E - CAMIÕES RÍGIDOS

Ver Disponibilidade

Informação Técnica

Gross Power - SAE J1995

758 kW

Nominal Payload Class (100%)

92.6 ton (US)

Top Speed - Loaded

65.9 km/h

Unidade

Engine

Engine Model

Cat C32

Bore

145 mm

5.7 in

Stroke

162 mm

6.4 in

Displacement

32.1 l

1959 in³

Cylinders

Engine Power - ISO 14396

749 kW

1004 HP

Engine Speed

1750 r/min

Gross Power - SAE J1995

758 kW

1016 HP

Net Power - SAE J1349

708 kW

949 HP

Net Torque - 1,300 rpm

4757 N·m

3509 lb/ft

Net Torque Rise

23%

Note (1)

Power rating applies at 1,750 rpm when tested under the specified condition for the specified standard.

Note (2)

Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).

Emissions (1)

Meets U.S. EPA Tier 2 Equivalent emission standards.

Emissions (2)

Certified for China Nonroad Stage III emission standards.

Note (3)

No engine derating required up to 3048 m (10,000 ft) altitude.

Operating Specifications

Nominal Payload Class (100%)

92.6 ton (US)

102 ton (US)

Top Speed - Loaded

65.9 km/h

40.9 mile/h

Maximum Payload Class (110%)

98.2 ton (US)

108.2 ton (US)

Transmission

Forward - 1

10.7 km/h

6.6 mile/h

Forward - 3

19.8 km/h

12.2 mile/h

Forward - 5

36.2 km/h

22.5 mile/h

Forward - 7

65.9 km/h

40.9 mile/h

Note

Maximum travel speeds with standard 27.00R49 (E4) tires.

Reverse - 1

12.1 km/h

7.5 mile/h

Final Drives

Differential Ratio

2.74:1

Planetary Ratio

7.00:1

Total Reduction Ratio

19.16:1

Brakes

Brake Standards

ISO 3450:2011

Brake Surface Area - Front Caliper

2787 cm²

432 in²

Brake Surface Area - Front OCDB

40846 cm²

6331 in²

Brake Surface Area - Rear

102116 cm²

15828 in²

Body Hoists

Body Raise Time - High Idle

15 s

Pump Flow - High Idle

491 l/min

130 gal/min

Capacity - Dual Slope - 100% Fill Factor

Heaped 2:1 (SAE)

60.1 m³

78.6 yd³

Struck

42.1 m³

55 yd³

Weight Distributions - Approximate

Front Axle - Empty/Loaded

44%/30%

Rear Axle - Empty/Loaded

56%/70%

Suspension

Effective Cylinder Stroke - Front

318 mm

12.5 in

Effective Cylinder Stroke - Rear

165 mm

6.5 in

Rear axle - Oscillation

5.4°

Service Refill Capacities

Fuel Tank

1140 l

300 gal (US)

Cooling System

212 l

56 gal (US)

Crankcase

113.5 l

29.9 gal (US)

Differentials

222 l

58.6 gal (US)

Final Drive - Each

42 l

11 gal (US)

Steering System - Includes Tank

59 l

15.6 gal (US)

Torque Converter - Brake - Hoist Hydraulic Tank

385 l

101.7 gal (US)

Transmission System

122 l

32.2 gal (US)

Tires

Standard Tire

27.00R49 (E4)

Note (1)

Productive capabilities of the 777E truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production.

Note (2)

Caterpillar recommends the customer evaluate all job conditions and consult the tire manufacturer for proper tire selection.

ROPS

ROPS (Rollover Protective Structure) cab offered by Caterpillar meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.

FOPS

FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 for Operator and ISO 13459:2012 Level II FOPS criteria for Trainer.

Sound

Sound Standards

ISO 6393:2008, SAE J1166:2008

Note (1)

The operator sound exposure Leq (equivalent sound pressure level) measured according to work cycle procedures specified in SAE J1166:2008 is 80 dB(A) for cab offered by Caterpillar, when properly installed and maintained and tested with doors and windows closed.

Note (2)

The dynamic operator sound pressure level is 80 dB(A) as per ISO 6396:2008 for cab offered by Caterpillar. When properly installed and maintained and tested with doors and windows closed.

Steering

Steer Angle

30.5°

Steering Standards

ISO 5010:2007

Turning Diameter - Front

25.3 m

83 ft

Turning Circle - Clearance Diameter

28.4 m

93.17 ft

Note

Separate hydraulic system prevents cross-contamination.

Capacity - X Body - 100% Fill Factor

Heaped 2:1 (SAE)

64.1 m³

83.8 yd³

Struck

43.1 m³

56.3 yd³

Dimensions (Approximate) - Dual Slope

Centerline Front Tire Width

4163 mm

13.66 ft

Centerline of Rear Dual Tire Width

3576 mm

11.73 ft

Dump Clearance

890 mm

2.91 ft

Engine Guard Clearance

864 mm

2.83 ft

Front Canopy Height - Loaded

5177 mm

17 ft

Ground Clearance

896 mm

2.93 ft

Height - Top of ROPS - Loaded

4730 mm

15.51 ft

Inside Body Depth - Maximum

1895 mm

6.21 ft

Inside Body Length

6920 mm

21.54 ft

Inside Body Width

5200 mm

17.06 ft

Loading Height - Empty

4380 mm

14.37 ft

Operating Width

6105 mm

20 ft

Operating Width - Extended Catwalk

6545 mm

21.47 ft

Outside Body Width

5524 mm

18.12 ft

Overall Body Length

9555 mm

31.35 ft

Overall Canopy Width

6200 mm

19.87 ft

Overall Front Tire Width

4961 mm

16.28 ft

Overall Height - Body Raised

9953 mm

33 ft

Overall Length

10004 mm

32.82 ft

Overall Tire Width

5262 mm

17.26 ft

Rear Axle - Clearance

902 mm

2.95 ft

Rear Axle - Tail

3045 mm

10 ft

Wheel Base

4570 mm

15 ft

Dimensions (Approximate) - X Body

Centerline Front Tire Width

4163 mm

13.66 ft

Centerline of Rear Dual Tire Width

3576 mm

11.73 ft

Dump Clearance

818 mm

2.68 ft

Engine Guard Clearance

864 mm

2.83 ft

Front Canopy Height - Loaded

5370 mm

17.62 ft

Ground Clearance

896 mm

2.93 ft

Height - Top of ROPS - Loaded

4730 mm

15.51 ft

Inside Body Depth - Maximum

1777 mm

5.83 ft

Inside Body Length

7186 mm

23.81 ft

Inside Body Width

5450 mm

17.88 ft

Loading Height - Empty

4430 mm

14.53 ft

Operating Width

6105 mm

20 ft

Operating Width - Extended Catwalk

6545 mm

21.47 ft

Outside Body Width

5689 mm

18.66 ft

Overall Body Length

10070 mm

33 ft

Overall Canopy Width

6200 mm

20.34 ft

Overall Front Tire Width

4961 mm

16.28 ft

Overall Height - Body Raised

10071 mm

34.12 ft

Overall Length

10230 mm

33.56 ft

Overall Tire Width

5262 mm

17.26 ft

Rear Axle - Clearance

902 mm

2.95 ft

Rear Axle - Tail

3263 mm

10.7 ft

Wheel Base

4570 mm

15 ft

Weights - Dual Slope - With Liner

Body System Weight

16070 kg

35428 lb

Empty Operating Weight

70753 kg

155983 lb

Target Gross Machine Weight

163360 kg

360147 lb

Target Payload

92607 kg

204164 lb

Weights - Dual Slope - Without Liner

Body System Weight

16070 kg

35428 lb

Empty Operating Weight

65158 kg

143648 lb

Target Gross Machine Weight

163360 kg

360147 lb

Target Payload

98202 kg

216499 lb

Weights - X Body - With Liner

Body System Weight

15900 kg

35053 lb

Empty Operating Weight

69674 kg

153604 lb

Target Gross Machine Weight

163360 kg

360147 lb

Target Payload

93686 kg

206543 lb

Weights - X Body - Without Liner

Body System Weight

15900 kg

35053 lb

Empty Operating Weight

64988 kg

143274 lb

Target Gross Machine Weight

163360 kg

360147 lb

Target Payload

98372 kg

216873 lb

Ver menos

Se viu este produto, poderá interessar-lhe

775G (Tier 2) - CAMIÕES RÍGIDOS

Gross Power - SAE J1995
615 kW

Nominal Payload Class (100%)
64.6 t

Top Speed - Loaded
67.6 km/h
770G - CAMIÕES RÍGIDOS

Gross Power - SAE J1995
384 kW

Nominal Payload Class (100%)
38.2 t

Top Speed - Loaded
73.7 km/h
772G - CAMIÕES RÍGIDOS

Gross Power - SAE J1995
451 kW

Nominal Payload Class (100%)
46.8 t

Top Speed - Loaded
79.2 km/h
773G (Tier 2) - CAMIÕES RÍGIDOS

Gross Power - SAE J1995
615 kW

Nominal Payload Class (100%)
56 t

Top Speed - Loaded
67.6 km/h
777E - CAMIÕES RÍGIDOS

Gross Power - SAE J1995
758 kW

Nominal Payload Class (100%)
92.6 ton (US)

Top Speed - Loaded
65.9 km/h
777G (Tier 4 Equivalent) - CAMIÕES RÍGIDOS

Gross Power - SAE J1995
765 kW

Nominal Payload Class (100%)
90.8 t

Top Speed - Loaded
67.1 km/h

777E - CAMIÕES RÍGIDOS

Informação Técnica

Se viu este produto, poderá interessar-lhe

Podemos ajudá-lo?