Net Power (Rated) - SAE J1349/ISO 9249
Net Power - Rated - ISO 9249 (DIN)
All nonroad Tier 4 Interim and Final, Stage IIIB and IV and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 Final or China Nonroad Stage III, India Bharat III, Eurasian Economic Union Stage IIIA, UN ECE R96 Stage IIIA emission standards, equivalent to Tier 3/Stage IIIA
Track on Ground
Ground Contact Area - Optional Shoe
Ground Contact Area - Standard Shoe
Ground Pressure(1) - Optional Shoe
Ground Pressure(1) - Standard Shoe
Grouser Height - Double Grouser
Track Rollers/Shoes - Each Side
Track Shoe Width - Optional
Track Shoe Width - Standard
Ground Pressure - Optional Shoe
Ground Pressure - Standard Shoe
(1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.
Bucket Height - Carry Position
Carry Position Approach Angle
Clearance at Full Lift Height and 45° Dump*
Height - Bucket Hinge Pin
Height - Top of Stack
Machine Height - Top of Cab
Maximum Rollback - Ground/Carry Position
Maximum Rollback/Dump - Fully Raised
*With general purpose bucket and extra duty teeth.
Overall Machine Height - Bucket Fully Raised
Overall Machine Length*
Overall Machine Width without Bucket: Narrow Tracks - 380 mm (14.9 in) Shoes
Overall Machine Width without Bucket: Standard Tracks - 480 mm (19.7 in) Shoes
Reach at Full Lift Height and 45° Dump*