We use cookies on our site to improve performance and experience. By continuing, you agree to accept all cookies.
Read privacy policy.
Contact us TODAY
(+351) 219 409 300
PT |EN

Rental

Service Appointment

Buy Parts

Used Equipment

Customer Portal

Need help?

Select the area
parts.cat.com
parts.cat.com

vision link
vision link

my.cat.com
my.cat.com

S.O.S. Web Service
S.O.S. Web Service
General informations
Specifications
Alternative Products
> > >

Check availability

Specifications

-

-



Units
See less

If you have seen this product, it may interest you

  • CG132B-8 - Electric Power
    Fuel Type
     Natural Gas, Biogas, Coal Gas
    Frequency
     50 / 60 Hz
  • CTE Series Automatic Transfer Switch - Electric Power
    Rating Range
     40-4000A
    Transfer Type
     Open / Closed / 4 position switch
    Switch Type
     Contactor Based
  • 335F L - Excavators
    Engine Power - ISO 9249
     200 HP
    Operating Weight
     83820 lb
  • G3408 - Industrial
    Maximum Power
     425 HP

    -
    Weight - Net Dry
     2245 kg (4950 lb)
  • C32 ACERT Tier 3 - Marine Power Systems
    Power Range
     750-1800 bhp (559-1342 bkW)
    Speed Range
     1600-2300 rpm
    Emissions
     EPA Tier 3, IMO II, EU IW
  • G345 Demolition & Sorting Grapple: 587-8995 - Grapples
    Capacity
     1.31 yd³
    Weight
     6080 lb
  • 5.7m³ (7.5yd³) - Buckets - Loader
    Capacity
     7.5 yd³
    Width
     116 in
    Weight
     4140 lb
  • 3.5 m3 (4.6 yd3), Fusion™, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     4.6 yd³
    Width
     107.4 in
    Weight
     3961.7 lb
  • 3412C (50 Hz) - Electric Power
    Minimum Rating
     680 kVA
    Maximum Rating
     900 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption
  • C11 - Industrial
    Maximum Power
     450 HP
    Rated Speed
     1800-2100 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     930 kg (2050 lb)
  • M317F - Excavators

     -
    Operating Weight*
     17 550 to 18 550 kg (38,691 to 40,896 lb)
  • CP74B - Compactors
    Gross Power
     173.7 HP
    Operating Weight - With Cab
     36048 lb
    Compaction Width
     84 in
  • A23 - Augers
    Drive Shaft Torque at Maximum Pressure
     1699.3 lb/ft
    Drive Method
     Gerotor Motor - Direct Drive
    Mounting Bracket Design
     Skid Steer Loader, Compact Wheel Loader
  • 3.05 m (10 ft) - Snow Pushes
    Weight
     4111.6 lb
    Overall Height
     38.4 in
    Working Width
     120 in
  • 302.4D - Excavators
    Gross Power - ISO 14396
     24.3 HP
    Operating Weight
     5115 lb
  • 4.6m³ (6yd³) Performance Series - Buckets - Loader
    Capacity
     6 yd³
    Width
     126 in
    Weight
     5077 lb
  • R1700 - Underground - Hard Rock
    Gross Power - ISO 14396
     361 HP
    Loaded
     128258 lb
    Nominal Payload Capacity
     33069 lb
  • 13m³ (17yd³) - Buckets - Loader
    Capacity
     17 yd³
    Width
     203 in
    Weight
     38320 lb
  • 1.4 m3 (1.8 yd3), ISO Coupler, Bolt-On Teeth - Buckets - Compact Wheel Loader
    Rated Capacity
     2.1 yd³
    Width
     95.6 in
    Weight
     1213 lb
  • CS74B - Compactors
    Gross Power
     173.7 HP
    Operating Weight - With Cab
     35264 lb
    Compaction Width
     84 in
  • 3.2m³ (4.25yd³) - Buckets - Loader
    Capacity
     4.25 yd³
    Width
     109 in
    Weight
     2730 lb
  • 34m³ (44.5yd³) Standard Rock - Buckets - Mining Shovels

     -

    -
  • 65.75 m³ (86.0 yd³) - Blades
    Capacity
     86 yd³
    Width
     290 in
  • 2m³ (2.6yd³) - Buckets - Loader
    Capacity
     2.6 yd³
    Width
     100 in
    Weight
     2119 lb
  • 1220 mm (48 in) - Fork Accessories

     -

    -
  • 1676 mm (66 in) - Forks
    Width
     66 in
    Height - Grapples Closed
     30.3 in
    Jaw Opening
     34.5 in
  • P235 - Pulverizers
    Capacity - Concrete Thickness
     35.4 in
    Width
     27.8 in
    Weight
     7542 lb
  • 35.9m³ (47yd³) Serrated Edge - Buckets - Loader
    Capacity
     47 yd³
    Width
     248 in
    Weight
     51916 lb
  • 785D - Off-Highway Trucks
    Gross Power - SAE J1995
     1450 HP

    -
    Top Speed - Loaded
     34 mile/h
  • 2.7 m3 (3.5 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     3.5 yd³
    Width
     108.1 in
    Weight
     2667.6 lb
  • 637K - Wheel Tractor-Scrapers
    Flywheel Power - Tractor/Scraper
     570 HP
    Scraper Capacity - Heaped
     34 yd³
    Top Speed - Loaded
     34.7 mile/h
  • M316F (2017) - Excavators

     -
    Operating Weight*
     15 910 to 17 850 kg (35,076 to 39,352 lb)
  • G3512 1000 ekW - Electric Power
    Fuel Type
     Natural Gas
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Non-Emergency Stationary Genset
  • C32 Tier 4 / IMO III - Marine Power Systems
    Maximum Rating
     940 ekW
    Minimum Rating
     282 ekW
    Frequency
     60hz
  • 1676 mm (66 in) - Forks
    Width
     66 in
    Height - Grapples Closed
     31.9 in
    Weight
     1106.7 lb
  • 1.2 m3 (1.6 yd3), IT Coupler, Bolt-On Teeth - Buckets - Compact Wheel Loader
    Rated Capacity
     1.9 yd³
    Width
     95.6 in
    Weight
     1129 lb
  • G314 Demolition & Sorting Grapple: 587-8963 - Grapples
    Capacity
     0.52 yd³
    Weight - Including Bracket
     2303.83 lb
  • 1.03 m3 (1.35 yd3) Pin On, Bolt-On Cutting Edge - Buckets - Backhoe Front
    Capacity
     1.29 yd³
    Width
     89.1 in
    Weight
     1973.1 lb
  • 1730 mm (68 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.48 yd³
    Width
     68.1 in
    Weight
     511.5 lb
  • 3.1m³ (4yd³) - Buckets - Loader
    Capacity
     4 yd³
    Width
     117 in
    Weight
     3500 lb
  • C280-16 - Marine Power Systems
    Maximum Rating
     4840 ekW (6050 kVA)
    Minimum Rating
     4700 ekW (5875 kVA)
    Frequency
     50 Hz or 60 Hz
  • C280-12 Tier 4 - Marine Power Systems
    Power Range
     4962-5444 bhp (3700-4060 bkW)
    Speed Range
     1000 rpm
    Emissions
     EPA Tier 4, IMO II
  • PM312 Wheel Undercarriage - Cold Planers
    Rated Power
     336.6 HP
    Operating Weight
     46886 lb
    Milling Width
     48.2 in
  • 305 mm (12 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     4.6 ft³
    Width
     12 in
    Weight
     295.4 lb
  • 352F L XE - Excavators

     -
    Operating Weight
     113229 lb
  • MX150 Microprocessor Controller - Electric Power
    Rating Range
     Switch Dependent
    Transfer Type
     Application Dependent
    Switch Type
     Application Dependent
  • 406 mm (16 in) - Buckets - Excavator
    Rated Capacity
     3.7 yd³
    Width
     16 in
    Weight
     205 lb
  • CW-40S - Couplers - Excavator
    Weight
     473 lb
    Width
     16.8 in
    Load Rating, Hoisting Hook
     11 ton (US)
  • BR115 - Brushcutters
    Overall Width
     62 in
    Cutting Width
     60 in
    Maximum Cutting Diameter
     3 in
  • 301.7 CR - Excavators
    Gross Power - ISO 14396
     21.6 HP
    Operating Weight
     4222 lb
  • 315 GC - Excavators

     -
    Operating Weight
     34000 lb
  • 460 mm (18 in) - Buckets - Excavator
    Capacity
     1.4 ft³
    Width
     18.1 in
    Weight
     83.6 lb
  • G3412 - Electric Power
    Fuel Type
     Natural Gas
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Emergency Only Stationary Genset
  • C13 - Industrial
    Maximum Power
     520 HP
    Rated Speed
     1800-2100 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     2520 lb
  • 1.1 m3 (1.4 yd3), Pin On - Buckets - Backhoe Front
    Capacity
     1.4 yd³
    Width
     89.1 in
    Weight
     1011.9 lb
  • 22m³ (28.8yd³) Standard Rock - Buckets - Mining Shovels

     -

    -
  • GSH425 4-Tine, 750-Liter Orange Peel Grapple - Grapples
    Capacity
     1 yd³
    Operating Weight
     3461 lb
  • 457 mm (18 in), Pin On - Buckets - Backhoe Rear
    Capacity
     3.4 ft³
    Width
     18 in
    Weight
     324.1 lb
  • 966M - Wheel Loaders
    Maximum Net Power - 1,700 rpm - SAE J1349
     276 HP
    Operating Weight
     51176 lb
    Bucket Capacities
     3.20-7.40 m³ (4.19-9.68 yd³)
  • T315 Hydraulic Side Shift - Trenchers
    Overall Length
     118.5 in
    Overall Height
     30.9 in
    Overall Width
     74.8 in
  • 1200 mm (47 in) - Forks
    Fork Tine Width
     4 in
    Fork Tine Thickness
     2.36 in
    Fork Tine Length
     42 in
  • 0.8 m3 (1.0 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     1 yd³
    Width
     74.4 in
    Weight
     1297.4 lb
  • CW-55 - Couplers - Excavator
    Weight
     1540 lb
    Width
     33.2 in
    Load Rating, Hoisting Hook
     22 ton (US)
  • 1.03 m3 (1.35 yd3) Pin On, Bolt-On Teeth - Buckets - Backhoe Front
    Capacity
     1.29 yd³
    Width
     89.1 in
    Weight
     1642 lb
  • 3508B - Industrial
    Maximum Power
     1100 HP
    Rated Speed
     1800 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     4309 kg (9500 lb)
  • 11m³ (14.4yd³) Heavy Rock - Buckets - Mining Shovels

     -

    -
  • 3.66 m (12 ft) - Snow Pushes
    Weight
     1995.2 lb
    Overall Height
     38.4 in
    Working Width
     144 in
  • CW-30S - Couplers - Excavator
    Weight
     55 lb
    Width
     7 in
    Load Rating, Hoisting Hook
     11 ton (US)
  • 1.4 m3 (1.8 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
     2 yd³
    Width
     94.5 in
    Weight
     1276 lb
  • 259D - Compact Track and Multi Terrain Loaders
    Gross Power
     74.3 HP
    Operating Weight
     8945 lb
  • 3516B (50 Hz) - Electric Power
    Minimum Rating
     2000 kVA
    Maximum Rating
     2500 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption, Low Emissions
  • 318F L - Excavators
    Gross Power - SAE J1995
     91 kW (122 hp/124 PS)
    Operating Weight
     42340 lb
  • R1700G - Underground - Hard Rock
    Gross Power - SAE J1995
     353 HP
    Loaded
     112436 lb
    Nominal Payload Capacity - Tramming
     30865 lb
  • 8.6m³ (11.25yd³) Performance Series - Buckets - Loader
    Capacity - Adapters
     11.25 yd³
    Width
     184 in
    Weight
     19798 lb
  • C18 - Industrial
    Maximum Power
     800 HP
    Rated Speed
     1800-2000
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     3785 lb
  • 406 mm (16 in) - Buckets - Excavator
    Rated Capacity
     2.5 yd³
    Width
     16 in
    Weight
     163.1 lb
  • TH408D Ag Handler - Telehandlers
    Maximum Lift Height
     24.93 ft
    Operating Weight - With Carriage and Forks*
     18797 lb
    Rated Load Capacity
     8818 lb
  • T112 Manual Side Shift - Trenchers
    Overall Length
     106.5 in
    Overall Height
     30.9 in
    Overall Width
     74.8 in
  • 299D3 - Skid Steer Loaders
    Gross Power - SAE J1995
     98 HP
    Operating Weight
     11464 lb
  • 340F OEM - Excavators

     -

    -
  • 824K - Dozers
    Net Power - ISO 9249
     405 HP
    Maximum Operating Weight - Multiple Blade: Straight Blade (Tier 4 Final/Stage IV equivalent)
     74966 lb
  • 1883 mm (74 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.9 yd³
    Width
     74.1 in
    Weight
     665.8 lb
  • 762 mm (30 in), Pin On - Buckets - Backhoe Rear
    Capacity
     8.2 ft³
    Width
     30 in
    Weight
     368.2 lb
  • BRX318 Industrial - Brushcutters
    Overall Width
     75.2 in
    Cutting Width
     72 in
    Maximum Cutting Diameter
     8 in
  • 610 mm (24 in), Pin On - Buckets - Backhoe Rear
    Capacity
     6.2 ft³
    Width
     24 in
    Weight
     291 lb
  • 3.0 m3 (3.9 yd3), Fusion™, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     3.9 yd³
    Width
     99.5 in
    Weight
     3763.3 lb
  • AP555F - Asphalt Pavers
    Gross Power
     142 HP
    Operating Weight - Paver Only
     30430 lb
    Standard Paving Range - SE50 V, SE50 VT
     2.55 - 5.0 m (8' 4" - 16' 4")
  • 3516 - Industrial
    Maximum Power
     2000 HP
    Rated Speed
     1200-1800 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     7484 kg (16,499 lb)
  • 3516B (50 Hz) with Upgradeable Package - Electric Power
    Minimum Rating
     2000 kVA
    Maximum Rating
     2500 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption, Low Emissions
  • QS332

     -

    -
  • 17m³ (22.2yd³) Standard Rock - Buckets - Mining Shovels

     -

    -
  • TH314D - Telehandlers
    Maximum Lift Height
     45.4 ft
    Operating Weight - With Carriage and Forks
     22256 lb
    Rated Load Capacity
     7937 lb
  • 3.05 m (10 ft) - Snow Pushes
    Weight
     1995.2 lb
    Overall Height
     38.4 in
    Working Width
     120 in
  • 2185 mm (86 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     1.4 yd³
    Width
     86 in
    Weight
     804.7 lb
  • 1525 mm (60 in) - Forks
    Fork Tine Width
     4 in
    Fork Tine Thickness
     2 in
    Fork Tine Length
     60 in
  • CB1.7 - Compactors
    Gross Power
     24.7 HP
    Operating Weight
     3538 lb
    Standard Compaction Width
     35 in
  • 789 (Tier 4 Final / Stage V) - Off-Highway Trucks
    Gross Power - SAE J1995
     2100 HP

    -
    Top Speed - Loaded
     35.5 mile/h
  • 0.9 m3 (1.2 yd3), Bolt-On Teeth - Buckets - Compact Wheel Loader
    Capacity
     1.2 yd³
    Width
     74 in
    Weight
     843.7 lb
  • Pin Grabber Coupler - Narrow Profile (DB-Linkage): 388-9724 - Couplers - Excavator
    Weight
     1376 lb
    Width - Machine Interface
     23.2 in
    Lifting Eye Working Load Limit
     30865 ton (US)
  • 19m³ (25yd³) - Buckets - Loader
    Capacity
     25 yd³
    Width
     243 in
    Weight
     27509 lb
  • 762 mm (30 in), Pin On - Buckets - Backhoe Rear
    Capacity
     8.2 ft³
    Width
     30 in
    Weight
     324.1 lb
  • PREMIUM HIGH OUTPUT BATTERIES

     -

    -
  • 2.5m³ (3.25yd³) - Buckets - Loader
    Capacity
     2.8 yd³
    Width
     106 in
    Weight
     3582 lb
  • 415-440 Backhoe Loaders 1/4 Yard - Couplers - Backhoe Rear
    Weight
     191.8 lb

    -
  • 2.5m³ (3.25yd³) - Buckets - Loader
    Capacity
     3.25 yd³
    Width
     100 in
    Weight
     2211 lb
  • 11.5m³ (15yd³) - Buckets - Loader
    Capacity
     15 yd³
    Width
     162 in
    Weight
     13278 lb
  • G3306 - Industrial
    Maximum Power
     211 HP

    -
    Weight - Net Dry
     948 kg (2090 lb)
  • 4585mm (180in) Mat'l handing Arm, Fusion™ - Material Handling
    Maximum Load Rating
     19000 lb
    Retracted Length
     120 in
    Extended Length
     187 in
  • C9.3 Auxiliary Engine - Marine Power Systems
    Maximum Rating
     436 BHP
    Minimum Rating
     292 BHP
    Aspiration
     TA
  • 1.3 m3 (1.7 yd3), Pin On, Bolt-On Teeth - Buckets - Compact Wheel Loader
    Rated Capacity
     2 yd³
    Width
     95.6 in
    Weight
     1184.1 lb
  • 3.66 m (12 ft) - Snow Pushes
    Weight
     410.1 lb
    Overall Height
     16 in
    Working Width
     144 in
  • H140GC S - Hammers
    Impact Energy Class
     5531 ft-lb
    Blows per Minute
     250-550
    Maximum Operating Weight
     6894.8 lb
  • 303E CR - Excavators
    Gross Power
     24.8 HP
    Operating Weight with Cab - Long Stick
     7296 lb
  • 1.0 m3 (1.3 yd3), Pin On, Bolt-On Teeth - Buckets - Backhoe Front
    Capacity
     1.26 yd³
    Width
     89.1 in
    Weight
     966.1 lb
  • 457 mm (18 in), Pin On - Buckets - Backhoe Rear
    Capacity
     4.2 ft³
    Width
     18 in
    Weight
     253.5 lb
  • 18 - Motor Graders
    Base Power (1st Gear) - Net
     304 HP
    Operating Weight - Typically Equipped
     74324 lb
    Blade Width
     18 ft
  • G332 Demolition & Sorting Grapple: 587-8994 - Grapples
    Capacity
     1.18 yd³
    Weight
     4493 lb
  • 72.6 m³ (95.0 yd³) - Blades
    Capacity
     95 yd³
    Width
     265 in
  • 463 mm (18 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     7 ft³
    Width
     18.2 in
    Weight
     551.2 lb
  • 890 mm (35 in) - Bale Spears
    Overall Width
     50.6 in
    Overall Height
     22.4 in
    Capacity
     2004 lb
  • 302.2D - Excavators
    Gross Power - ISO 14396
     24.3 HP
    Operating Weight
     4464 lb
  • DE150 GC (50 Hz) - Electric Power
    Minimum Rating
     150 kVA
    Maximum Rating
     150 kVA
    Emissions/Fuel Strategy
     Non Regulated
  • 794 AC - Off-Highway Trucks
    Gross Power - SAE J1995
     3500 HP

    -
    Top Speed - Loaded
     37 mile/h
  • 1290mm (51in) Ripper - Rippers
    Overall Length
     64.9 in
    Weight
     1755 lb
    Width
     27 in
  • A41 - Augers
    Drive Shaft Torque at Maximum Pressure
     3038.8 lb/ft
    Drive Method
     Gerotor Motor - Single Planetary Reduction
    Mounting Bracket Design
     Mini Excavator
  • T112 Hydraulic Side Shift - Trenchers
    Overall Length
     106.5 in
    Overall Height
     30.9 in
    Overall Width
     74.8 in
  • ATC Contactor Based Bypass Isolation Automatic Transfer Switch - Electric Power
    Rating Range
     100 to 1200A
    Transfer Type
     Bypass Isolation
    Switch Type
     Contactor Based
  • 4.4m³ (5.75yd³) - Buckets - Loader
    Capacity
     5.75 yd³
    Width
     116 in
    Weight
     4200 lb
  • 610 mm (24 in) - Augers
    Diameter
     24 in
    Weight
     149.9 lb
    Overall Length
     48 in
  • MP332 Tank Shear - Multi-Processors
    Length
     87 in
    Height
     78 in
    Width
     40 in
  • G3412 - Industrial
    Maximum Power
     637 HP

    -
    Weight - Net Dry
     2141 kg (4720 lb)
  • 988K Steel Mill Arrangement - Wheel Loaders
    Net Power
     541 HP
    Operating Weight
     112574 lb
    Bucket Capacities
     5.4-6.3 m3 (7.0-8.3 yd3)
  • ENGINE OIL FILTERS

     -

    -
  • 335 - Excavators

     -
    Operating Weight
     77000 lb
  • 3516C Industrial Power Unit - Industrial
    Maximum Power
     2100 HP
    Rated Speed
     1750 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     7840 kg (17,284 lb)
  • 2036 mm (80 in), Bolt-On Teeth - Buckets - Skid Steer Loader
    Capacity
     0.63 yd³
    Width
     80.2 in
    Weight
     582 lb
  • 610 mm (24 in), Pin On - Buckets - Backhoe Rear
    Capacity
     5 ft³
    Width
     24 in
    Weight
     383.6 lb
  • SW345B, 76 mm (3 in) - Saws
    Length
     85 in
    Overall Height
     57 in
    Overall Width
     73 in
  • C1.5 (50 Hz) - Electric Power
    Minimum Rating
     10.0 kVA
    Maximum Rating
     13.5 kVA
    Emissions/Fuel Strategy
     EU Stage IIIA
  • 7.4m (9.7)yd Extreme Duty - Buckets - Mining Shovels

     -

    -
  • 1.0 m3 (1.3 yd3), Pin On - Buckets - Backhoe Front
    Capacity
     1.26 yd³
    Width
     89.1 in
    Weight
     965 lb
  • 3516E - Marine Power Systems

     -

    -
    Aspiration
     TA
  • ATC Service Entrance Rated MCCB & Power Breaker Based ATS - Electric Power
    Rating Range
     30-5000A
    Transfer Type
     Open / Closed / Delayed
    Switch Type
     Molded Case and Power Breaker
  • 9.66 m³ (13 yd³) - Blades
    Capacity
     12.6 yd³
    Width
     168 in
  • 1730 mm (68 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.63 yd³
    Width
     68.1 in
    Weight
     568.8 lb
  • 816 - Compactors
    Gross Power (SAE J1995:2014)
     284 HP
    Operating Weight
     57345 lb
  • 3.05 m (10 ft) - Snow Pushes
    Weight
     1803.4 lb
    Overall Height
     38.4 in
    Working Width
     120 in
  • 152 mm (6 in) - Augers
    Diameter
     6 in
    Weight
     57.3 lb
    Overall Length
     48.2 in
  • CAT® SYSTEMONE

     -

    -
  • MP365 Pulverizer Jaw - Multi-Processors

     -

    -
  • 313 - Excavators

     -
    Operating Weight
     30400 lb
  • 980 3-Wedge - Couplers - Loader
    Width
     65.9 in
    Height
     34.4 in
    Weight
     2750 lb
  • 992K - Wheel Loaders
    Net Power
     814 HP
    Operating Weight
     220089 lb
    Bucket Capacities
     10.7-12.3 m3 (14-16 yd3)
  • CG170-12 K - Electric Power
    Fuel Type
     Natural Gas, Biogas, Coal Gas
    Frequency
     50 or 60 Hz
  • 305 mm (12 in), Pin On - Buckets - Backhoe Rear
    Capacity
     2.8 ft³
    Width
     12 in
    Weight
     213.8 lb
  • 10.7m³ (14yd³) - Buckets - Loader
    Capacity
     14 yd³
    Width
     203 in
    Weight
     30247 lb
  • T109 Manual Side Shift - Trenchers
    Overall Length
     92.4 in
    Overall Height
     30.9 in
    Overall Width
     56.1 in
  • 1.0 m3 (1.3 yd3) Pin On - Buckets - Backhoe Front
    Capacity
     1.3 yd³
    Width
     89.1 in
    Weight
     1593 lb
  • 2188 mm (86 in) w/Spill Guard, Bolt-On Teeth - Buckets - Skid Steer Loader
    Capacity
     0.56 yd³
    Width
     86.1 in
    Weight
     1018.5 lb
  • 30.6 m³ (40.0 yd³) - Blades
    Capacity
     40 yd³
    Width
     224 in
  • 1140 mm (45 in) - Bale Spears
    Overall Width
     55.4 in
    Overall Height
     51.8 in
    Capacity
     3007.1 lb
  • COOLANTS

     -

    -
  • C27 - Industrial
    Maximum Power
     1150 HP
    Rated Speed
     1800-2100 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     2946 kg (6495 lb)
  • 18m³ (23.5yd³) - Buckets - Loader
    Capacity
     23.5 yd³
    Width
     245 in
    Weight
     47139 lb
  • 744mm (29in) Ripper - Rippers
    Overall Length
     38 in
    Weight
     439 lb
    Width
     11.4 in
  • 610 mm (24 in) Pin On - Buckets - Backhoe Rear
    Capacity
     8.5 ft³
    Width
     24 in
    Weight
     394.6 lb
  • 1883 mm (74 in) w/Spill Guard, Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.48 yd³
    Width
     74.1 in
    Weight
     961.2 lb
  • 1730 mm (68 in) w/Spill Guard, Bolt-On Teeth - Buckets - Skid Steer Loader
    Capacity
     0.44 yd³
    Width
     68.1 in
    Weight
     868.6 lb
  • 457 mm (18 in) - Buckets - Excavator
    Rated Capacity
     3.1 yd³
    Width
     18 in
    Weight
     194 lb
  • MP324 Pulverizer Jaw - Multi-Processors

     -

    -
  • C11 - Industrial
    Maximum Power
     385 HP
    Rated Speed
     1800-2100 rpm
    Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     1692 kg (3730 lb)
  • 1.0 m3 (1.31 yd3), IT Coupler, Bolt-On Cutting Edge - Buckets - Backhoe Front
    Capacity
     1.31 yd³
    Width
     94.7 in
    Weight
     1168.9 lb
  • 600 mm (24 in) - Buckets - Excavator
    Capacity
     1.9 ft³
    Width
     23.6 in
    Weight
     100.1 lb
  • M 25 E - Marine Power Systems
    Power Range
     2100-3150 kW
    Speed Range
     720-750 rpm
    Emissions
     IMO II / IMO III with SCR
  • 610 mm (24 in), Pin On - Buckets - Backhoe Rear
    Capacity
     9.5 ft³
    Width
     24 in
    Weight
     546.7 lb
  • 3612 - Industrial
    Maximum Power
     4962 HP
    Rated Speed
     750-1000 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     25,140 kg (55,300 lb)
  • DG60-2 (3 Phase) - Electric Power
    Fuel System
     Natural Gas / LP Vapor
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • 3.66 m (12 ft) - Snow Pushes
    Weight
     2184.8 lb
    Overall Height
     38.4 in
    Working Width
     144 in
  • 1200 mm (47 in) - Buckets - Excavator
    Rated Capacity
     5.6 yd³
    Width
     47.2 in
    Weight
     357.8 lb
  • CW-20S - Couplers - Excavator
    Weight
     418 lb
    Width
     16.8 in
    Load Rating, Hoisting Hook
     11 ton (US)
  • 1812 mm (71 in), ISO - Forks
    Carriage Width
     71.3 in
    Grapple Height
     102.6 in
    Grapple Weight
     3741.2 lb
  • C7.1 Tier 3 / IMO II - Marine Power Systems
    Maximum Rating
     425 BHP
    Rated Engine Speed
     2300 - 2700 rpm
    Emissions
     U.S. EPA Tier 3 / IMO II emissions certified (commercial), RCD 2016 compliant, EU Stage IIIA compliant, CCNR Stage II through reciprocity with EU Stage IIIA
  • G318 WH Demolition & Sorting Grapple: 587-8975 - Grapples
    Capacity
     1.05 yd³
    Weight
     3190 lb
  • 457 mm (18 in), Pin On - Buckets - Backhoe Rear
    Capacity
     6.4 ft³
    Width
     18 in
    Weight
     321.9 lb
  • CB2.7 - Compactors
    Gross Power
     30.7 HP
    Operating Weight
     5533 lb
    Standard Compaction Width
     47 in
  • 7.7m³ (10yd³) Performance Series - Buckets - Loader
    Capacity
     10 yd³
    Width
     158 in
    Weight
     11713 lb
  • S2070 Straight Scrap & Demolition Shear - Shears
    Length
     153 in
    Height
     70 in
    Width
     28 in
  • 336 GC - Excavators
    Engine Power - ISO 9249
     273 HP
    Operating Weight
     80500 lb
  • 8.2m³ (10.75yd³) Performance Series - Buckets - Loader
    Capacity
     10.75 yd³
    Width
     143 in
    Weight
     7970 lb
  • G212 GC Demolition & Sorting Grapple: 587-8632 - Grapples
    Capacity
     0.52 yd³
    Weight - Including Bracket
     2303.83 lb
  • 1893 mm (75 in) - Blades
    Overall Width
     74.5 in
    Weight
     690 lb
  • GREASES

     -

    -
  • 6.9m³ (9yd³) Serrated Edge - Buckets - Loader
    Capacity
     9 yd³
    Width
     156 in
    Weight
     10540 lb
  • 1.1 m3 (1.4 yd3), Pin On, Bolt-On Teeth - Buckets - Backhoe Front
    Capacity
     1.4 yd³
    Width
     89.1 in
    Weight
     1063.1 lb
  • 986H - Couplers - Loader
    Width
     67.5 in
    Height
     33 in
    Weight
     2686 lb
  • 16 - Motor Graders
    Base Power (1st Gear) - Net
     290 HP
    Operating Weight - Typically Equipped
     71454 lb
    Blade Width
     16 ft
  • HYDRAULIC

     -

    -
  • 1000 mm (39 in) - Buckets - Excavator
    Capacity
     6 ft³
    Width
     39.4 in
    Weight
     258.6 lb
  • CV117 - Compactors
    Drum Width
     66 in
    Weight
     2063.5 lb
    Required Hydraulics
     Standard Flow
  • 330 GC - Excavators
    Engine Power - ISO 9249
     202 HP
    Operating Weight
     67700 lb
  • 3.8m³ (5yd³) - Buckets - Loader
    Capacity
     5 yd³
    Width
     115 in
    Weight
     3280 lb
  • 1.6 m3 (2.1 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
     2.1 yd³
    Width
     94.5 in
    Weight
     1492.1 lb
  • M322F (2017) - Excavators

     -
    Operating Weight*
     20 800 to 22 330 kg (45,856 to 49,229 lb)
  • HM208 - Mulchers
    Overall Width
     40.4 in
    Weight
     1080.3 lb
    Required Hydraulics
     Standard Flow
  • C18 (50 Hz) - Electric Power
    Minimum Rating
     550 kVA
    Maximum Rating
     715 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption, U.S. EPA Certified for Stationary Emergency Use Only (Tier 2 Nonroad Equivalent Emission Standards), China Nonroad III Emission Standards
  • 3512C HD - Marine Power Systems
    Power Range
     1340-2366 bhp (1000-1765 bkW)
    Speed Range
     1600-1800 rpm
    Emissions
     EPA Tier 3, IMO II
  • DE88 GC (60 Hz) - Electric Power
    Minimum Rating
     80 ekW
    Maximum Rating
     80 ekW
    Emissions/Fuel Strategy
     Non Regulated
  • 2.7 m3 (3.5 yd3), Pin On - Buckets - Loader
    Capacity
     3.5 yd³
    Width
     99.5 in
    Weight
     2134.1 lb
  • C7.1 Tier 3 / IMO II - Marine Power Systems

     -

    -
    Aspiration
     Turbocharged-aftercooled aspiration
  • 1.7 m3 (2.2 yd3), Fusion™ Coupler, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
     2.2 yd³
    Width
     94.5 in
    Weight
     1519 lb
  • 3.2 m3 (4.2 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     4.5 yd³
    Width
     108.1 in
    Weight
     2844 lb
  • M 25 C - Marine Power Systems
    Power Range
     1740-3000 kW
    Speed Range
     720-750 rpm
    Emissions
     IMO II
  • 340 Long Reach - Excavators
    Gross Power - ISO 14396
     314 HP
    Operating Weight
     96700 lb
  • 330 mm (13 in) - Buckets - Excavator
    Rated Capacity
     3.5 yd³
    Width
     13 in
    Weight
     299.8 lb
  • 938M - Wheel Loaders
    Rated Net Power
     182 HP
    Operating Weight
     35778 lb
    Bucket Capacities
     2.5-5.0 m³ (3.2-6.5 yd³)
  • DE400 GC - Electric Power
    Minimum Rating
     400 kVA
    Maximum Rating
     400 kVA
    Emissions/Fuel Strategy
     Non-Certified Emissions
  • CW-30S - Couplers - Excavator
    Weight
     462 lb
    Width
     16.8 in
    Load Rating, Hoisting Hook
     11 ton (US)
  • RUBBER TRACKS

     -

    -
  • 390F - Excavators
    Engine Power - ISO 9249
     524 HP
    Operating Weight
     198070 lb
  • 1200 mm (47 in) - Buckets - Excavator
    Rated Capacity
     8.19 yd³
    Width
     47.2 in
    Weight
     381 lb
  • 789D - Off-Highway Trucks
    Gross Power - SAE J1995
     2100 HP

    -
    Top Speed - Loaded
     35.5 mile/h
  • 854K - Dozers
    Gross Power
     907 HP
    Operating Weight
     224254 lb
  • 301.6 - Excavators
    Gross Power - ISO 14396
     21.6 HP
    Operating Weight
     4317 lb
  • 10m³ (13.1yd³) Standard Rock - Buckets - Mining Shovels

     -

    -
  • DG175 GC (Single-phase) - Electric Power
    Fuel System
     Carburetor, Down Draft
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • 2.44 m (8 ft) - Snow Pushes
    Weight
     1082.5 lb
    Overall Height
     39.1 in
    Working Width
     96 in
  • 762 mm (30 in), Pin On - Buckets - Backhoe Rear
    Capacity
     12.4 ft³
    Width
     30 in
    Weight
     610.7 lb
  • 0.85 m3 (1.1 yd3) - Buckets - Telehandler
    Rated Bucket Capacity
     1.1 yd³
    Width
     92 in
    Bucket Weight
     1389 lb
  • 3406C - Industrial
    Maximum Power
     465 HP
    Rated Speed
     1800-2100 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     1300 kg (2866 lb)
  • 777G WTR Bare chassis - Off-Highway Trucks

     -

    -
  • 3406C - Industrial
    Maximum Power
     482 HP
    Rated Speed
     1750-2300 rpm
  • 890 mm (35 in) - Bale Spears
    Overall Width
     55.4 in
    Overall Height
     51.8 in
    Capacity
     3007.1 lb
  • 762 mm (30 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     12.7 ft³
    Width
     30 in
    Weight
     489.4 lb
  • C4.4 - Industrial
    Maximum Power
     200 HP
    Rated Speed
     2200 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     400-420 kg (881.8-926 lb)
  • 63.46 m³ (83.0 yd³) - Blades
    Capacity
     83 yd³
    Width
     270 in
  • 4.6m³ (6.0yd³) Heavy Rock - Buckets - Mining Shovels

     -

    -
  • 10.7m³ (14yd³) - Buckets - Loader
    Capacity
     14 yd³
    Width
     190 in
    Weight
     20684 lb
  • 988K XE - Wheel Loaders
    Net Power
     541 HP
    Operating Weight
     116362 lb
    Bucket Capacities
     4.7-13 m3 (6.2-17 yd3)
  • 5.7m³ (7.5yd³) - Buckets - Loader
    Capacity
     7.5 yd³
    Width
     130 in
    Weight
     3800 lb
  • BA118C Manual - Brooms
    Overall Width
     103.8 in
    Sweeping Width
     83.4 in
    Brush Diameter
     32.1 in
  • 9m³ (11.8yd³) Heavy Rock - Buckets - Mining Shovels

     -

    -
  • Heavy Duty Bucket 2300 mm (91 in): 543-2769 - Buckets - Excavator
    Capacity
     6.93 yd³
    Width
     91 in
    Weight
     9797 lb
  • 6.4m³ (8.3yd³) Performance Series - Buckets - Loader
    Capacity
     8.3 yd³
    Width
     158 in
    Weight
     10877 lb
  • 914 mm (36 in), Pin On - Buckets - Backhoe Rear
    Capacity
     10.3 ft³
    Width
     36 in
    Weight
     363.8 lb
  • 1525 mm (60 in) - Forks
    Fork Tine Width
     6 in
    Fork Tine Thickness
     2.36 in
    Fork Tine Length
     60 in
  • VM 46 DF - Marine Power Systems
    Power Range
     10800 - 15440 kW
    Speed Range
     500 / 514 rpm
    Emissions
     IMO II in diesel mode / IMO III in gas mode
  • 2036 mm (80 in) w/Spill Guard, Bolt-On Teeth - Buckets - Skid Steer Loader
    Capacity
     0.52 yd³
    Width
     80.2 in
    Weight
     970 lb
  • G318 Demolition & Sorting Grapple: 587-8965 - Grapples
    Capacity
     0.98 yd³
    Weight - Including Bracket
     4125 lb
  • 1.03 m3 (1.35 yd3) Pin On - Buckets - Backhoe Front
    Capacity
     1.29 yd³
    Width
     89.1 in
    Weight
     1819 lb
  • 3516E - Industrial
    Maximum Power
     2100 HP
    Rated Speed
     1650 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     18025 lb
  • 1524 mm (60 in) - Forks
    Carriage Width
     98.3 in
    Carriage Height
     52 in
    Carriage Weight
     1172.9 lb
  • 299D3 XE - Skid Steer Loaders
    Gross Power - SAE J1995
     110 HP
    Operating Weight
     11756 lb
  • 3512C Tier 3 - Marine Power Systems
    Power Range
     1340-2366 bhp (1000-1765 bkW)
    Speed Range
     1600-1800 rpm
    Emissions
     EPA Tier 3, IMO II
  • DG100-2S (Single Phase) - Electric Power
    Fuel System
     Natural Gas / LP Vapor
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • 762 mm (30 in) - Augers
    Diameter
     30 in
    Weight
     282.2 lb
    Overall Length
     50.3 in
  • 460 mm (18 in) - Buckets - Excavator
    Capacity
     1.89 ft³
    Width
     18.1 in
    Weight
     118.8 lb
  • 236D3 - Skid Steer Loaders
    Gross Power - SAE J1995
     74.3 HP
    Operating Weight
     6567 lb
    Rated Operating Capacity
     1800 lb
  • 1.07 m3 (1.4 yd3), Pin On - Buckets - Backhoe Front
    Capacity
     1.4 yd³
    Width
     89.1 in
    Weight
     1011.9 lb
  • M 25 E - Marine Power Systems
    Maximum Rating
     3024 kWe (3938 kVA)
    Minimum Rating
     2016 kWe (2625 kVA)
  • C9 (50 Hz) - Electric Power
    Minimum Rating
     230 kVA
    Maximum Rating
     330 kVA
    Emissions/Fuel Strategy
     EU Stage IIIA, Low Fuel Consumption, U.S. EPA Certified for Stationary Emergency Use only ( Tier 3 Nonroad Equivalent Emission Standards)
  • M318 - Excavators

     -
    Operating Weight Maximum
     43980 lb
  • M314 - Excavators

     -
    Operating Weight Maximum
     39683 lb
  • 2490 mm (98 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     1.64 yd³
    Width
     98 in
    Weight
     881.8 lb
  • 730C2 Bare Chassis - Articulated Trucks
    Gross Power - SAE J1995
     375 HP
    Rated Payload
     31 t
  • TH3510D Ag Handler - Telehandlers
    Maximum Lift Height
     32.2 ft
    Operating Weight - With Carriage and Forks*
     20170 lb
    Rated Load Capacity
     7716 lb
  • 610 mm (24 in) - Augers
    Diameter
     24 in
    Weight
     202.8 lb
    Overall Length
     50.7 in
  • 2738mm (108in) - Forks
    Fork Width
     95 in
    Inside Height
     75 in
    Weight
     22921 lb
  • 3516B (50 Hz) - Electric Power
    Minimum Rating
     1750 kVA
    Maximum Rating
     2250 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption, Low Emissions
  • DE50 GC (60 Hz) - Electric Power
    Minimum Rating
     45 ekW
    Maximum Rating
     45 ekW
    Emissions/Fuel Strategy
     Non Regulated
  • 239D - Compact Track and Multi Terrain Loaders
    Gross Power - SAE J1995
     67.1 HP
    Operating Weight
     7289 lb
  • 3.66 m (12 ft) - Snow Pushes
    Weight
     2782.2 lb
    Overall Height
     44.4 in
    Working Width
     144 in
  • C1.5 - Industrial
    Maximum Power
     24.6 HP
    Rated Speed
     2200/2800 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     148 kg (327 lb)
  • 427F2 - Backhoe Loaders
    Power - Net
     70 HP
    Operating Weight - Nominal
     17875 lb
    Operating Weight - Maximum
     24251 lb
  • CYLINDERS

     -

    -
  • GSH520 5-Tine, 750-Liter Orange Peel Grapple - Grapples
    Capacity
     1 yd³
    Operating Weight
     3166 lb
  • 3.25m³ (4.25yd³) - Buckets - Loader
    Capacity
     4.25 yd³
    Width
     115 in
    Weight
     4715 lb
  • G3406 - Electric Power
    Fuel Type
     Natural Gas, Biogas, Field Gas, Propane
    Frequency
     50 or 60 Hz
  • 7.7m³ (10yd³) Performance Series - Buckets - Loader
    Capacity
     10 yd³
    Width
     158 in
    Weight
     11603 lb
  • GSH455 4-Tine, 1500-Liter Orange Peel Grapple - Grapples
    Capacity
     2 yd³
    Operating Weight
     5763 lb
  • CW-55S - Couplers - Excavator
    Weight
     1210 lb
    Width
     22 in
    Load Rating, Hoisting Hook
     22 ton (US)
  • 914 mm (36 in) - Augers
    Diameter
     36 in
    Weight
     381.4 lb
    Overall Length
     50.3 in
  • MP324 Tank Shear - Multi-Processors
    Length
     84 in
    Height
     62 in
    Width
     31 in
  • 696mm (27in) Ripper - Rippers
    Overall Length
     36.5 in
    Weight
     353 lb
    Width
     14.2 in
  • CW-55 - Couplers - Excavator
    Weight
     1540 lb
    Width
     33.2 in
    Load Rating, Hoisting Hook
     22 ton (US)
  • 1481mm (58in) Ripper - Rippers
    Overall Length
     77.3 in
    Weight
     3569 lb
    Width
     34.8 in
  • Engine Paralleling and Integration Control (EPIC) - Electric Power
    Configuration
     Remote modular paralleling control system (Master Control Panel for the first 2 generator sets and optional tie breaker, separate add-on control panels for up to 8 additional generator sets, utility paralleling control, and distribution control)
    Modes of Operation
     Emergency Standby with redundant master control, Utility paralleling, peak shaving, and closed transition to/from Generator Power (with optional utility control panel)
    Application
     LV and MV (208V-27kV)
  • 1883 mm (74 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.54 yd³
    Width
     74.1 in
    Weight
     546.7 lb
  • 9.2m³ (12yd³) Performance Series - Buckets - Loader
    Capacity
     12 yd³
    Width
     182 in
    Weight
     16211 lb
  • 1.6 m3 (2.1 yd3), ISO Coupler, Bolt-On Teeth - Buckets - Compact Wheel Loader
    Rated Capacity
     2.6 yd³
    Width
     95.6 in
    Weight
     1341 lb
  • 23.32 m³ (30.5 yd³) - Blades
    Capacity
     30.5 yd³
    Width
     194 in
  • ATC Molded Case Circuit Breaker & Molded Case Switch ATS - Electric Power
    Rating Range
     30-1000A
    Transfer Type
     Open transition
    Switch Type
     Molded Case
  • 762 mm (30 in) Pin On - Buckets - Backhoe Rear
    Capacity
     11.3 ft³
    Width
     30 in
    Weight
     434.3 lb
  • G212 GC Demolition & Sorting Grapple: 587-8643 - Grapples
    Capacity
     0.52 yd³
    Weight
     1396 lb
  • C9.3B - Industrial
    Maximum Power
     400 HP
    Rated Speed
     1800-2200 rpm
    Weight - Approximate, Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     1678-1839 kg (3699-4055 lb)
  • C280-8 Tier 4 - Marine Power Systems
    Power Range
     3299-3634 bhp (2460-2530 bkW)
    Speed Range
     1000 rpm
    Emissions
     EPA Tier 4, IMO III
  • 8.6m (11.2)yd General Duty - Buckets - Mining Shovels

     -

    -
  • AD45 - Underground - Hard Rock
    Engine Gross Power - ISO 14396
     599 HP
    Loaded - Front Axle
     46.8%
    Nominal Payload Capacity
     99208 lb
  • M 32 C - Marine Power Systems
    Maximum Rating
     4316 kWe (5400 kVA)
    Minimum Rating
     2762 kWe (3456 kVA)
  • 914 mm (36 in) - Buckets - Excavator
    Rated Capacity
     7.8 yd³
    Width
     36 in
    Weight
     321.9 lb
  • C2.2 - Industrial
    Maximum Power
     66 HP
    Rated Speed
     2200-3000 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     184-194 kg (406-427.7 lb)
  • 2185 mm (86 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     1.1 yd³
    Width
     86 in
    Weight
     747.4 lb
  • DE88 GC (50 Hz) - Electric Power
    Minimum Rating
     88 kVA
    Maximum Rating
     88 kVA
    Emissions/Fuel Strategy
     Non Regulated
  • 735 - Articulated Trucks
    Gross Power - SAE J1995
     434 HP
    Rated Payload
     35.3 ton (US)
    Heaped (SAE 2:1)
     26.2 yd³
  • 814K - Dozers
    Net Power
     248 HP
    Operating Weight
     48390 lb
  • 1.0 m3 (1.3 yd3), IT Coupler, Bolt-On Cutting Edge - Buckets - Backhoe Front
    Capacity
     1.29 yd³
    Width
     89.1 in
    Weight
     1677.1 lb
  • CG170-12 - Electric Power
    Fuel Type
     Natural Gas, Biogas, Coal Gas
    Frequency
     50 or 60 Hz
  • VM 46 DF - Marine Power Systems
    Maximum Rating
     14807 kWe (18528 kVA)
    Minimum Rating
     10357 kWe (12960 kVA)
  • C13 - Industrial
    Maximum Power
     520 HP
    Rated Speed
     1800-2100 rpm
    Weight - Approximate, Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     2085-2304 kg (4596-5080 lb)
  • D9 - Dozers
    Engine Power - Net SAE J1349/ISO 9249
     452 HP
    Operating Weight
     110225 lb
  • 1000 mm (39 in) - Buckets - Excavator
    Rated Capacity
     3.11 yd³
    Width
     39.4 in
    Weight
     128.3 lb
  • CB8 - Compactors
    Gross Power
     100 HP
    Operating Weight
     18783 lb
    Standard Compaction Width
     67 in
  • C32 - Industrial
    Maximum Power
     1200 HP
    Rated Speed
     1800 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     6625 lb
  • 1.14 m3 (1.5 yd3) Pin On - Buckets - Backhoe Front
    Capacity
     1.5 yd³
    Width
     95.5 in
    Weight
     2455.9 lb
  • 1.34 m3 (1.75 yd3), Pin On - Buckets - Backhoe Front
    Capacity
     1.75 yd³
    Width
     95.8 in
    Weight
     1472.9 lb
  • 5.0 m3 (6.5 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     6.5 yd³
    Width
     108.1 in
    Weight
     3300.3 lb
  • 13.38 m³ (17.5 yd³) - Blades
    Capacity
     17.5 yd³
    Width
     168 in
  • C280-12 - Marine Power Systems
    Maximum Rating
     3640 ekW (4550 kVA)
    Minimum Rating
     3520 ekW (4400 kVA)
    Frequency
     50 Hz or 60 Hz
  • MP318 Demolition Jaw - Multi-Processors
    Length
     76 in
    Height
     54 in
    Width
     31 in
  • 320 GC - Excavators
    Engine Power - ISO 9249
     146 HP
    Operating Weight
     48281 lb
  • 3516C - Industrial
    Maximum Power
     2100 HP
    Rated Speed
     1750 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     7840 kg (17284 lb)
  • CG260-16 - Electric Power
    Fuel Type
     Natural Gas
    Frequency
     50 / 60 Hz
  • DG450 GC (3 phase) - Electric Power
    Fuel System
     Carburetor, Down Draft
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • CW-45 - Couplers - Excavator
    Weight
     946 lb
    Width
     27.6 in
    Load Rating, Hoisting Hook
     15.4 ton (US)
  • 2.7 m3 (3.5 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     3.5 yd³
    Width
     108.1 in
    Weight
     2685.2 lb
  • 305 mm (12 in) - Buckets - Excavator
    Rated Capacity
     1.7 yd³
    Width
     12 in
    Weight
     143.3 lb
  • 988K - Couplers - Loader
    Width
     78.7 in
    Height
     33.8 in
    Weight
     3523 lb
  • 5.0 m3 (6.5 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     6.5 yd³
    Width
     119.3 in
    Weight
     4973.6 lb
  • 313 GC - Excavators

     -
    Operating Weight
     30400 lb
  • 1000 mm (39 in) - Buckets - Excavator
    Capacity
     101.9 l
    Width
     39.4 in
    Weight
     172.4 lb
  • 826K - Compactors
    Gross Power
     435 HP
    Operating Weight
     90207 lb
  • QI442/HS

     -

    -
  • 340 - Excavators
    Engine Power - ISO 9249
     311 HP
    Operating Weight
     Heavy-duty High Wide undercarriage, Reach boom, R3.2DB (10'6") stick, GD 2.27 m3 (2.97 yd3) bucket, 600 mm (24") HD triple grouser shoes, 7.56 mt (16,700 lb) counterweight.
  • 914 mm (36 in), Pin On - Buckets - Backhoe Rear
    Capacity
     15.5 ft³
    Width
     36 in
    Weight
     703.3 lb
  • 216B3 - Skid Steer Loaders
    Gross Power - SAE J1995
     51 HP
    Operating Weight
     5690 lb
    Rated Operating Capacity
     1400 lb
  • 8.5m³ (11.1yd³) Heavy Rock - Buckets - Mining Shovels

     -

    -
  • LR18B - Rakes
    Bucket Capacity - Struck
     0.4 yd³
    Weight
     1439.6 lb
    Length
     63.8 in
  • 1883 mm (74 in) w/Spill Guard, Bolt-On Teeth - Buckets - Skid Steer Loader
    Capacity
     0.48 yd³
    Width
     74.1 in
    Weight
     917.1 lb
  • C15 - Industrial
    Maximum Power
     595 HP
    Rated Speed
     1800-2100 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     1469 kg (3239 lb)
  • 973K - Track Loaders
    Net Power - ISO 9249/SAE J1349
     275 HP
    Operating Weight
     63900 lb
    Capacity - General Purpose
     4.2 yd³
  • CC34B - Compactors
    Gross Power
     49.1 HP
    Operating Weight
     7446 lb
    Standard Compaction Width
     51 in
  • GSH425 4-Tine, 1150-Liter Orange Peel Grapple - Grapples
    Capacity
     1.5 yd³
    Operating Weight
     3666 lb
  • 340F UHD - Excavators
    Gross Power - SAE J1995
     238 kW (324 PS)
    Operating Weight
     100310 lb
  • BA30 Hydraulic - Brooms
    Overall Width
     126 in
    Sweeping Width
     118.1 in
    Brush Diameter
     36 in
  • 3.4m³ (4.5yd³) - Buckets - Loader
    Capacity
     4.5 yd³
    Width
     106 in
    Weight
     2628 lb
  • MP332 Concrete Cutter Jaw - Multi-Processors
    Length
     85.6 in
    Height
     1864 mm
    Width
     39.6 in
  • 2.5 m3 (3.25 yd3) - Buckets - Telehandler
    Rated Bucket Capacity
     3.25 yd³
    Width
     98 in
    Bucket Weight
     1159 lb
  • 1576 mm (62 in) w/Spill Guard, Bolt-On Teeth - Buckets - Skid Steer Loader
    Capacity
     0.39 yd³
    Width
     62 in
    Weight
     817.9 lb
  • 305 mm (12 in) - Augers
    Diameter
     13.5 in
    Weight
     41 lb
    Overall Length
     9.8 in
  • 432F2 - Backhoe Loaders
    Power - Net
     95.2 HP
    Operating Weight - Nominal
     18693 lb
    Operating Weight - Maximum
     24251 lb
  • 10.7m³ (14yd³) - Buckets - Loader
    Capacity - Adapters
     14 yd³
    Width
     200 in
    Weight
     25485 lb
  • 988K - Wheel Loaders
    Net Power
     541 HP
    Operating Weight
     112574 lb
    Bucket Capacities
     4.7-13 m3 (6.2-17 yd3)
  • 301.5 - Excavators
    Gross Power - ISO 14396
     21.6 HP
    Operating Weight
     3913 lb
  • 490 mm (19 in) - Rippers
    Overall Length
     25.9 in
    Weight
     99.2 lb
    Width
     10 in
  • MP324 Demolition Jaw - Multi-Processors
    Length
     82 in
    Height
     63 in
    Width
     31 in
  • VM 32 E - Marine Power Systems
    Power Range
     6360 - 8960 kW
    Speed Range
     720/750 rpm
    Emissions
     IMO II
  • C32 IMO III - Marine Power Systems
    Maximum Rating
     1332 BHP
    Minimum Rating
     1047 BHP
    Aspiration
     Turbocharged-aftercooled
  • 1.6 m3 (2.1 yd3), IT Coupler, Bolt-On Teeth - Buckets - Compact Wheel Loader
    Rated Capacity
     2.4 yd³
    Width
     95.6 in
    Weight
     1300.9 lb
  • 3054C - Industrial
    Maximum Power
     130 HP
    Rated Speed
     2200-2400 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     291-306 kg (640-674.6 lb)
  • B6s - Hammers

     -

    -
  • 3516C (50 Hz) - Electric Power
    Minimum Rating
     2500 kVA
    Maximum Rating
     2750 kVA
    Emissions/Fuel Strategy
     Low Fuel, Low Emissions
  • 11m³ (14.4yd³) Standard Rock - Buckets - Mining Shovels

     -

    -
  • CW-40S - Couplers - Excavator
    Weight
     473 lb
    Width
     16.8 in
    Load Rating, Hoisting Hook
     11 ton (US)
  • PR172 Hydraulic Angle - Rakes
    Overall Width
     81 in
    Weight
     925.9 lb
    Overall Length
     64 in
  • 990K Millyard Arrangement - Wheel Loaders
    Net Power
     699 HP
    Operating Weight
     202398 lb
  • 23.70 m³ (31.0 yd³) - Blades
    Capacity
     31 yd³
    Width
     217 in
  • SW360B, 203 mm (8 in) - Saws
    Length
     93 in
    Overall Height
     70 in
    Overall Width
     73 in
  • CM46DF V-Type - Electric Power
    Minimum Rating
     10580 kWe
    Maximum Rating
     14110 kWe
    Emissions/Fuel Strategy
     (WB) Cert stage 1 and 2
  • 1801mm (71in) Ripper - Rippers
    Overall Length
     90.6 in
    Weight
     4597 lb
    Width
     39.1 in
  • HOSE & COUPLINGS

     -

    -
  • C9 - Industrial
    Maximum Power
     350 HP
    Rated Speed
     1800-2200 rpm
    Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     1490 kg (3285 lb)
  • B8s - Hammers

     -

    -
  • 23m³ (31yd³) - Buckets - Loader
    Capacity
     31 yd³
    Width
     248 in
    Weight
     38880 lb
  • 908M - Wheel Loaders
    Net Power
     74 HP
    Operating Weight
     14032 lb
    Bucket Capacities
     0.75-1.5 m3 (1.0-2.0 yd3)
  • CTGSE & CTGDSE Series Service Rated Entrance Rated ATS - Electric Power
    Rating Range
     40-3000A
    Transfer Type
     Open Transition with Service Entrance
    Switch Type
     Contactor Based
  • 3.4m³ (4.5yd³) Performance Series - Buckets - Loader
    Capacity
     4.5 yd³
    Width
     128 in
    Weight
     5207 lb
  • 1219 mm (48 in) - Forks
    Fork Tine Width
     4 in
    Fork Tine Thickness
     2 in
    Fork Tine Length
     48 in
  • 0.8 m3 (1.0 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     1 yd³
    Width
     74.4 in
    Weight
     813.9 lb
  • 1.1 m3 (1.4 yd3), Bolt-On Teeth - Buckets - Compact Wheel Loader
    Capacity
     1.4 yd³
    Width
     81.1 in
    Weight
     922.4 lb
  • 992mm (39in) Ripper - Rippers
    Overall Length
     50.5 in
    Weight
     728 lb
    Width
     20 in
  • DE150 GC (60 Hz) - Electric Power
    Minimum Rating
     132 ekW
    Maximum Rating
     132 ekW
    Emissions/Fuel Strategy
     Non Regulated
  • D9T WH - Dozers
    Flywheel Power
     436 HP
    Operating Weight
     110471 lb
  • G3516B - Electric Power
    Fuel Type
     Natural Gas
    Frequency
     60 Hz
  • UH550E

     -

    -
  • 1550 mm (61 in) - Fork Accessories

     -

    -
  • 18m³ (23.5yd³) Iron Ore - Buckets - Mining Shovels

     -

    -
  • DG230 GC (3 phase) - Electric Power

     -
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • 500 mm (20 in) - Buckets - Excavator
    Capacity
     2.1 ft³
    Width
     19.7 in
    Weight
     129 lb
  • 1.7 m3 (2.2 yd3), ISO Coupler, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
     2.4 yd³
    Width
     94.5 in
    Weight
     1433 lb
  • 2.7m³ (3.5yd³) Performance Series - Buckets - Loader
    Capacity
     3.5 yd³
    Width
     114 in
    Weight
     3027 lb
  • CTG Series Automatic Transfer Switch - Electric Power
    Rating Range
     40-3000A
    Transfer Type
     Open transition
    Switch Type
     Contactor based
  • 28.3 m³ (37.0 yd³) - Blades
    Capacity
     37 yd³
    Width
     216 in
  • 907M Ag Handler - Wheel Loaders
    Rated Net Power - 2,500 rpm - SAE J1349
     68 HP
    Operating Weight
     12958 lb
    Bucket Capacities
     0.75-1.2 m3 (1.0-1.6 yd3)
  • MP345 Pulverizer Jaw - Multi-Processors

     -

    -
  • 0.9 m3 (1.2 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     1.2 yd³
    Width
     74.4 in
    Weight
     869.1 lb
  • 415-444 Backhoe Loaders Manual - Couplers - Backhoe Rear
    Weight
     191.4 lb
    Drive Method
     Mechanical actuator
    Hydraulic Pressure - Coupler
     n/a
  • 2.5 m3 (3.3 yd3), Pin On - Buckets - Loader
    Capacity
     3.2 yd³
    Width
     107.4 in
    Weight
     2156.1 lb
  • 1070 mm (42 in) - Fork Accessories

     -

    -
  • 1.7 m3 (2.2 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
     2.2 yd³
    Width
     94.5 in
    Weight
     1524.9 lb
  • 1.5 m3 (2.0 yd3), IT Coupler, Bolt-On Teeth - Buckets - Compact Wheel Loader
    Rated Capacity
     2.2 yd³
    Width
     95.6 in
    Weight
     1250 lb
  • B2s - Hammers

     -

    -
  • CV119 - Compactors
    Drum Width
     73 in
    Weight
     2138.5 lb
    Required Hydraulics
     Standard Flow
  • 325 - Excavators

     -
    Operating Weight
     49604 lb
  • 508 mm (20 in) - Buckets - Excavator
    Rated Capacity
     3.6 yd³
    Width
     20 in
    Weight
     207.2 lb
  • 2.1 m3 (2.7 yd3), Pin On - Buckets - Loader
    Capacity
     2.7 yd³
    Width
     99.5 in
    Weight
     1885 lb
  • 762 mm (30 in) - Buckets - Excavator
    Rated Capacity
     8.5 yd³
    Width
     30 in
    Weight
     321.9 lb
  • 906M Ag Handler - Wheel Loaders
    Rated Net Power - 2,500 rpm - SAE J1349
     68 HP
    Operating Weight
     12758 lb
    Bucket Capacities
     0.75-1.2 m3 (1.0-1.6 yd3)
  • 5.9m³ (7.75yd³) - Buckets - Loader
    Capacity
     7.75 yd³
    Width
     130 in
    Weight
     4251 lb
  • 12.2m³ (16yd³) - Buckets - Loader
    Capacity
     16 yd³
    Width
     200 in
    Weight
     28301 lb
  • 1070 mm (42 in) - Fork Accessories

     -

    -
  • 4.26 m (14 ft) - Snow Pushes
    Weight
     3018.1 lb
    Overall Height
     44.4 in
    Working Width
     168 in
  • 4.1 m3 (5.4 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     5.4 yd³
    Width
     119.4 in
    Weight
     4753.2 lb
  • BR218 - Brushcutters
    Overall Width
     74 in
    Cutting Width
     72 in
    Maximum Cutting Diameter
     3 in
  • PR184 Hydraulic Angle - Rakes
    Overall Width
     93 in
    Weight
     1049.4 lb
    Overall Length
     64 in
  • PM822 - Cold Planers
    Rated Power
     800.6 HP
    Operating Weight
     80910 lb
    Milling Width
     88 in
  • 306 CR - Excavators
    Gross Power - ISO 14396
     57.9 HP
    Operating Weight
     15766 lb
  • 600 mm (24 in) - Buckets - Excavator
    Capacity
     2.7 ft³
    Width
     23.6 in
    Weight
     142.6 lb
  • ATC-900 CONTROLLER - Electric Power
    Rating Range
     120 to 600V, single phase and three phase @ 50/60 Hz
    Transfer Type
     Switch application dependent
    Switch Type
     Switch application dependent
  • 308E2 CR - Excavators
    Gross Power - ISO 14396
     66.6 HP
    Operating Weight
     18519 lb
  • 6.8-22 kVA SA Enclosure - Generator Set Enclosures

     -

    -
  • 1883 mm (74 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.68 yd³
    Width
     74.1 in
    Weight
     608.5 lb
  • 773E - Off-Highway Trucks
    Gross Power - SAE J1995
     710 HP
    Nominal Payload Class (100%)
     61 ton (US)
    Top Speed - Loaded
     38.6 mile/h
  • 920 - Wheel Loaders
    Rated Net Power - Rated Engine Speed
     2200 r/min
    Operating Weight
     21742 lb
    Bucket Capacities
     1.3-1.9 m³ (1.7-2.5 yd³)
  • 676 mm (27 in) - Rippers
    Overall Length
     32.4 in
    Weight
     134 lb
    Width
     11.1 in
  • 10.7m³ (14yd³) - Buckets - Loader
    Capacity
     14 yd³
    Width
     200 in
    Weight
     26295 lb
  • PM313 Wheel Undercarriage - Cold Planers
    Rated Power
     336.6 HP
    Operating Weight
     47115 lb
    Milling Width
     51.2 in
  • GSH455 4-Tine, 1000-Liter Orange Peel Grapple - Grapples
    Capacity
     1.5 yd³
    Operating Weight
     5666 lb
  • BR320 - Brushcutters
    Overall Width
     80 in
    Cutting Width
     78 in
    Maximum Cutting Diameter
     3 in
  • 3508C - Marine Power Systems
    Power Range
     775-1100 bhp (578-820 bkW)
    Speed Range
     1200-1600 rpm
    Emissions
     IMO II, EU IW
  • BA118C Hydraulic - Brooms
    Overall Width
     103.8 in
    Sweeping Width
     83.4 in
    Brush Diameter
     32.1 in
  • 4137 mm (163 in) Material Handling Arm, Fusion - Material Handling
    Maximum Load Rating
     19000 lb
    Retracted Length
     109 in
    Extended Length
     163 in
  • MP365 Shear Jaw - Multi-Processors
    Length
     2597 in
    Height
     2133 in
    Width
     1100 in
  • 2.5 m3 (3.3 yd3), Pin On - Buckets - Loader
    Capacity
     3.2 yd³
    Width
     99.5 in
    Weight
     2156.1 lb
  • C0.5 - Industrial
    Maximum Power
     13.7 HP
    Rated Speed
     2000-3600 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     126 lb
  • T112 Hydraulic Side Shift - Trenchers
    Overall Length
     106.5 in
    Overall Height
     30.9 in
    Overall Width
     74.8 in
  • 950K/M-962K/M Fusion™ - Couplers - Loader
    Weight
     1248 lb

    -
  • DG150-2 (3 Phase) - Electric Power
    Fuel System
     Natural Gas / LP Vapor
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • D3K2 Shiphold / Port Handling - Dozers
    Power - Net
     80 HP
    Operating Weight - XL
     18775 lb
  • CD8 - Split Drum - Compactors
    Gross Power
     100 HP
    Operating Weight
     18497 lb
    Standard Compaction Width
     59 in
  • 1.1 m3 (1.4 yd3) Pin On, Bolt-On Cutting Edge - Buckets - Backhoe Front
    Capacity
     1.4 yd³
    Width
     95.5 in
    Weight
     1856.1 lb
  • G324 Demolition & Sorting Grapple: 587-8978 - Grapples
    Capacity
     1.05 yd³
    Weight
     3818 lb
  • CB10 - Compactors
    Gross Power
     131 HP
    Operating Weight
     20945 lb
    Standard Compaction Width
     67 in
  • Oils

     -

    -
  • VM 32 C - Marine Power Systems
    Power Range
     6000-8000 kW
    Speed Range
     720-750 rpm
    Emissions
     IMO II
  • 1085mm (43in) Ripper - Rippers
    Overall Length
     54.5 in
    Weight
     1014 lb
    Width
     20.8 in
  • 3.66 m (12 ft) - Snow Pushes
    Weight
     2634.5 lb
    Overall Height
     42.8 in
    Working Width
     144 in
  • CS76B - Compactors
    Gross Power
     173.7 HP
    Operating Weight - With Cab
     38450 lb
    Compaction Width
     84 in
  • D3K2 Mulcher - Dozers

     -

    -
  • C9 - Industrial
    Maximum Power
     375 HP
    Rated Speed
     1800-2200 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     864 kg (1905 lb)
  • 301.7D - Excavators
    Gross Power - ISO 14396
     24.3 HP
    Operating Weight
     3810 lb
  • S3050 Rotating Scrap & Demolition Shear - Shears
    Length
     176 in
    Height
     58 in
    Width
     42 in
  • H120 GC S - Hammers
    Impact Energy Class
     2950 ft-lb
    Blows per Minute
     400-800
    Maximum Operating Weight
     3927 lb
  • C2.8 - Industrial
    Maximum Power
     74 HP
    Rated Speed
     2200 - 2400 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     750 lb
  • PM313 Track Undercarriage - Cold Planers
    Rated Power
     336.6 HP
    Operating Weight
     48658 lb
    Milling Width
     51.2 in
  • 963D Fusion™ - Couplers - Loader
    Weight
     1413 lb

    -
  • 4.6m³ (6.0yd³) Heavy Rock - Buckets - Mining Shovels

     -

    -
  • 304E2 CR - Excavators
    Gross Power - ISO 14396
     41.8 HP
    Operating Weight
     8996 lb
  • 0.95 m3 (1.25 yd3), IT Coupler, Bolt-On Teeth - Buckets - Backhoe Front
    Capacity
     1.26 yd³
    Width
     89.1 in
    Weight
     1018.1 lb
  • 10m³ (13yd³) Iron Ore - Buckets - Loader
    Capacity
     13 yd³
    Width
     203 in
    Weight
     30940 lb
  • 12m³ (15.7yd³) Heavy Rock - Buckets - Mining Shovels

     -

    -
  • 23.8 m³ (30.8 yd³ ) - Blades
    Capacity
     30.8 yd³
    Width
     193 in
  • C12 ACERT - Marine Power Systems
    Power Range
     660-705 bhp (492-526 bkW)
    Speed Range
     2300 rpm
    Emissions
     IMO II
  • 1829 mm (72 in) - Forks
    Carriage Width
     98.3 in
    Carriage Height
     61 in
    Carriage Weight
     1130.7 lb
  • C18 ACERT Tier 3 - Marine Power Systems
    Power Range
     814-1015 mhp, 803-1001 bhp, 599-747 bkW
    Speed Range
     2100-2300 rpm
    Emissions
     EPA Tier 3, IMO II, EU Stage IIIA
  • 2.8m³ (3.65yd³) - Buckets - Loader
    Capacity
     3.65 yd³
    Width
     106 in
    Weight
     2445 lb
  • 2.9 m3 (3.8 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     3.8 yd³
    Width
     108 in
    Weight
     2758 lb
  • 2036 mm (80 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.63 yd³
    Width
     80.2 in
    Weight
     630.5 lb
  • 798 AC - Off-Highway Trucks
    Gross Power - SAE J1995
     3500 HP

    -
    Top Speed - Loaded
     40 mile/h
  • 3516E Tier 4 / IMO III - Marine Power Systems
    Power Range
     2501-3386 bhp (1865-2525 bkW)
    Speed Range
     1600-1800 rpm
    Emissions
     U.S. EPA Tier 4 Final, IMO III
  • DFS118 - Silage Defacers
    Weight
     937 lb
    Overall Height
     25.2 in
    Overall Width
     72.5 in
  • R1300G - Underground - Hard Rock
    Gross Power - SAE J1995
     165 HP
    Loaded
     60682 lb
    Nominal Payload Capacity
     14991 lb
  • 834K - Dozers
    Net Power
     496 HP
    Operating Weight
     105271 lb
  • MX350 Controller - Electric Power
    Rating Range
     Switch Dependent
    Transfer Type
     Application Dependent
    Switch Type
     Application Dependent
  • 9.5m³ (12.4yd³) Serrated Edge - Buckets - Loader
    Capacity
     12.4 yd³
    Width
     182 in
    Weight
     17910 lb
  • 1.0 m3 (1.3 yd3), IT Coupler, Bolt-On Teeth - Buckets - Backhoe Front
    Capacity
     1.29 yd³
    Width
     89.1 in
    Weight
     1653.9 lb
  • EMCP 4.4 Master Control Panel - Electric Power
    Configuration
     Remote monitoring and control for up to 8 generator sets via high-speed network. Enables paralleling a group of EMCP 4.4 equipped generator sets to a single utility source.
    Modes of Operation
     Emergency standby, island, utility paralleling
    Application
     LV and MV (208V - 38 kV)
  • G318 WH Demolition & Sorting Grapple: 587-8970 - Grapples
    Capacity
     1.31 yd³
    Weight - Including Bracket
     5764 lb
  • C32 ACERT IMO II - Marine Power Systems
    Maximum Rating
     940 ekW (1175 kVA)
    Minimum Rating
     550 eKW (688 kVA)
    Frequency
     50 Hz or 60 Hz
  • Pin Grabber Coupler - Trenching Profile (TB-Linkage): 390-0904 - Couplers - Excavator
    Weight
     2060 lb
    Width - Machine Interface
     25.8 in
    Lifting Eye Working Load Limit
     44092 ton (US)
  • 1219 mm (48 in) - Forks
    Fork Tine Width
     5 in
    Fork Tine Thickness
     2.36 in
    Fork Tine Length
     48 in
  • 762 mm (30 in), Pin On - Buckets - Backhoe Rear
    Capacity
     6.7 ft³
    Width
     30 in
    Weight
     440.9 lb
  • 2.5m³ (3.3yd³) - Buckets - Loader
    Capacity
     3.25 yd³
    Width
     100 in
    Weight
     2211 lb
  • HM418C - Mulchers
    Overall Width
     83.5 in
    Weight
     3196.7 lb
    Required Hydraulics
     XHP / XE
  • VM 32 E - Marine Power Systems
    Maximum Rating
     8593 kWe (10752 kVA)
    Minimum Rating
     6099 kWe (7632 kVA)
  • 7.1m³ (9.25yd³) Performance Series - Buckets - Loader
    Capacity
     9.25 yd³
    Width
     136 in
    Weight
     6146 lb
  • CS54B - Compactors
    Gross Power
     131 HP
    Operating Weight - With Cab
     23265 lb
    Compaction Width
     84 in
  • 988G/H - Couplers - Loader
    Width
     78.7 in
    Height
     40.6 in
    Weight
     3608 lb
  • 1576 mm (62 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.44 yd³
    Width
     62 in
    Weight
     451.9 lb
  • B9s - Hammers

     -

    -
  • D3 - Dozers
    Power - Net
     104 HP
    Operating Weight
     20639.68 lb
  • GSV520 GC 5-Tine, 400-Liter Orange Peel Grapple - Grapples
    Capacity
     0.5 yd³
    Operating Weight
     NAN lb
  • 3.66 m (12 ft) - Snow Pushes
    Weight
     1347 lb
    Overall Height
     39.1 in
    Working Width
     144 in
  • DFS121 - Silage Defacers
    Weight
     1051.6 lb
    Overall Height
     25.2 in
    Overall Width
     84.5 in
  • DE33 GC (50 Hz) - Electric Power
    Minimum Rating
     33.0 kVA
    Maximum Rating
     33.0 kVA
    Emissions/Fuel Strategy
     Non Regulated
  • 6.9m³ (9yd³) Performance Series - Buckets - Loader
    Capacity
     9 yd³
    Width
     158 in
    Weight
     11098 lb
  • 3512C - Marine Power Systems
    Maximum Rating
     1700 eKW (2125 kVA)
    Minimum Rating
     1550 eKW (1937 kVA)
    Frequency
     60 hz
  • 13.4m³ (17.5yd³) - Buckets - Loader
    Capacity
     17.5 yd³
    Width
     172 in
    Weight
     16410 lb
  • C2.2 - Industrial
    Maximum Power
     67.1 HP
    Rated Speed
     2800 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     230 kg (507 lbs)
  • 1524 mm (60 in) - Buckets - Excavator
    Capacity
     420.5 l
    Width
     60 in
    Weight
     557.1 lb
  • 24-220 kVA SA Lvl 2 Enclosure - Generator Set Enclosures

     -

    -
  • 619 mm (24 in) - Buckets - Excavator
    Rated Capacity
     4.6 yd³
    Width
     24.4 in
    Weight
     233.7 lb
  • CC2.6 - Compactors
    Gross Power
     30.7 HP
    Operating Weight
     4982 lb
    Standard Compaction Width
     47 in
  • R2900G - Underground - Hard Rock
    Gross Power - SAE J1995
     409 HP
    Loaded - Front Axle
     110716 lb
    Nominal Payload Capacity
     37920 lb
  • 15m³ (19.6yd³) Heavy Rock - Buckets - Mining Shovels

     -

    -
  • 4.6m³ (6.0yd³) - Buckets - Loader
    Capacity
     6 yd³
    Width
     120 in
    Weight
     6226 lb
  • 2.7 m3 (3.5 yd3), Fusion™ Coupler - Buckets - Loader
    Capacity
     3.5 yd³
    Width
     100 in
    Weight
     2120.8 lb
  • 3.5 m3 (4.6 yd3), Fusion™, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     4.5 yd³
    Width
     108.1 in
    Weight
     2872.6 lb
  • M316 - Excavators

     -
    Operating Weight Maximum
     40560 lb
  • 2479mm (98in) - Forks
    Fork Width
     98 in
    Inside Height
     78 in
    Weight
     17458 lb
  • CG170-16 - Electric Power
    Fuel Type
     Natural Gas, Biogas, Coal Gas
    Frequency
     50 or 60 Hz
  • US440I

     -

    -
  • M 32 C - Marine Power Systems
    Power Range
     2880-4500 kW
    Speed Range
     600 rpm
    Emissions
     IMO II
  • 725C2 - Articulated Trucks
    Gross Power - SAE J1995
     320 HP
    Rated Payload
     26.5 ton (US)
    Heaped (SAE 2:1)
     19.6 yd³
  • 3516 (50 Hz) with Upgradeable Package - Electric Power
    Minimum Rating
     1600 kVA
    Maximum Rating
     2000 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption, Low Emissions
  • 53.5 m³ (70.0 yd³) - Blades
    Capacity
     70 yd³
    Width
     287 in
  • G213 GC Demolition & Sorting Grapple: 587-8655 - Grapples
    Capacity
     0.59 yd³
    Weight
     1508 lb
  • C15 (50 Hz) - Electric Power
    Minimum Rating
     365 kVA
    Maximum Rating
     550 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption, U.S. EPA Certified for Stationary Emergency Use Only (Tier 2 or Tier 3 Nonroad Equivalent Emission Standards), EU Stage IIIA Nonroad Emission Standards, China Nonroad III Emission Standards
  • MP318 Shear Jaw - Multi-Processors
    Length
     1897 in
    Height
     1298 in
    Width
     793 in
  • DG60-2 (Single Phase) - Electric Power
    Fuel System
     Natural Gas / LP Vapor
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • M 34 DF - Marine Power Systems
    Maximum Rating
     4574 kWe (5724 kVA)
    Minimum Rating
     2934 kWe (3672 kVA)
  • 406 mm (16 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     5.7 ft³
    Width
     16 in
    Weight
     337.3 lb
  • 1.03 m3 (1.35 yd3) Pin On, Bolt-On Teeth - Buckets - Backhoe Front
    Capacity
     1.29 yd³
    Width
     89.1 in
    Weight
     1873.9 lb
  • C7 - Industrial
    Maximum Power
     300 HP
    Rated Speed
     1800-2200 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     588 kg (1296 lb)
  • D4K2 Tier 4 Final/Stage IV - Dozers
    Power - Net
     92 HP
    Operating Weight - XL
     18007 lb
  • 5.0 m3 (6.5 yd3), Fusion™, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     6.5 yd³
    Width
     119.4 in
    Weight
     4909.7 lb
  • BR118 - Brushcutters
    Overall Width
     74 in
    Cutting Width
     72 in
    Maximum Cutting Diameter
     3 in
  • 500 mm (20 in) - Buckets - Excavator
    Capacity
     1.6 ft³
    Width
     19.7 in
    Weight
     90.2 lb
  • 3.4m³ (4.5yd³) - Buckets - Loader
    Capacity
     4.5 yd³
    Width
     106 in
    Weight
     2392 lb
  • 1000 mm (40 in) - Buckets - Excavator
    Capacity
     56.6 l
    Width
     39.4 in
    Weight
     93.7 lb
  • 1067 mm (42 in) - Forks
    Fork Tine Width
     5 in
    Fork Tine Thickness
     2 in
    Fork Tine Length
     42 in
  • 323 - Excavators
    Engine Power - ISO 9249
     172 HP
    Operating Weight
     56200 lb
  • 740 GC - Articulated Trucks
    Gross Power - SAE J1995
     452 HP
    Rated Payload
     40 ton (US)
    Heaped (SAE 2:1)
     29.7 yd³
  • 1200 mm (47 in) - Buckets - Excavator
    Rated Capacity
     14.5 yd³
    Width
     47.2 in
    Weight
     615.3 lb
  • CM32E - Electric Power
    Minimum Rating
     3085 kWe
    Maximum Rating
     4630 kWe
    Emissions/Fuel Strategy
     (WB) Cert stage 1 and 2
  • 834K Scoops for Coal & Woodchips - Dozers
    Net Power
     496 HP
    Operating Weight
     112838 lb
  • CVP40 - Compactors
    Impulse Force
     8992.36 lb

    -
    Base Plate Width
     23.2 in
  • BA25 Hydraulic - Brooms
    Overall Width
     106.3 in
    Sweeping Width
     98.4 in
    Brush Diameter
     27.6 in
  • 637K - Wheel Tractor-Scrapers
    Flywheel Power - Tractor/Scraper
     425 kW (570 hp)/216 kW (290 hp)
    Scraper Capacity - Heaped
     50 yd³
    Top Speed - Loaded
     34.7 mile/h
  • 4.2 m3 (5.5 yd3), Fusion™, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     5.5 yd³
    Width
     108.1 in
    Weight
     3172.4 lb
  • 1.9 m3 (2.5 yd3), Fusion™ Coupler, Bolt-On Teeth - Buckets - Compact Wheel Loader
    Rated Capacity
     2.5 yd³
    Width
     95.9 in
    Weight
     1618.2 lb
  • 7m³ (9.2yd³) Iron Ore - Buckets - Loader
    Capacity
     9.2 yd³
    Width
     175 in
    Weight
     18750 lb
  • DE50 GC (50 Hz) - Electric Power
    Minimum Rating
     50.0 kVA
    Maximum Rating
     50.0 kVA
    Emissions/Fuel Strategy
     Non Regulated
  • DG80-2 (3 Phase) - Electric Power
    Fuel System
     Natural Gas
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • UJ440E

     -

    -
  • 1.5 m3 (2.0 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     2 yd³
    Width
     81.9 in
    Weight
     1134.9 lb
  • T109 Manual Side Shift - Trenchers
    Overall Length
     92.4 in
    Overall Height
     30.9 in
    Overall Width
     56.1 in
  • 14.5m³ (19yd³) - Buckets - Loader
    Capacity
     19 yd³
    Width
     175 in
    Weight
     15400 lb
  • C2.2 (50 Hz) - Electric Power
    Minimum Rating
     13.0 kVA
    Maximum Rating
     22.0 kVA
    Emissions/Fuel Strategy
     EU Stage IIIA
  • 972M - Wheel Loaders
    Maximum Net Power - 1,700 rpm - SAE J1349
     299 HP
    Operating Weight
     54871 lb
    Bucket Capacities
     3.20-9.94 m³ (4.19-13.0 yd³)
  • 8.6m³ (11.25yd³) Performance Series - Buckets - Loader
    Capacity
     11.25 yd³
    Width
     182 in
    Weight
     26520 lb
  • 45.9 m³ (60.0 yd³) - Blades
    Capacity
     60 yd³
    Width
     215 in
  • C7.1 - Industrial
    Maximum Power
     275 HP
    Rated Speed
     116-205 bkW/156-275 bhp @ 2200 rpm, 129 bkW/173 bhp @ 2500 rpm
    Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     788 kg (1737 lbs)
  • RM300 - Road Reclaimers
    Gross Power
     350 HP
    Maximum Operating Weight
     53911 lb
    Cutting/Mixing Width
     96 in
  • MH3024 - Material Handlers
    Maximum Net Power - SAE J1349/ISO 9249
     126 kW (169 hp [171 hp/PS*])
    Operating Weight
     22 950-24 165 kg (50,596-53,242 lb)
    Maximum Reach
     33.92 ft
  • 3512 (50 Hz) with Upgradeable Package - Electric Power
    Minimum Rating
     1000 kVA
    Maximum Rating
     1400 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption, Low Emissions
  • 3.0 m3 (3.9 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     4 yd³
    Width
     108.1 in
    Weight
     2731.5 lb
  • C18 High Ambient Acoustic Enclosure - Generator Set Enclosures

     -

    -
  • 926M Ag Handler - Wheel Loaders
    Rated Net Power
     154 HP
    Operating Weight
     28647 lb
    Bucket Capacities
     2.1-4.2 m3 (2.7-5.5 yd3)
  • 434F2 - Backhoe Loaders
    Power - Net
     95 HP
    Operating Weight - Nominal
     20408 lb
    Operating Weight - Maximum
     25353 lb
  • GB124 - Blades

     -

    -
  • M 46 DF - Marine Power Systems
    Power Range
     5400 - 8685 kW
    Speed Range
     500 / 514 rpm
    Emissions
     IMO II in diesel mode / IMO III in gas mode
  • 19m³ (25yd³) - Buckets - Loader
    Capacity
     25 yd³
    Width
     245 in
    Weight
     47909 lb
  • AP600F - Asphalt Pavers
    Gross Power
     173 HP
    Operating Weight - Paver Only
     30522 lb
    Standard Paving Range - SE50 V, SE50 VT
     2.55 - 5.0 m (8' 4" - 16' 4")
  • 1812 mm (71 in), Fusion™ - Forks
    Carriage Width
     71.3 in
    Grapple Height
     102.6 in
    Grapple Weight
     3860.3 lb
  • 305 mm (12 in), Pin On - Buckets - Backhoe Rear
    Capacity
     2.3 ft³
    Width
     12 in
    Weight
     271.2 lb
  • 3.66 m (12 ft) - Snow Pushes
    Weight
     2786.6 lb
    Overall Height
     42.8 in
    Working Width
     144 in
  • 305 mm (12 in) - Augers
    Diameter
     12 in
    Weight
     101.4 lb
    Overall Length
     50.3 in
  • BU118 - Brooms
    Overall Width
     83.3 in
    Sweeping Width
     73.4 in
    Brush Diameter
     26 in
  • 299D2 - Compact Track and Multi Terrain Loaders
    Gross Power - SAE J1995
     98 HP
    Operating Weight
     11275 lb
  • 730 - Articulated Trucks
    Gross Power - SAE J1995
     375 HP
    Rated Payload
     31 ton (US)
    Heaped (SAE 2:1)
     23 yd³
  • 1220 mm (48 in) - Fork Accessories

     -

    -
  • 762 mm (30 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     9.9 ft³
    Width
     30 in
    Weight
     443.1 lb
  • 762 mm (30 in) - Buckets - Excavator
    Rated Capacity
     10.9 yd³
    Width
     30 in
    Weight
     491.6 lb
  • 1220 mm (48 in) - Fork Accessories

     -

    -
  • 2.5 m3 (3.3 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     3.3 yd³
    Width
     108.1 in
    Weight
     2581.6 lb
  • CG170-20 - Electric Power
    Fuel Type
     Natural Gas, Biogas, Coal Gas
    Frequency
     50 / 60 Hz
  • ENGINE

     -

    -
  • 2.9 m3 (3.8 yd3), Pin On - Buckets - Loader
    Capacity
     3.8 yd³
    Width
     107.4 in
    Weight
     2330.3 lb
  • CW34 - Compactors
    Gross Power
     133 HP
    Operating Weight - Standard Machine Empty
     22050 lb
    Compaction Width
     82 in
  • 2.9m³ (3.75yd³) - Buckets - Loader
    Capacity
     3.75 yd³
    Width
     106 in
    Weight
     2127 lb
  • 914 mm (36 in), Pin On - Buckets - Backhoe Rear
    Capacity
     10.3 ft³
    Width
     36 in
    Weight
     416.7 lb
  • C9.3 ACERT - Marine Power Systems
    Power Range
     375-476 bhp (280-355 bkW)
    Speed Range
     1800-2300 rpm
    Emissions
     EPA Tier 3 Commercial, IMO II, EU IW
  • 2.44 m (8 ft) - Snow Pushes
    Weight
     778.2 lb
    Overall Height
     36 in
    Working Width
     96 in
  • 2.5 m3 (3.3 yd3), Pin On - Buckets - Loader
    Capacity
     3.2 yd³
    Width
     99.5 in
    Weight
     2153.9 lb
  • 3608 - Industrial
    Maximum Power
     3300 HP
    Rated Speed
     800-1000 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     19,000 kg (41,800 lb)
  • 13m³ (17yd³) - Buckets - Loader
    Capacity
     17 yd³
    Width
     203 in
    Weight
     34004 lb
  • CW-40 - Couplers - Excavator
    Weight
     528 lb
    Width
     22 in
    Load Rating, Hoisting Hook
     11 ton (US)
  • 1370 mm (54 in) - Fork Accessories

     -

    -
  • CW16 11-Wheel - Compactors
    Gross Power
     100.5 HP
    Operating Weight - 11 Wheel Base Machine
     11685 lb
    11 Wheel Compaction Width with Bias Tire
     84 in
  • CG170-16 K - Electric Power
    Fuel Type
     Natural Gas, Biogas, Coal Gas
    Frequency
     50 or 60 Hz
  • G3512 750 ekW - Electric Power
    Fuel Type
     Natural Gas
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Non-Emergency Stationary Genset
  • S3090 Rotating Scrap & Demolition Shear - Shears
    Length
     211 in
    Height
     71 in
    Width
     51 in
  • 6.9 m³ (9.0 yd³) - Blades
    Capacity
     9 yd³
    Width
     168 in
  • 740 EJ - Articulated Trucks
    Gross Power - SAE J1995
     511 HP
    Rated Payload
     42 ton (US)
    Heaped (SAE 2:1)
     30.1 yd³
  • MP324 Shear Jaw - Multi-Processors
    Length
     2082 in
    Height
     1419 in
    Width
     793 in
  • CW-05 - Couplers - Excavator
    Weight
     55 lb
    Width
     7 in
    Load Rating, Hoisting Hook
     2.2 ton (US)
  • 639 mm (25 in) - Rippers
    Overall Length
     32.8 in
    Weight
     240.3 lb
    Width
     16.5 in
  • 316F L - Excavators
    Gross Power - SAE J1995
     91 kW (122 hp/123 PS)
    Operating Weight
     39029 lb
  • 1500 mm (59 in), Pin On - Buckets - Backhoe Rear
    Capacity
     18.6 ft³
    Width
     59.1 in
    Weight
     743 lb
  • GSV525 5-Tine, 1150-Liter Orange Peel Grapple - Grapples
    Capacity
     1.5 yd³
    Operating Weight
     NAN lb
  • QI341/HS

     -

    -
  • HM115C - Mulchers
    Overall Width
     69.2 in
    Weight
     1803.4 lb
    Required Hydraulics
     Standard Flow
  • 16.4 m³ (21.5 yd³) - Blades
    Capacity
     21.5 yd³
    Width
     192 in
  • 3.4m³ (4.5yd³) - Buckets - Loader
    Capacity
     4.5 yd³
    Width
     106 in
    Weight
     2628 lb
  • BLADES

     -

    -
  • 966M - Wheel Loaders
    Net Power - ISO 9249
     278 HP
    Operating Weight
     51176 lb
    Bucket Capacities
     3.20-7.40 m³ (4.19-9.68 yd³)
  • 6.4m³ (8.3yd³) Serrated Edge - Buckets - Loader
    Capacity
     8.3 yd³
    Width
     156 in
    Weight
     12026 lb
  • 0.9 m3 (1.2 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     1.2 yd³
    Width
     74.4 in
    Weight
     870.4 lb
  • BP118C - Brooms
    Overall Width
     90.4 in
    Sweeping Width
     72 in
    Brush Diameter
     26 in
  • UJ440i

     -

    -
  • 980 2-wedge - Couplers - Loader
    Width
     56.8 in
    Height
     33.1 in
    Weight
     2199 lb
  • C27 and C32 Sound Attenuated Enclosure - Generator Set Enclosures

     -

    -
  • Material Handling Arm - Material Handling
    Maximum Load Rating
     1999.6 lb
    Retracted Length
     40 in
  • C9.3B - Industrial
    Maximum Power
     456 HP
    Rated Speed
     1800-2200 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     865 kg (1907 lb)
  • G3508/G3508B - Industrial
    Maximum Power
     690 HP

    -
    Weight - Net Dry
     3941 kg (8688 lb)
  • MP345 Shear Jaw - Multi-Processors
    Length
     2296 in
    Height
     1865 in
    Width
     1005 in
  • R1600H - Underground - Hard Rock
    Gross Power - SAE J1995
     279 HP
    Loaded
     88956 lb
    Nominal Payload Capacity
     22487 lb
  • 15.3 m³ (20.0 yd³) - Blades
    Capacity
     20 yd³
    Width
     168 in
  • HF201B - Felling Heads

     -

    -
  • CG132B-16 - Electric Power
    Fuel Type
     Natural Gas
    Frequency
     50 Hz
  • 1500 mm (59 in) - Buckets - Excavator
    Rated Capacity
     11.65 yd³
    Width
     59.1 in
    Weight
     491.4 lb
  • 773G - Off-Highway Trucks
    Gross Power - SAE J1995
     775 HP
    Nominal Payload Class (100%)
     61.7 ton (US)
    Top Speed - Loaded
     42 mile/h
  • PM310 Wheel Undercarriage - Cold Planers
    Rated Power
     336.6 HP
    Operating Weight
     46473 lb
    Milling Width
     39.4 in
  • C280-8 - Marine Power Systems
    Power Range
     3084-3393 bhp (2300-2530 bkW)
    Speed Range
     900 rpm
    Emissions
     IMO II
  • 1600 mm (63 in) - Buckets - Excavator
    Rated Capacity
     9.9 yd³
    Width
     63 in
    Weight
     552.3 lb
  • 963K - Track Loaders
    Net Power - ISO 9249/SAE J1349
     193 HP
    Operating Weight
     44138 lb
    Capacity - General Purpose
     3.2 yd³
  • DE33 GC (60 Hz) - Electric Power
    Minimum Rating
     30.0 ekW
    Maximum Rating
     30.0 ekW
    Emissions/Fuel Strategy
     Non Regulated
  • 2.3m³ (3yd³) - Buckets - Loader
    Capacity
     3 yd³
    Width
     106 in
    Weight
     3582 lb
  • CS78B - Compactors
    Gross Power
     173.7 HP
    Operating Weight - With Cab
     41214 lb
    Compaction Width
     84 in
  • C2.8 - Industrial
    Maximum Power
     74 HP
    Rated Speed
     2200-2400 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     320 kg (705 lb)
  • M 32 E - Marine Power Systems
    Power Range
     3300 - 4950 kW
    Speed Range
     720-750 rpm
    Emissions
     IMO II / IMO III with SCR
  • 1829 mm (72 in) Extension - Auger Accessories

     -

    -
  • UD440E

     -

    -
  • 2.7 m3 (3.5 yd3), Fusion™ Coupler - Buckets - Loader
    Capacity
     3.5 yd³
    Width
     107.4 in
    Weight
     2220.1 lb
  • 31.3m³ (41yd³) - Buckets - Loader
    Capacity
     41 yd³
    Width
     245 in
    Weight
     48864 lb
  • 3616 - Industrial
    Maximum Power
     6598 HP
    Rated Speed
     800-1000 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     29,950 kg (65,900 lb)
  • 610 mm (24 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     7.3 ft³
    Width
     24 in
    Weight
     370.4 lb
  • DG250 GC (3 phase) - Electric Power
    Fuel System
     Carbureter, Down Draft
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • QS332 DDHS

     -

    -
  • SEAL KITS

     -

    -
  • AP500F - Asphalt Pavers
    Gross Power
     142 HP
    Operating Weight - Paver Only
     29020 lb
    Standard Paving Range - SE50 V, SE50 VT
     2.55 - 5.0 m (8' 4" - 16' 4")
  • CVP110 - Compactors
    Impulse Force
     24669 lb
    Cycles/Minimum
     2200
    Base Plate Width
     34 in
  • CW-10 - Couplers - Excavator
    Weight
     143 lb
    Width
     12.4 in
    Load Rating, Hoisting Hook
     4.4 ton (US)
  • UH440i

     -

    -
  • 2080 mm (82 in), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Height - Grapples Closed
     41.5 in
    Width
     81.9 in
    Weight
     1295 lb
  • 2700mm (106in), Fusion™ - Buckets - Loader

     -
    Width
     106 in
    Weight
     2474 lb
  • 2188 mm (86 in), Bolt-On Teeth - Buckets - Skid Steer Loader
    Capacity
     0.82 yd³
    Width
     86.1 in
    Weight
     670.2 lb
  • G3520E - Electric Power
    Fuel Type
     Natural Gas
    Frequency
     50 / 60 Hz
  • 2337 mm (92 in), SMART - Blades
    Overall Width
     92 in
    Length
     40.5 in
  • 950 GC - Wheel Loaders
    Maximum Net Power - 1,700 rpm - ISO 9249
     225 HP
    Operating Weight
     41554 lb
    Bucket Capacities
     2.9-4.4 m³ (3.75-5.75 yd³)
  • 308 CR VAB - Excavators
    Gross Power - ISO 14396
     74.3 HP
    Operating Weight
     20906 lb
  • 3.6m³ (4.75yd³) Performance Series - Buckets - Loader
    Capacity
     4.75 yd³
    Width
     128 in
    Weight
     4859 lb
  • 1169 mm (46 in) - Fork Accessories

     -

    -
  • 2.7 m3 (3.5 yd3), Pin On - Buckets - Loader
    Capacity
     3.5 yd³
    Width
     107.4 in
    Weight
     2250.9 lb
  • 0.8 m3 (1.0 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     1 yd³
    Width
     74.4 in
    Weight
     1177 lb
  • 305 mm (12 in), Pin On - Buckets - Backhoe Rear
    Capacity
     2.8 ft³
    Width
     12 in
    Weight
     238.1 lb
  • 762 mm (30 in) - Buckets - Excavator
    Rated Capacity
     6.1 yd³
    Width
     30 in
    Weight
     280 lb
  • 1576 mm (62 in) w/Spill Guard, Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.39 yd³
    Width
     62 in
    Weight
     851 lb
  • 1.1 m3 (1.4 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     1.4 yd³
    Width
     81.9 in
    Weight
     980 lb
  • 1.1 m3 (1.4 yd3) Pin On - Buckets - Backhoe Front
    Capacity
     1.4 yd³
    Width
     95.5 in
    Weight
     1655 lb
  • DG350 GC (3 phase) - Electric Power
    Fuel Type
     Natural Gas
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • 2007 mm (79 in) - Blades
    Overall Width
     79 in
    Length
     40.5 in
  • 3512B (50 Hz) with Upgradeable Package - Electric Power
    Minimum Rating
     1320 kVA
    Maximum Rating
     1750 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption, Low Emissions
  • 1.3 m3 (1.7 yd3), IT Coupler, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
     1.9 yd³
    Width
     94.5 in
    Weight
     1220.9 lb
  • 28m³ (36.6yd³) Heavy Rock - Buckets - Mining Shovels

     -

    -
  • 775G - Off-Highway Trucks
    Gross Power - SAE J1995
     825 HP
    Nominal Payload Class (100%)
     71.3 ton (US)
    Top Speed - Loaded
     42 mile/h
  • Hex To Round Adapter - Auger Accessories

     -

    -
  • 3516B (50 Hz) with Upgradeable Package - Electric Power
    Minimum Rating
     1750 kVA
    Maximum Rating
     2250 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption, Low Emissions
  • G324 WH Demolition & Sorting Grapple: 587-8986 - Grapples
    Capacity
     2.35 yd³
    Weight
     4639 lb
  • 1.14 m3 (1.5 yd3), IT Coupler - Buckets - Backhoe Front
    Capacity
     1.5 yd³
    Width
     94.7 in
    Weight
     2270.8 lb
  • 1.5 m3 (2.0 yd3), Pin On, Bolt-On Teeth - Buckets - Compact Wheel Loader
    Rated Capacity
     2.2 yd³
    Width
     95.6 in
    Weight
     1270.1 lb
  • 1.1 m3 (1.4 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     1.4 yd³
    Width
     81.9 in
    Weight
     979.1 lb
  • MP365 Concrete Cutter Jaw - Multi-Processors
    Length
     104.8 in
    Height
     2534 mm
    Width
     3.9 in
  • 1883 mm (74 in) - Buckets - Skid Steer Loader
    Capacity
     0.63 yd³
    Width
     74.1 in
    Weight
     842.2 lb
  • H160 S - Hammers
    Impact Energy Class
     8500 ft·lbf
    Blows per Minute
     400-505
    Maximum Operating Weight
     7784 lb
  • T109 Manual Side Shift - Trenchers
    Overall Length
     92.4 in
    Overall Height
     30.9 in
    Overall Width
     56.1 in
  • C8.7 - Marine Power Systems
    Power Range
     641 BHP
    Speed Range
     2300 rpm
    Emissions
     EPA Tier 3 Recreational & Commercial, IMO II, EU Stage IIIA (EU IW)
  • T112 Hydraulic Side Shift - Trenchers
    Overall Length
     106.5 in
    Overall Height
     30.9 in
    Overall Width
     74.8 in
  • 1.6 m3 (2.1 yd3), IT Coupler, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
     2.2 yd³
    Width
     94.5 in
    Weight
     1362 lb
  • C0.5 - Industrial
    Maximum Power
     13.7 HP
    Rated Speed
     2800-3600 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     57 kg (126 lb)
  • Pin Grabber Coupler (CB-Linkage): 455-3911 - Couplers - Excavator
    Weight
     1025 lb
    Width - Machine Interface
     21.6 in
    Lifting Eye Working Load Limit
     30865 ton (US)
  • 311F L RR - Excavators
    Gross Power - SAE J1995
     74 HP
    Operating Weight
     28660 lb
  • 800 mm (32 in) - Buckets - Excavator
    Capacity
     79.3 l
    Width
     31.5 in
    Weight
     179.5 lb
  • 457 mm (18 in) Pin On - Buckets - Backhoe Rear
    Capacity
     6.4 ft³
    Width
     18 in
    Weight
     335.1 lb
  • 1370 mm (54 in) - Fork Accessories

     -

    -
  • H110 GC S - Hammers
    Impact Energy Class
     1475 ft·lbf
    Blows per Minute
     450-650
    Maximum Operating Weight
     2776 lb
  • 907M - Wheel Loaders
    Net Power
     74 HP
    Operating Weight
     12677 lb
    Bucket Capacities
     0.75-1.5 m3 (1.0-2.0 yd3)
  • HYDRAULIC AND TRANSMISSION FILTERS

     -

    -
  • PC404 - Cold Planers
    Working Width
     17.7 in
    Maximum Cutting Depth
     4.9 in
    Required Hydraulics
     Standard Flow
  • 1312 mm (52 in) - Fork Accessories

     -

    -
  • DE220 GC - Electric Power
    Minimum Rating
     217 kVA
    Maximum Rating
     217 kVA
    Emissions/Fuel Strategy
     Non Regulated
  • 980 3-Wedge - Couplers - Loader
    Width
     65.9 in
    Height
     34.4 in
    Weight
     2752 lb
  • C7.1 - Industrial
    Maximum Power
     275 HP
    Rated Speed
     1800-2200 rpm
    Weight - Approximate, Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     1000 kg (2204 lb)
  • PM825 - Cold Planers
    Rated Power
     800.6 HP
    Operating Weight
     82673 lb
    Milling Width
     98.6 in
  • CW-45 - Couplers - Excavator
    Weight
     946 lb
    Width
     27.6 in
    Load Rating, Hoisting Hook
     15.4 ton (US)
  • 4.2 m3 (5.5 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     5.5 yd³
    Width
     108.1 in
    Weight
     3174.7 lb
  • CTS Series Automatic Transfer Switch - Electric Power
    Rating Range
     40 to 4000A
    Transfer Type
     Open transition
    Switch Type
     Contactor Based
  • QJ341/+

     -

    -
  • 3512 - Industrial
    Maximum Power
     1600 HP
    Rated Speed
     1460-1750 rpm
    Weight - Approximate, Net Dry (Basic Operating Engine Without Optional Attachments)
     6350 kg (13999 lb)
  • VM 32 C - Marine Power Systems
    Maximum Rating
     7672 kWe (9600 kVA)
    Minimum Rating
     5754 kWe (7200 kVA)
  • DG200 GC (3 phase) - Electric Power
    Fuel System
     Carburetor, Down Draft
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • SG16 - Stump Grinders
    Overall Length
     68.4 in
    Overall Height
     28.7 in
    Overall Width
     46.3 in
  • D6 XE - Dozers
    Power - Net
     215 HP
    Operating Weight
     51333 lb
  • QA441/e

     -

    -
  • 1.0 m3 (1.3 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Backhoe Front
    Capacity
     1.26 yd³
    Width
     89.1 in
    Weight
     1021 lb
  • C3.6 - Industrial
    Maximum Power
     134 HP
    Rated Speed
     2000-2400 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     840 lb
  • FUEL FILTERS

     -

    -
  • T109 Manual Side Shift - Trenchers
    Overall Length
     92.4 in
    Overall Height
     30.9 in
    Overall Width
     56.1 in
  • 2036 mm (80 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.98 yd³
    Width
     80.2 in
    Weight
     705.5 lb
  • 36.70 m³ (48.0 yd³) - Blades
    Capacity
     48 yd³
    Width
     226 in
  • C18 ACERT Tier 3 - Marine Power Systems
    Power Range
     469-1001 bhp (350-747 bkW)
    Speed Range
     1800-2300 rpm
    Emissions
     EPA Tier 3 Commercial, IMO II, EU IW
  • 457 mm (36 in) - Augers
    Diameter
     914/457 mm (36/18 in)
    Weight
     308.6 lb
    Overall Length
     50.7 in
  • 1.9 m3 (2.5 yd3), ISO Coupler, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
     2.6 yd³
    Width
     94.5 in
    Weight
     1470 lb
  • C4.4 - Industrial
    Maximum Power
     173.5 HP
    Rated Speed
     2200 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     400-420 kg (881.8-926 lb)
  • A23 - Augers
    Drive Shaft Torque at Maximum Pressure
     1699.3 lb/ft
    Drive Method
     Gerotor Motor - Direct Drive
    Mounting Bracket Design
     Mini Excavator
  • 1226 mm (48 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     27 ft³
    Width
     48.3 in
    Weight
     1053.8 lb
  • DIN BATTERIES

     -

    -
  • 1.2 m3 (1.6 yd3), ISO Coupler, Bolt-On Teeth - Buckets - Compact Wheel Loader
    Rated Capacity
     1.9 yd³
    Width
     95.6 in
    Weight
     1168.9 lb
  • MP324 Universal Jaw - Multi-Processors
    Length
     86.1 in
    Height
     57.6 in
    Width
     31.2 in
  • AP255E - Asphalt Pavers
    Gross Power
     46 HP
    Operating Weight - With Screed
     9921 lb
  • 3516B - Industrial
    Maximum Power
     2200 HP
    Rated Speed
     1800 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     7484 kg (16,500 lb)
  • 1495mm (59in) Ripper - Rippers
    Overall Length
     77.9 in
    Weight
     3391 lb
    Width
     32 in
  • HM210 - Mulchers
    Overall Width
     48.3 in
    Weight
     1190.5 lb
    Required Hydraulics
     Standard Flow
  • 3.66 m (12 ft) - Snow Pushes
    Weight
     1402.1 lb
    Overall Height
     39.1 in
    Working Width
     144 in
  • 962M - Wheel Loaders
    Maximum Net Power - 2,100 rpm - ISO 9249
     250 HP
    Operating Weight
     44591 lb
    Bucket Capacities
     2.5-9.2 m³ (3.3-12.0 yd³)
  • 1.8 m3 (2.4 yd3), Weld-On Teeth - Buckets - Compact Wheel Loader
    Rated Capacity
     1.9 yd³
    Width
     95.8 in
    Weight
     1490.1 lb
  • C7.1 - Industrial
    Maximum Power
     275 HP
    Rated Speed
     2200-2500 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     524 kg (1155 lb)
  • 1730 mm (68 in) w/Spill Guard, Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.44 yd³
    Width
     68.1 in
    Weight
     906.1 lb
  • 3.05 m (10 ft) - Snow Pushes
    Weight
     866.4 lb
    Overall Height
     36 in
    Working Width
     120 in
  • MX250 Microprocessor Controller - Electric Power
    Rating Range
     Switch Dependent
    Transfer Type
     Application Dependent
    Switch Type
     Application Dependent
  • 1070 mm (42 in) - Forks
    Fork Tine Width
     4 in
    Fork Tine Thickness
     1.77 in
    Fork Tine Length
     42 in
  • 1.34 m3 (1.75 yd3), Pin On - Buckets - Backhoe Front
    Capacity
     1.75 yd³
    Width
     95.8 in
    Weight
     1240 lb
  • 1.3 m3 (1.7 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     1.7 yd³
    Width
     81.9 in
    Weight
     1018.8 lb
  • 914 mm (36 in) - Buckets - Excavator
    Rated Capacity
     7.1 yd³
    Width
     36 in
    Weight
     293.2 lb
  • 1374mm (54in) Ripper - Rippers
    Overall Length
     73.3 in
    Weight
     2473 lb
    Width
     32 in
  • 2198 mm (87 in) - Blades
    Overall Width
     86.5 in
    Weight
     729.7 lb
  • C32 ACERT IMO II - Marine Power Systems
    Power Range
     660-1450 bhp (492-1081 bkW)
    Speed Range
     1600-2300 rpm
    Emissions
     IMO II, EU IW
  • 279D3 - Skid Steer Loaders
    Gross Power - SAE J1995
     74.3 HP
    Operating Weight
     10095 lb
  • ATC Contactor-Based Automatic Transfer Switch - Electric Power
    Rating Range
     40-1600A
    Transfer Type
     Open / Closed Transition
    Switch Type
     Contactor Based
  • 2.3 m3 (3.0 yd3), Fusion™ Coupler - Buckets - Loader
    Capacity
     3 yd³
    Width
     100 in
    Weight
     1902.6 lb
  • 15m³ (19.5yd³) - Buckets - Loader
    Capacity
     19.5 yd³
    Width
     222 in
    Weight
     42465 lb
  • 3.66 m (12 ft) - Snow Pushes
    Weight
     4523.9 lb
    Overall Height
     38.4 in
    Working Width
     144 in
  • 457 mm (18 in) - Augers
    Diameter
     18 in
    Weight
     143.3 lb
    Overall Length
     50.3 in
  • G318 Demolition & Sorting Grapple: 587-8966 - Grapples
    Capacity
     1.11 yd³
    Weight - Including Bracket
     4664 lb
  • BR117 - Brushcutters
    Overall Width
     68 in
    Cutting Width
     66 in
    Maximum Cutting Diameter
     3 in
  • SW360B, 76 mm (3 in) - Saws
    Length
     93 in
    Overall Height
     70 in
    Overall Width
     73 in
  • 0.95 m3 (1.25 yd3), IT Coupler, Bolt-On Cutting Edge - Buckets - Backhoe Front
    Capacity
     1.26 yd³
    Width
     89.1 in
    Weight
     1110.9 lb
  • H115 S - Hammers
    Impact Energy Class
     3000 ft·lbf
    Blows per Minute
     370-800
    Maximum Operating Weight
     3219 lb
  • 0.9 m3 (1.2 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     1.2 yd³
    Width
     81.9 in
    Weight
     1283.1 lb
  • 777E - Off-Highway Trucks
    Gross Power - SAE J1995
     1016 HP
    Nominal Payload Class (100%)
     102 ton (US)
    Top Speed - Loaded
     40.9 mile/h
  • 725C2 Bare Chassis - Articulated Trucks
    Gross Power - SAE J1995
     320 HP
    Rated Payload
     26 t
  • 963K WH - Track Loaders
    Net Power - Rated - ISO 9249/SAE J1349
     193 HP
    Operating Weight
     44802 lb
    Capacity - General Purpose Landfill
     4.1 yd³
  • CW-20 - Couplers - Excavator
    Weight
     418 lb
    Width
     22 in
    Load Rating, Hoisting Hook
     11 ton (US)
  • C3.6 - Industrial
    Maximum Power
     121 HP
    Rated Speed
     2200-2400 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     381 kg (840 lb)
  • C175-16 (50 Hz) - Electric Power
    Minimum Rating
     2500 kVA
    Maximum Rating
     3100 kVA
    Emissions/Fuel Strategy
     Low Fuel, Low Emissions
  • 762 mm (30 in) - Buckets - Excavator
    Rated Capacity
     5.6 yd³
    Width
     30 in
    Weight
     257.9 lb
  • 4.87 m (16 ft) - Snow Pushes
    Weight
     3421.6 lb
    Overall Height
     44.4 in
    Working Width
     192 in
  • ATC Power Breaker & Case Switch Automatic Transfer Switch - Electric Power
    Rating Range
     200 to 5000A
    Transfer Type
     Open Transition
    Switch Type
     Power Breaker
  • PM622 - Cold Planers
    Rated Power
     630 HP
    Operating Weight
     74737 lb
    Milling Width
     88 in
  • 10.4m (13.6)yd Coal - Buckets - Mining Shovels

     -

    -
  • 3.6m³ (4.75yd³) - Buckets - Loader
    Capacity
     4.75 yd³
    Width
     120 in
    Weight
     9695 lb
  • A23 - Augers
    Drive Shaft Torque at Maximum Pressure
     1699.3 lb/ft
    Drive Method
     Gerotor Motor - Direct Drive
    Mounting Bracket Design
     Mini Excavator
  • Pin Grabber Coupler (TB-Linkage): 455-3907 - Couplers - Excavator
    Weight
     2082 lb
    Width - Machine Interface
     26.2 in
    Lifting Eye Working Load Limit
     44092 ton (US)
  • G3516C - Electric Power
    Fuel Type
     Natural Gas
    Frequency
     50 / 60 Hz
  • 3.0 m3 (3.9 yd3), Fusion™, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     4 yd³
    Width
     108.1 in
    Weight
     2689.6 lb
  • 6.4m³ (8.3yd³) Performance Series - Buckets - Loader
    Capacity - Adapters
     8.3 yd³
    Width
     161 in
    Weight
     13966 lb
  • 1220 mm (48 in) - Fork Accessories

     -

    -
  • 1.0 m3 (1.3 yd3) Pin On, Bolt-On Cutting Edge - Buckets - Backhoe Front
    Capacity
     1.29 yd³
    Width
     89.1 in
    Weight
     1718.9 lb
  • 6.9m³ (9yd³) Performance Series - Buckets - Loader
    Capacity
     9 yd³
    Width
     158 in
    Weight
     11235 lb
  • 352F - Excavators
    Engine Power - ISO 9249
     417 HP
    Operating Weight
     112200 lb
  • HM315C - Mulchers
    Overall Width
     74.1 in
    Weight
     2958.6 lb
    Required Hydraulics
     High Flow XPS
  • 1.1 m3 (1.4 yd3) Pin On, Bolt-On Teeth - Buckets - Backhoe Front
    Capacity
     1.4 yd³
    Width
     95.5 in
    Weight
     1944 lb
  • 2419mm (96in) - Forks
    Fork Width
     96 in
    Inside Height
     58 in
    Weight
     5160 lb
  • 1 m3 (1.3 yd3) - Buckets - Telehandler
    Rated Bucket Capacity
     1.3 yd³
    Width
     95 in
    Bucket Weight
     1007 lb
  • D4 - Dozers
    Power - Net
     130 HP
    Operating Weight
     29258 lb
  • G3412 - Electric Power
    Fuel Type
     Natural Gas, Biogas, Field Gas, Propane
    Frequency
     50 or 60 Hz
  • 3.6m³ (4.75yd³) - Buckets - Loader
    Capacity - Adapters
     4.75 yd³
    Width
     128 in
    Weight
     5436 lb
  • C13 - Industrial
    Maximum Power
     520 HP
    Rated Speed
     1800-2100 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     908.4 kg (2002.7 lb)
  • 305 mm (12 in) Extension - Auger Accessories

     -

    -
  • 13m³ (17yd³) - Buckets - Loader
    Capacity
     17 yd³
    Width
     162 in
    Weight
     14186 lb
  • 980 2-wedge - Couplers - Loader
    Width
     56.8 in
    Height
     33.1 in
    Weight
     2205 lb
  • MP332 Demolition Jaw - Multi-Processors
    Length
     89 in
    Height
     79 in
    Width
     40 in
  • 836K - Compactors
    Gross Power
     562 HP
    Operating Weight
     123319 lb
  • 914M - Wheel Loaders
    Net Power
     97 HP
    Operating Weight
     19315 lb
    Bucket Capacities
     1.3-1.9 m3 (1.7-2.5 yd3)
  • A11 Long Stick - Augers
    Drive Shaft Torque at Maximum Pressure
     815 lb/ft
    Drive Method
     Gerotor Motor - Direct Drive
    Mounting Bracket Design
     Mini Excavator
  • 1524 mm (60 in) - Fork Accessories

     -

    -
  • 3.5 m3 (4.6 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     4.6 yd³
    Width
     106.9 in
    Weight
     4027.8 lb
  • S3035 Rotating Scrap & Demolition Shear - Shears
    Length
     137 in
    Height
     49.6 in
    Width
     29.5 in
  • 3.1m³ (4yd³) - Buckets - Loader
    Capacity
     4 yd³
    Width
     106 in
    Weight
     2194 lb
  • 310 - Excavators
    Gross Power - ISO 14396
     74.3 HP
    Operating Weight
     22447 lb
  • 2188 mm (86 in) w/Spill Guard, Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.56 yd³
    Width
     86.1 in
    Weight
     1071.4 lb
  • C7.1 - Marine Power Systems
    Maximum Rating
     200 ekW (250 kVA)
    Minimum Rating
     100 ekW (125 kVA)
    Frequency
     50 Hz or 60 Hz
  • 2137 mm (84 in) - Rakes
    Width
     84 in
    Weight
     1115.1 lb
    Jaw Opening
     37 in
  • 1421 mm (56 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.39 yd³
    Width
     55.9 in
    Weight
     392.4 lb
  • 260 mm (10 in) - Buckets - Excavator
    Capacity
     1.2 ft³
    Width
     10.2 in
    Weight
     112.2 lb
  • C1.5 - Industrial
    Maximum Power
     40.2 HP
    Rated Speed
     2200-3000 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     149-156.5 kg (328.5-345 lb)
  • 816K - Compactors
    Gross Power
     284 HP
    Operating Weight
     56899 lb
  • 986K - Wheel Loaders
    Net Power
     373 HP
    Operating Weight
     98806 lb
    Bucket Capacities
     5-10,3 m³ (6,5-13,5 yd.³)
  • S2050 Straight Scrap & Demolition Shear - Shears
    Length
     140 in
    Height
     60 in
    Width
     25 in
  • 2.9m³ (3.75yd³) - Buckets - Loader
    Capacity
     3.75 yd³
    Width
     117 in
    Weight
     4026 lb
  • BP115C - Brooms
    Overall Width
     78.3 in
    Sweeping Width
     60 in
    Brush Diameter
     26 in
  • R3000H - Underground - Hard Rock
    Gross Power - SAE J1995
     409 HP
    Loaded
     172540 lb
    Nominal Payload Capacity
     44092 lb
  • G324 Demolition & Sorting Grapple: 587-8977 - Grapples
    Capacity
     0.98 yd³
    Weight
     3940 lb
  • T109 Hydraulic Side Shift - Trenchers
    Overall Length
     92.4 in
    Overall Height
     30.9 in
    Overall Width
     56.1 in
  • A68 - Augers
    Drive Shaft Torque at Maximum Pressure
     5034.6 lb/ft
    Drive Method
     Gear Motor - Double Planetary Reduction
    Mounting Bracket Design
     Mini Excavator
  • SE60 VT XW Tamper Bar Screed - Asphalt Pavers
    Standard Weight
     9898 lb
    Standard Paving Range
     3.0 m - 6.0 m (10' - 19' 6")
  • 300 mm (12 in) - Buckets - Excavator
    Capacity
     0.8 ft³
    Width
     11.8 in
    Weight
     68.6 lb
  • G217 GC Demolition & Sorting Grapple: 587-8658 - Grapples
    Capacity
     0.78 yd³
    Weight
     1989 lb
  • 305 mm (12 in) - Buckets - Excavator
    Rated Capacity
     2.9 yd³
    Width
     12 in
    Weight
     185.2 lb
  • 3.2 m3 (4.2 yd3), Fusion™, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     4.2 yd³
    Width
     108.1 in
    Weight
     2788.8 lb
  • 19m³ (25yd³) - Buckets - Loader
    Capacity
     25 yd³
    Width
     222 in
    Weight
     46821 lb
  • 1.1 m3 (1.4 yd3) Pin On - Buckets - Backhoe Front
    Capacity
     1.4 yd³
    Width
     95.5 in
    Weight
     2002.9 lb
  • M 20 C - Marine Power Systems
    Maximum Rating
     1726 kWe (2160 kVA)
    Minimum Rating
     979 kWe (1224 kVA)
  • 1.0 m3 (1.3 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     1.3 yd³
    Width
     80.5 in
    Weight
     908.1 lb
  • C4.4 - Industrial
    Maximum Power
     129.4 HP
    Rated Speed
     2200 rpm
    Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     520 kg (1146 lb)
  • C4.4 - Industrial
    Maximum Power
     173.5 HP
    Rated Speed
     2200 rpm
    Weight - Approximate, Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     670-700 kg (1477-1543 lb)
  • CP44B - Compactors
    Gross Power
     100.6 HP
    Operating Weight - With Cab
     16471 lb
    Compaction Width
     66 in
  • 1730 mm (68 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Width
     68.1 in
    Height - Grapples Closed
     20.7 in
    Jaw Opening
     40 in
  • 11.5m³ (15yd³) - Buckets - Loader
    Capacity
     15 yd³
    Width
     192 in
    Weight
     21552 lb
  • GSV520 GC 5-Tine, 750-Liter Orange Peel Grapple - Grapples
    Capacity
     1 yd³
    Operating Weight
     NAN lb
  • 326F L/326F LN (2017) - Excavators

     -
    Operating Weight
     59325 lb
  • 140 GC / 140 GC AWD - Motor Graders

     -

    -
    Blade Width
     12 ft
  • 13m³ (17yd³) - Buckets - Loader
    Capacity
     17 yd³
    Width
     200 in
    Weight
     29435 lb
  • 772G - Off-Highway Trucks
    Gross Power - SAE J1995
     605 HP
    Nominal Payload Class (100%)
     51.6 ton (US)
    Top Speed - Loaded
     49.2 mile/h
  • 2188 mm (86 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.82 yd³
    Width
     86.1 in
    Weight
     723.1 lb
  • 914 mm (36 in) Extension - Auger Accessories

     -

    -
  • C13 (50 Hz) - Electric Power
    Minimum Rating
     350 kVA
    Maximum Rating
     450 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption, EU Stage IIIA Nonroad Emission Standards
  • 229 mm (9 in) - Augers
    Diameter
     9 in
    Weight
     75 lb
    Overall Length
     48.7 in
  • DG80-2 (Single Phase) - Electric Power
    Fuel System
     Natural Gas
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • 4.26 m (14 ft) - Snow Pushes
    Weight
     3176.9 lb
    Overall Height
     44.4 in
    Working Width
     168 in
  • DE200 GC (60 Hz) - Electric Power
    Minimum Rating
     175 ekW
    Maximum Rating
     175 ekW
    Emissions/Fuel Strategy
     Non Regulated
  • 914 - Wheel Loaders
    Rated Net Power - ISO 9249
     98 HP
    Operating Weight
     19103 lb
    Bucket Capacities
     1.3-1.9 m3 (1.7-2.5 yd3)
  • 990K - Wheel Loaders
    Net Power
     699 HP
    Operating Weight
     178517 lb
    Bucket Capacities
     7,4-14,9 m³ (9,7-19,5 yd³)
  • C7.1 - Marine Power Systems
    Power Range
     298 bkW - 373 bkW (400 bhp - 500 bhp)
    Speed Range
     2900 rpm
    Emissions
     EPA Tier 3 Recreational, IMO II, RCD 2016
  • C18 Tier 3 - Marine Power Systems
    Maximum Rating
     803 BHP
    Minimum Rating
     624 BHP
    Aspiration
     TA, TTA
  • 2.0 m3 (2.6 yd3), Fusion™ Coupler, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
     2.6 yd³
    Width
     94.5 in
    Weight
     1618.2 lb
  • XG400 - Electric Power
    Frequency
     60Hz
    Rating
     135 ekW (170 kVA) Continuous
  • 8.6m³ (11.25yd³) Performance Series - Buckets - Loader
    Capacity
     11.25 yd³
    Width
     182 in
    Weight
     15977 lb
  • CM43C V-Type - Electric Power
    Minimum Rating
     11170 kWe
    Maximum Rating
     14890 kWe
    Emissions/Fuel Strategy
     (WB) Cert stage 1 and 2
  • C15 High Ambient Acoustic Enclosure - Generator Set Enclosures

     -

    -
  • BA30 Manual - Brooms
    Overall Width
     126 in
    Sweeping Width
     118.1 in
    Brush Diameter
     36 in
  • CB1.8 - Compactors
    Gross Power
     24.7 HP
    Operating Weight
     3825 lb
    Standard Compaction Width
     39 in
  • 1270 mm (50 in) - Fork Accessories

     -

    -
  • M 25 C - Marine Power Systems
    Maximum Rating
     2877 kWe (3600 kVA)
    Minimum Rating
     1669 kWe (2088 kVA)
  • 1000 mm (39 in) - Buckets - Excavator
    Rated Capacity
     6.11 yd³
    Width
     39.4 in
    Weight
     181.4 lb
  • CB2.5 - Compactors
    Gross Power
     30.7 HP
    Operating Weight
     4960 lb
    Standard Compaction Width
     39 in
  • T109 Hydraulic Side Shift - Trenchers
    Overall Length
     92.4 in
    Overall Height
     30.9 in
    Overall Width
     56.1 in
  • T109 Hydraulic Side Shift - Trenchers
    Overall Length
     92.4 in
    Overall Height
     30.9 in
    Overall Width
     56.1 in
  • 1400 mm (55 in) - Buckets - Excavator
    Capacity
     197.1 l
    Width
     55.1 in
    Weight
     259.2 lb
  • 3508 - Industrial
    Maximum Power
     1000 HP
    Rated Speed
     1200-1800 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     4309 kg (9500 lb)
  • 3512E - Marine Power Systems

     -

    -
    Aspiration
     TA
  • C12 - Marine Power Systems
    Power Range
     340-490 bhp (254-366 bkW)
    Speed Range
     1800-2300 rpm
    Emissions
     IMO I, IMO II
  • BRX418 Industrial - Brushcutters
    Overall Width
     75.2 in
    Cutting Width
     72 in
    Maximum Cutting Diameter
     8 in
  • 340F UHD - Excavators

     -
    Operating Weight
     117103 lb
  • 1524 mm (60 in) - Fork Accessories

     -

    -
  • 3512 - Industrial
    Maximum Power
     1500 HP
    Rated Speed
     1200-1800 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     6078 kg (13,400 lb)
  • 926M Aggregate Handler - Wheel Loaders
    Rated Net Power
     148 HP
    Operating Weight
     29256 lb
    Bucket Capacities
     3.0-5.0 m³ (3.9-6.5 yd³)
  • 320 - Excavators
    Engine Power - ISO 9249
     172 HP
    Operating Weight
     50265 lb
  • C32 Tier 3 / IMO II - Marine Power Systems
    Power Range
     61-1450 bhp (46-1072 bkW)
    Rated Engine Speed
     1600-2300 rpm
    Emissions
     U.S. EPA Tier 3 / IMO II emissions certified
  • CW-40 - Couplers - Excavator
    Weight
     528 lb
    Width
     22 in
    Load Rating, Hoisting Hook
     11 ton (US)
  • 309 CR - Excavators
    Gross Power - ISO 14396
     74.3 HP
    Operating Weight
     20731 lb
  • 1.0 m3 (1.3 yd3), IT Coupler - Buckets - Backhoe Front
    Capacity
     1.3 yd³
    Width
     89.1 in
    Weight
     1548.9 lb
  • H130 S - Hammers
    Impact Energy Class
     4500 ft·lbf
    Blows per Minute
     320-600
    Maximum Operating Weight
     4719 lb
  • CTX Series Automatic Transfer Switch - Electric Power
    Rating Range
     40-400A
    Transfer Type
     Open transition
    Switch Type
     Contactor Based
  • 914 mm (36 in) - Buckets - Excavator
    Rated Capacity
     10.6 yd³
    Width
     36 in
    Weight
     368.2 lb
  • MH3026 - Material Handlers
    Maximum Net Power - SAE J1349/ISO 9249
     126 kW (169 hp [171 hp/PS*])
    Operating Weight
     25 220-26 150 kg (55,601-57,651 lb)
    Maximum Reach
     37.5 ft
  • 4.1 m3 (5.4 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     5.4 yd³
    Width
     119.4 in
    Weight
     4759.8 lb
  • TIPS

     -

    -
  • C4.4 (50 Hz) - Electric Power
    Minimum Rating
     50 kVA
    Maximum Rating
     110 kVA
    Emissions/Fuel Strategy
     Non Regulated, EU Stage II and EU Stage IIIA
  • 2490 mm (98 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     1.22 yd³
    Width
     98 in
    Weight
     822.3 lb
  • 990K Steel Mill Arrangement - Wheel Loaders
    Net Power
     699 HP
    Operating Weight
     204693 lb
    Bucket Capacities
     8.6-9.2 m3 (11.2-12.0 yd3)
  • C18 Tier 4 Final Sound Attenuated Enclosure - Generator Set Enclosures

     -

    -
  • 914 mm (36 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     12 ft³
    Width
     36 in
    Weight
     509.3 lb
  • 1566 mm (62 in) - Fork Accessories

     -

    -
  • P215 - Pulverizers
    Capacity - Concrete Thickness
     26 in
    Width
     23 in
    Weight
     3710 lb
  • HM415C - Mulchers
    Overall Width
     74.1 in
    Weight
     2960.8 lb
    Required Hydraulics
     XHP / XE
  • QH441/HS

     -

    -
  • 1.0 m3 (1.3 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Backhoe Front
    Capacity
     1.29 yd³
    Width
     94.7 in
    Weight
     1179 lb
  • 229 mm (9 in) - Augers
    Diameter
     10.5 in
    Weight
     33.1 lb
    Overall Length
     9.8 in
  • 0.9 m3 (1.2 yd3), Bolt-On Teeth - Buckets - Compact Wheel Loader
    Capacity
     1.2 yd³
    Width
     74 in
    Weight
     822.1 lb
  • 1730 mm (68 in), Bolt-On Teeth - Buckets - Skid Steer Loader
    Capacity
     0.52 yd³
    Width
     68.1 in
    Weight
     509.3 lb
  • G312 GC Demolition & Sorting Grapple: 587-8713 - Grapples
    Capacity
     0.52 yd³
    Weight - Including Bracket
     2281.78 lb
  • G3304 - Industrial
    Maximum Power
     95 HP

    -
    Weight - Net Dry
     757 kg (1670 lb)
  • 18.35 m³ (24.0 yd³) - Blades
    Capacity
     23.7 yd³
    Width
     168 in
  • G317 GC Demolition & Sorting Grapple: 587-8720 - Grapples
    Capacity
     0.49 yd³
    Weight - Including Bracket
     2266 lb
  • C18 ACERT Tier 3 Recreational - Marine Power Systems
    Power Range
     1015-1150 mhp, 1001-1136 bhp, 747-847 bkW
    Speed Range
     2300 rpm
    Emissions
     EPA Tier 3, IMO II, EU IW
  • 3.66 m (12 ft) - Snow Pushes
    Weight
     509.9 lb
    Overall Height
     16 in
    Working Width
     144 in
  • 3.4m³ (4.5yd³) Fertilizer - Buckets - Loader
    Capacity
     4.5 yd³
    Width
     105 in
    Weight
     2860 lb
  • CB7 - Compactors
    Gross Power
     100 HP
    Operating Weight
     17615 lb
    Standard Compaction Width
     59 in
  • 1.5 m3 (2.0 yd3), Weld-On Teeth - Buckets - Compact Wheel Loader
    Rated Capacity
     2.3 yd³
    Width
     95.8 in
    Weight
     1490.1 lb
  • 619 mm (24 in) - Buckets - Excavator
    Rated Capacity
     6.4 yd³
    Width
     24.4 in
    Weight
     271.2 lb
  • S2090 Straight Scrap & Demolition Shear - Shears
    Length
     170 in
    Height
     74 in
    Width
     30 in
  • BRX118 Industrial - Brushcutters
    Overall Width
     75.2 in
    Cutting Width
     72 in
    Maximum Cutting Diameter
     8 in
  • CM46DF Inline - Electric Power
    Minimum Rating
     5290 kWe
    Maximum Rating
     7930 kWe
    Emissions/Fuel Strategy
     (WB) Cert stage 1 and 2
  • C32 - Industrial
    Maximum Power
     1350 HP
    Rated Speed
     1800-2100 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     2946 kg (6495 lb)
  • 3.1m³ (4yd³) - Buckets - Loader
    Capacity
     4 yd³
    Width
     117 in
    Weight
     3565 lb
  • 988K Block Handler Arrangement - Wheel Loaders
    Net Power
     541 HP
    Operating Weight
     135602 lb
  • 3508 - Industrial
    Maximum Power
     1065 HP
    Rated Speed
     1460-1750 rpm
    Weight - Approximate, Net Dry (Basic Operating Engine Without Optional Attachments)
     5355 kg (11805 lb)
  • D5K2 Shiphold / Port Handling - Dozers
    Power - Net
     104 HP
    Operating Weight - XL
     22544 lb
  • C9 230-275 kVA ACERT - Generator Set Enclosures

     -

    -
  • Round To Hex Adapter - Auger Accessories

     -

    -
  • A68 - Augers
    Drive Shaft Torque at Maximum Pressure
     5034.6 lb/ft
    Drive Method
     Gerotor Motor - Double Planetary Drive
    Mounting Bracket Design
     Skid Steer Loader, Compact Wheel Loader
  • 745 - Articulated Trucks
    Gross Power - SAE J1995
     511 HP
    Rated Payload
     45.2 t
    Heaped (SAE 2:1)
     32.7 yd³
  • 13m³ (17yd³) - Buckets - Loader
    Capacity
     17 yd³
    Width
     162 in
    Weight
     13945 lb
  • 3.5 m3 (4.6 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     4.5 yd³
    Width
     108.1 in
    Weight
     2903.5 lb
  • AP300F - Asphalt Pavers
    Gross Power
     73.8 HP
    Operating Weight - With SE34 VT
     18078 lb
    Standard Paving Range
     1.75 - 3.42 m (5.6' - 11.1')
  • C0.7 - Industrial
    Maximum Power
     17.8 HP
    Rated Speed
     2200-3600 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     156.6 lb
  • 600 mm (24 in) - Buckets - Excavator
    Capacity
     3.2 ft³
    Width
     23.6 in
    Weight
     155.4 lb
  • 325F L (2017) - Excavators

     -
    Operating Weight
     60032 lb
  • 428F2 - Backhoe Loaders
    Power - Net
     89.3 HP
    Operating Weight - Nominal
     18574 lb
    Operating Weight - Maximum
     24251 lb
  • 3048mm (120 in) Cushion Dozer - Blades
    Width
     120 in
    Height
     62 in
  • 3.05 m (10 ft) - Snow Pushes
    Weight
     3692.7 lb
    Overall Height
     38.4 in
    Working Width
     120 in
  • 315 - Excavators

     -
    Operating Weight
     34000 lb
  • 1829 mm (72 in) - Forks
    Width
     72 in
    Height - Grapples Closed
     32 in
    Weight
     1208.1 lb
  • 24 - Motor Graders
    Base Power (1st Gear) - Net
     535 HP
    Operating Weight - Typically Equipped
     161695 lb
    Blade Width
     24 ft
  • 457 mm (18 in) - Augers
    Diameter
     19.5 in
    Weight
     55.1 lb
    Overall Length
     10.9 in
  • 1.7 m3 (2.2 yd3), IT Coupler, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
     2.4 yd³
    Width
     94.5 in
    Weight
     1393.1 lb
  • C9 ACERT - Marine Power Systems
    Power Range
     503-567 bhp (375-423 bkW)
    Speed Range
     2500 rpm
    Emissions
     IMO II
  • CTSM and CTGM Series Manual Transfer Switches - Electric Power
    Rating Range
     40-4000A
    Transfer Type
     Open / Manual
    Switch Type
     Contactor Based
  • 1.1 m3 (1.4 yd3), IT Coupler - Buckets - Backhoe Front
    Capacity
     1.4 yd³
    Width
     95.5 in
    Weight
     1612 lb
  • 3516 - Industrial
    Maximum Power
     1985 HP
    Rated Speed
     1460-1750 rpm
    Weight - Approximate, Net Dry (Basic Operating Engine Without Optional Attachments)
     8074 kg (17800 lb)
  • CW-20S - Couplers - Excavator
    Weight
     418 lb
    Width
     16.8 in
    Load Rating, Hoisting Hook
     11 ton (US)
  • CS68B - Compactors
    Gross Power
     157 HP
    Operating Weight - With Cab
     31572 lb
    Compaction Width
     84 in
  • 457 mm (18 in) - Buckets - Excavator
    Rated Capacity
     4.4 yd³
    Width
     18 in
    Weight
     227.1 lb
  • 1200 mm (47 in) - Buckets - Excavator
    Capacity
     167.1 l
    Width
     47.2 in
    Weight
     235.7 lb
  • C280-6 - Marine Power Systems
    Maximum Rating
     1820 ekW (2275 kVA)
    Minimum Rating
     1760 ekW (2200 kVA)
    Frequency
     50 Hz or 60 Hz
  • 3.05 m (10 ft) - Snow Pushes
    Weight
     476.2 lb
    Overall Height
     16 in
    Working Width
     120 in
  • 610 mm (24 in) - Augers
    Diameter
     610/305 mm (24/12 in)
    Weight
     163.1 lb
    Overall Length
     50.7 in
  • 400 mm (16 in) - Buckets - Excavator
    Capacity
     1.2 ft³
    Width
     15.7 in
    Weight
     78 lb
  • 1524 mm (60 in) - Forks
    Carriage Width
     98.3 in
    Carriage Height
     61 in
    Carriage Weight
     1164.7 lb
  • 5.0 m3 (6.5 yd3), Fusion™, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     6.5 yd³
    Width
     108.1 in
    Weight
     3311.3 lb
  • 313F L - Excavators
    Gross Power - SAE J1995
     74 kW (100 hp/101 PS)
    Operating Weight
     33080 lb
  • AP655F - Asphalt Pavers
    Gross Power
     173 HP
    Operating Weight - SE60 V Screed only
     7495 lb
    Standard Paving Range - SE50 V, SE50 VT
     2.55 - 5.0 m (8' 4" - 16' 4")
  • 2.1 m3 (2.7 yd3), Fusion™ Coupler - Buckets - Loader
    Capacity
     2.7 yd³
    Width
     100 in
    Weight
     1818.8 lb
  • 5.0 m3 (6.5 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     6.5 yd³
    Width
     108.1 in
    Weight
     3298.1 lb
  • 2.7m³ (3.5yd³) - Buckets - Loader
    Capacity
     3.5 yd³
    Width
     106 in
    Weight
     3494 lb
  • 3606 - Industrial
    Maximum Power
     2481 HP
    Rated Speed
     750-1000 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     15,680 kg (34,500 lb)
  • 1803 mm (71 in) - Bale Grabs
    Overall Width
     55.2 in
    Overall Height
     34.4 in
    Maximum Opening Width
     71 in
  • 5.7m³ (7.5yd³) Performance Series - Buckets - Loader
    Capacity
     7.5 yd³
    Width
     134 in
    Weight
     6129 lb
  • 1576 mm (62 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Width
     62 in
    Height - Grapples Closed
     20.7 in
    Jaw Opening
     40 in
  • T112 Manual Side Shift - Trenchers
    Overall Length
     106.5 in
    Overall Height
     30.9 in
    Overall Width
     74.8 in
  • 610 mm (24 in) - Augers
    Diameter
     25.5 in
    Weight
     78.9 lb
    Overall Length
     11.9 in
  • Heavy Duty Bucket 1050 mm (42 in): 558-7939 - Buckets - Excavator
    Capacity
     1.31 yd³
    Width
     42 in
    Weight
     2085 lb
  • 3512C - Industrial
    Maximum Power
     1500 HP
    Rated Speed
     1800 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     6078 kg (13,400 lb)
  • 914 mm (36 in), Pin On - Buckets - Backhoe Rear
    Capacity
     11.5 ft³
    Width
     36 in
    Weight
     451.9 lb
  • Pin Grabber Coupler (DB-Linkage): 455-3905 - Couplers - Excavator
    Weight
     1370 lb
    Width - Machine Interface
     23.2 in
    Lifting Eye Working Load Limit
     30865 ton (US)
  • 1.5 m3 (2.0 yd3), ISO Coupler, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
     2.1 yd³
    Width
     94.5 in
    Weight
     1304.9 lb
  • 0.6 m3 (0.8 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     0.8 yd³
    Width
     70.5 in
    Weight
     686.1 lb
  • 966-972 Fusion™ - Couplers - Loader
    Weight
     1244 lb

    -
  • 953K WH - Track Loaders
    Net Power - Rated - ISO 9249/SAE J1349
     154 HP
    Operating Weight
     34024 lb
    Capacity - General Purpose Landfill
     3 yd³
  • 972M XE - Wheel Loaders
    Maximum Net Power - 1,600 rpm - ISO 9249
     311 HP
    Operating Weight
     54871 lb
    Bucket Capacities
     3.20-9.94 m³ (4.19-13.00 yd³)
  • H110 S - Hammers
    Impact Energy Class
     2000 ft·lbf
    Blows per Minute
     450-1000
    Maximum Operating Weight
     2381 lb
  • C12 - Marine Power Systems
    Power Range
     578-609 mhp (570-600 bhp)
    Speed Range
     2300 rpm
    Emissions
     IMO I
  • HM112C - Mulchers
    Overall Width
     59.8 in
    Weight
     1682.1 lb
    Required Hydraulics
     Standard Flow
  • 770G WTR Bare Chassis - Off-Highway Trucks

     -

    -
  • GSH520 5-Tine, 600-Liter Orange Peel Grapple - Grapples
    Capacity
     0.75 yd³
    Operating Weight
     3073 lb
  • CW-20 - Couplers - Excavator
    Weight
     418 lb
    Width
     22 in
    Load Rating, Hoisting Hook
     11 ton (US)
  • DE65 GC (60 Hz) - Electric Power
    Minimum Rating
     60 ekW
    Maximum Rating
     60 ekW
    Emissions/Fuel Strategy
     Non Regulated
  • TH357D Ag Handler - Telehandlers
    Maximum Lift Height
     22.97 ft
    Operating Weight - With Carriage and Forks*
     17163 lb
    Rated Load Capacity
     7716 lb
  • 457 mm (18 in) - Augers
    Diameter
     18 in
    Weight
     108 lb
    Overall Length
     48.2 in
  • 1829 mm (72 in) - Forks
    Carriage Width
     98.3 in
    Carriage Height
     52 in
    Carriage Weight
     1172.9 lb
  • H115 GC S - Hammers
    Impact Energy Class
     2212 ft-lb
    Blows per Minute
     450-800
    Maximum Operating Weight
     2928.2 lb
  • PM310 Track Undercarriage - Cold Planers
    Rated Power
     336.6 HP
    Operating Weight
     48016 lb
    Milling Width
     39.4 in
  • CG170B-20 - Electric Power
    Fuel Type
     Natural Gas, Biogas, Coal Gas
    Frequency
     50 Hz
  • WEAR PROTECTION

     -

    -
  • G324 WH Demolition & Sorting Grapple: 587-8988 - Grapples
    Capacity
     2.62 yd³
    Weight
     4861 lb
  • 326 - Excavators
    Engine Power - ISO 9249
     201 HP
    Operating Weight
     57100 lb
  • MP345 Concrete Cutter Jaw - Multi-Processors
    Length
     92.3 in
    Height
     86.6 in
    Width
     39.6 in
  • 38.23 m³ (50.0 yd³) - Blades
    Capacity
     50 yd³
    Width
     214 in
  • UH440E

     -

    -
  • 1.9 m3 (2.5 yd3), IT Coupler, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
     2.6 yd³
    Width
     94.5 in
    Weight
     1470 lb
  • 1.03 m3 (1.35 yd3) Pin On, Bolt-On Cutting Edge - Buckets - Backhoe Front
    Capacity
     1.29 yd³
    Width
     89.1 in
    Weight
     1742.1 lb
  • C280-6 - Marine Power Systems
    Power Range
     2320-2722 bhp (1730-2030 bkW)
    Speed Range
     900-1000 rpm
    Emissions
     IMO II
  • 4.1 m3 (5.4 yd3), Fusion™, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     5.4 yd³
    Width
     119.4 in
    Weight
     4687 lb
  • CW-45S - Couplers - Excavator
    Weight
     880 lb
    Width
     22 in
    Load Rating, Hoisting Hook
     15.4 ton (US)
  • C18 ACERT IMO II - Marine Power Systems
    Power Range
     454-715 bhp (339-533 bkW)
    Speed Range
     1800-2100 rpm
    Emissions
     IMO II, EU IIIA
  • 914 mm (36 in) Pin On - Buckets - Backhoe Rear
    Capacity
     13.4 ft³
    Width
     36 in
    Weight
     491.6 lb
  • DE55 GC (60 Hz) - Electric Power
    Minimum Rating
     50 ekW
    Maximum Rating
     50 ekW
    Emissions/Fuel Strategy
     Non Regulated
  • 74.93 m³ (98.0 yd³) - Blades
    Capacity
     98 yd³
    Width
     322 in
  • 457 mm (18 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     6.4 ft³
    Width
     18 in
    Weight
     357.1 lb
  • H120 S - Hammers
    Impact Energy Class
     3500 ft·lbf
    Blows per Minute
     350-620
    Maximum Operating Weight
     4101 lb
  • 1042 mm (41 in) - Fork Accessories

     -

    -
  • 330 - Excavators
    Engine Power - ISO 9249
     273 HP
    Operating Weight
     68100 lb
  • 2.7 m3 (3.5 yd3), Fusion™, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     3.5 yd³
    Width
     108.1 in
    Weight
     2638.9 lb
  • GSH520 5-Tine, 500-Liter Orange Peel Grapple - Grapples
    Capacity
     0.65 yd³
    Operating Weight
     3003 lb
  • 4.2m³ (5.5yd³) - Buckets - Loader
    Capacity
     5.5 yd³
    Width
     116 in
    Weight
     3800 lb
  • 6.9m³ (9yd³) Serrated Edge - Buckets - Loader
    Capacity
     9 yd³
    Width
     156 in
    Weight
     12421 lb
  • MB250 - Buckets - Skid Steer Loader
    Capacity
     0.33 yd³
    Height
     34.5 in
    Weight
     948 lb
  • 1290mm (51in) Ripper - Rippers
    Overall Length
     67 in
    Weight
     1717 lb
    Width
     22.4 in
  • 3505mm (138 in) Cushion Dozer - Blades
    Width
     138 in
    Height
     70 in
  • 973K WH - Track Loaders
    Net Power - Rated - ISO 9249/SAE J1349
     275 HP
    Operating Weight
     64319 lb
    Capacity - General Purpose Landfill
     6.4 yd³
  • 1.9 m3 (2.5 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
     2.4 yd³
    Width
     94.5 in
    Weight
     1436.1 lb
  • C12.9 - Marine Power Systems
    Power Range
     850-1000 mhp, 838-985 bhp, 625-735 bkW
    Speed Range
     2300 rpm
    Emissions
     EPA Tier 3, IMO II, EU Stage IIIA
  • 3516C (50 Hz) with Upgradeable Package - Electric Power
    Minimum Rating
     2500 kVA
    Maximum Rating
     2750 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption
  • 1.1 m3 (1.4 yd3) Pin On - Buckets - Backhoe Front
    Capacity
     1.4 yd³
    Width
     95.5 in
    Weight
     2002.9 lb
  • DG400 GC (3 phase) - Electric Power
    Fuel System
     Carburetor, Down Draft
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • 315F L - Excavators
    Gross Power - SAE J1995
     74 kW (100 hp/101 PS)
    Operating Weight
     37794 lb
  • 305 mm (12 in) - Buckets - Excavator
    Rated Capacity
     2.1 yd³
    Width
     12 in
    Weight
     156.5 lb
  • 2035 mm (80 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Width
     80.2 in
    Height - Grapples Closed
     20.7 in
    Jaw Opening
     40 in
  • HMF110 - Flail Mowers

     -

    -
  • C3.3 (50 Hz) - Electric Power
    Minimum Rating
     24.0 kVA
    Maximum Rating
     65.0 kVA
    Emissions/Fuel Strategy
     Non Regulated, EU Stage II and EU Stage IIIA
  • 302 CR - Excavators
    Gross Power - ISO 14396
     21.6 HP
    Operating Weight
     4987 lb
  • 1397 mm (55 in) - Fork Accessories

     -

    -
  • 152 mm (6 in) - Augers
    Diameter
     6 in
    Weight
     50.7 lb
    Overall Length
     48.7 in
  • 1.14 m3 (1.5 yd3), Pin On - Buckets - Backhoe Front
    Capacity
     1.5 yd³
    Width
     94.7 in
    Weight
     1056 lb
  • G3406 - Industrial
    Maximum Power
     325 HP

    -
    Weight - Net Dry
     1362 kg (3000 lb)
  • T109 Hydraulic Side Shift - Trenchers
    Overall Length
     92.4 in
    Overall Height
     30.9 in
    Overall Width
     56.1 in
  • MB200 - Buckets - Skid Steer Loader
    Capacity
     0.26 yd³
    Height
     28.8 in
    Weight
     639 lb
  • 797F - Off-Highway Trucks
    Gross Power - SAE J1995
     4000 HP

    -
    Top Speed - Loaded
     39.5 mile/h
  • 793D - Off-Highway Trucks
    Gross Power - SAE J1995
     2415 HP

    -
    Top Speed - Loaded
     33.7 mile/h
  • 950 mm (37 in) - Rippers
    Overall Length
     31.3 in
    Weight
     372.6 lb
    Width
     16.5 in
  • 1.0 m3 (1.3 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     1.3 yd³
    Width
     80.5 in
    Weight
     910.1 lb
  • 4.4m³ (5.75yd³) Performance Series - Buckets - Loader
    Capacity
     5.75 yd³
    Width
     138 in
    Weight
     6175 lb
  • 4.7m³ (6.2yd³) Iron Ore - Buckets - Loader
    Capacity
     6.2 yd³
    Width
     154 in
    Weight
     12723 lb
  • C18 - Industrial
    Maximum Power
     800 HP
    Rated Speed
     1800-2100 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     1673 kg (3688 lb)
  • 374F - Excavators
    Engine Power - ISO 9249
     472 HP
    Operating Weight
     161533 lb
  • 1120 mm (44 in) - Fork Accessories

     -

    -
  • C18 - Industrial
    Maximum Power
     800 HP
    Rated Speed
     1500-2100 rpm
    Weight - Approximate, Net Dry (Basic Operating Engine Without Optional Attachments)
     1953 kg (4306 lb)
  • G3516/G3516B - Industrial
    Maximum Power
     1380 HP

    -
    Weight - Net Dry
     8401 kg (18520 lb)
  • 508 mm (20 in) - Buckets - Excavator
    Rated Capacity
     3.3 yd³
    Width
     20 in
    Weight
     191.8 lb
  • CW-45S - Couplers - Excavator
    Weight
     880 lb
    Width
     22 in
    Load Rating, Hoisting Hook
     15.4 ton (US)
  • AD45B - Underground - Hard Rock
    Gross Power - SAE J1995
     589 HP
    Loaded
     187393 lb
    Nominal Payload Capacity
     99208 lb
  • 3.05 m (10 ft) - Snow Pushes
    Weight
     1153 lb
    Overall Height
     39.1 in
    Working Width
     120 in
  • QE241

     -

    -
  • A68 - Augers
    Drive Shaft Torque at Maximum Pressure
     5034.6 lb/ft
    Drive Method
     Gerotor Motor - Double Planetary Reduction
    Mounting Bracket Design
     Mini Excavator
  • D3K2 Mulcher - Dozers
    Power - Net
     104 HP
    Operating Weight - XL
     23746 lb
  • 12.2m³ (16yd³) - Buckets - Loader
    Capacity
     16 yd³
    Width
     203 in
    Weight
     33451 lb
  • QJ241

     -

    -
  • TRANSMISSION

     -

    -
  • 914 mm (36 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     16.2 ft³
    Width
     36 in
    Weight
     560 lb
  • 1.9 m3 (2.5 yd3), Fusion™ Coupler - Buckets - Loader
    Capacity
     2.5 yd³
    Width
     99.7 in
    Weight
     1708.6 lb
  • 257D3 - Skid Steer Loaders
    Gross Power - SAE J1995
     74.3 HP
    Operating Weight
     8094 lb
  • 3512B - Industrial
    Maximum Power
     1650 HP
    Rated Speed
     1800 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     6078 kg (13,400 lb)
  • 232D3 - Skid Steer Loaders
    Gross Power - SAE J1995
     67.1 HP
    Operating Weight
     6514 lb
    Rated Operating Capacity
     1900 lb
  • 7m³ (9.2yd³) Standard Rock Mass Excavation - Buckets - Mining Shovels

     -

    -
  • C18 - Industrial
    Maximum Power
     630 HP
    Rated Speed
     1800-2000 rpm
    Weight - Approximate, Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     2113-2650 kg (4658-5842 lb)
  • 500 mm (20 in) - Buckets - Excavator
    Capacity
     2.6 ft³
    Width
     19.7 in
    Weight
     140.2 lb
  • 3512B (50 Hz) - Electric Power
    Minimum Rating
     1320 kVA
    Maximum Rating
     1875 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption, Low Emissions
  • 938M Aggregate Handler - Wheel Loaders
    Rated Net Power
     182 HP
    Operating Weight
     36075 lb
    Bucket Capacities
     2.9-3.2 m3 (3.8-4.2 yd3)
  • C27 - Industrial
    Maximum Power
     630 HP
    Rated Speed
     1800-2000 rpm
  • 1200 mm (47 in) - Buckets - Excavator
    Rated Capacity
     9.18 yd³
    Width
     47.2 in
    Weight
     410.5 lb
  • LT114 - Tillers
    Length
     37.6 in
    Height
     29.7 in
    Overall Width
     70.4 in
  • QUALITY PARTS AT REDUCED COST

     -

    -
  • HOW REMANUFACTURING WORKS

     -

    -
  • CW-55S - Couplers - Excavator
    Weight
     1210 lb
    Width
     22.4 in
    Load Rating, Hoisting Hook
     22 ton (US)
  • 4.26 m (14 ft) - Snow Pushes
    Weight
     3031.4 lb
    Overall Height
     42.8 in
    Working Width
     168 in
  • GSH425 4-Tine, 950-Liter Orange Peel Grapple - Grapples
    Capacity
     1.25 yd³
    Operating Weight
     3545 lb
  • 2.3 m3 (3.0 yd3), Pin On - Buckets - Loader
    Capacity
     3 yd³
    Width
     99.5 in
    Weight
     1966.5 lb
  • 262D3 - Skid Steer Loaders
    Gross Power - SAE J1995
     74.3 HP
    Operating Weight
     8296 lb
    Rated Operating Capacity
     2700 lb
  • 953K - Track Loaders
    Net Power (Rated) - SAE J1349/ISO 9249
     154 HP
    Operating Weight
     33852 lb
    Capacity - General Purpose
     2.4 yd³
  • 3.1m³ (4yd³) - Buckets - Loader
    Capacity
     4 yd³
    Width
     115 in
    Weight
     2957 lb
  • AD60 - Underground - Hard Rock
    Gross Power - SAE J1995
     805 HP
    Loaded
     246917 lb
    Nominal Payload Capacity
     132277 lb
  • CS66B - Compactors
    Gross Power
     157 HP
    Operating Weight - With Cab
     27245 lb
    Compaction Width
     84 in
  • 1.1 m3 (1.4 yd3) Pin On, Bolt-On Teeth - Buckets - Backhoe Front
    Capacity
     1.4 yd³
    Width
     95.5 in
    Weight
     1722 lb
  • C13, C15, C18 WP Enclosure. 350-600 kW 60 Hz - Generator Set Enclosures

     -

    -
  • 3516C IMO II - Marine Power Systems
    Power Range
     1650-3386 bhp (1230-2525 bkW)
    Speed Range
     1200-1800 rpm
    Emissions
     IMO II
  • C4.4 - Industrial
    Maximum Power
     142 HP
    Rated Speed
     2200 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     360 kg (793.7 lb)
  • C4.4 - Industrial
    Maximum Power
     111.3 HP
    Rated Speed
     2200-2400 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     291-306 kg (640-674.6 lb)
  • 930M Waste Handler - Wheel Loaders
    Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4)
     160 HP
    Operating Weight
     33396 lb
    Bucket Capacities
     3.0-5.0 m3 (3.9-6.5 yd3)
  • CM25E - Electric Power
    Minimum Rating
     1940 kWe
    Maximum Rating
     2910 kWe
    Emissions/Fuel Strategy
     (WB) Cert stage 1 and 2
  • CM20C - Electric Power
    Minimum Rating
     985 kWe
    Maximum Rating
     1650 kWe
    Emissions/Fuel Strategy
     (WB) Stage 1 and 2
  • 1.0 m3 (1.31 yd3), IT Coupler, Bolt-On Teeth - Buckets - Backhoe Front
    Capacity
     1.31 yd³
    Width
     94.7 in
    Weight
     1041.9 lb
  • 906M - Wheel Loaders
    Net Power
     74 HP
    Operating Weight
     12346 lb
    Bucket Capacities
     0.75-1.5 m3 (1.0-2.0 yd3)
  • 1.5 m3 (1.95 yd3) - Buckets - Telehandler
    Rated Bucket Capacity
     1.95 yd³
    Width
     95 in
    Bucket Weight
     1058 lb
  • C32 (50 Hz) - Electric Power
    Minimum Rating
     910 kVA
    Maximum Rating
     1500 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption, Low Emissions, EPA Certified for Stationary Emergency Application (Emits Equivalent U.S. EPA Tier 2 Nonroad Standards)
  • C32 IMO III - Marine Power Systems
    Maximum Rating
     940 ekW
    Minimum Rating
     219 ekW
    Frequency
     60hz
  • C32 Tier 4 / IMO III - Marine Power Systems
    Maximum Rating
     1333 BHP
    Minimum Rating
     400 BHP
    Aspiration
     Turbocharged-aftercooled
  • 1.3 m3 (1.7 yd3), Bolt-On Teeth - Buckets - Compact Wheel Loader
    Capacity
     1.7 yd³
    Width
     81.1 in
    Weight
     961.2 lb
  • 1829 mm (72 in) - Rakes
    Width
     72 in
    Weight
     1069.9 lb
    Jaw Opening
     37 in
  • DE200 GC (50 Hz) - Electric Power
    Minimum Rating
     200 kVA
    Maximum Rating
     200 kVA
    Emissions/Fuel Strategy
     Non Regulated
  • 2642 mm (104 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     1.74 yd³
    Width
     104 in
    Weight
     921.5 lb
  • LR15B - Rakes
    Bucket Capacity - Struck
     0.4 yd³
    Weight
     1311.7 lb
    Length
     63.8 in
  • 1566 mm (62 in) - Fork Accessories

     -

    -
  • 930M - Wheel Loaders
    Rated Net Power
     157 HP
    Operating Weight
     31382 lb
    Bucket Capacities
     2.1-5.0 m³ (2.7-6.5 yd³)
  • 249D3 - Skid Steer Loaders
    Gross Power - SAE J1995
     67.1 HP
    Operating Weight
     7831 lb
  • C9.3 Marine Generator Set - Marine Power Systems
    Maximum Rating
     250R ekW (313 kVA) at 50hz, 300 ekW (375 kVA) at 60hz
    Minimum Rating
     185R ekW (231 kVA) at 50hz, 224R ekW (280 kVA) at 60hz
    Frequency
     50 Hertz & 60 Hertz
  • SE50 V Vibratory Screed - Asphalt Pavers
    Standard Weight
     7239 lb
    Standard Paving Range
     2.55 - 5.0 m (8' 4" - 16' 4")
  • 0.9 m3 (1.2 yd3), Bolt-On Teeth - Buckets - Compact Wheel Loader
    Capacity
     1.2 yd³
    Width
     81.9 in
    Weight
     1230 lb
  • C32 Tier 3 / IMO II - Marine Power Systems
    Maximum Rating
     940 ekW
    Minimum Rating
     219 ekW
    Frequency
     60hz
  • C1.5 - Marine Power Systems
    Maximum Rating
     13 ekW (16.5 kVA)
    Minimum Rating
     10 ekW (10 kVA)
    Frequency
     50 Hz or 60 Hz
  • C32 Tier 3 - Marine Power Systems
    Maximum Rating
     1333 BHP
    Minimum Rating
     1047 BHP
    Aspiration
     TTA
  • 1627mm (64in) Ripper - Rippers
    Overall Length
     83.1 in
    Weight
     3558 lb
    Width
     32.2 in
  • 7.4m (9.7)yd General Duty - Buckets - Mining Shovels

     -

    -
  • 3.8m³ (5yd³) - Buckets - Loader
    Capacity
     5 yd³
    Width
     121 in
    Weight
     3650 lb
  • 460 mm (18 in) - Buckets - Excavator
    Capacity
     2.3 ft³
    Width
     18.1 in
    Weight
     130.3 lb
  • 3.8 m3 (5.0 yd3), Fusion™, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     5 yd³
    Width
     108.1 in
    Weight
     3015.9 lb
  • KNOW THE ADVANTAGES

     -

    -
  • C1.1 (50 Hz) - Electric Power
    Minimum Rating
     6.8 kVA
    Maximum Rating
     9.5 kVA
    Emissions/Fuel Strategy
     EU Stage IIIA
  • CW-30 - Couplers - Excavator
    Weight
     462 lb
    Width
     22 in
    Load Rating, Hoisting Hook
     11 ton (US)
  • 260 mm (10 in) - Buckets - Excavator
    Capacity
     1 ft³
    Width
     10.2 in
    Weight
     103.4 lb
  • D9T - Dozers
    Flywheel Power
     436 HP
    Operating Weight
     106618 lb
  • 1.0 m3 (1.3 yd3), Bolt-On Teeth - Buckets - Compact Wheel Loader
    Capacity
     1.3 yd³
    Width
     80.2 in
    Weight
     865.5 lb
  • 1.2 m3 (1.6 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     1.5 yd³
    Width
     81.9 in
    Weight
     1018.8 lb
  • 3516 (50 Hz) - Electric Power
    Minimum Rating
     1600 kVA
    Maximum Rating
     2000 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption
  • GSH420 4-Tine, 600-Liter Orange Peel Grapple - Grapples
    Capacity
     0.75 yd³
    Operating Weight
     2573 lb
  • 1290mm (51in) Ripper - Rippers
    Overall Length
     67 in
    Weight
     1717 lb
    Width
     22.4 in
  • 2.7m³ (3.5yd³) - Buckets - Loader
    Capacity
     3.5 yd³
    Width
     106 in
    Weight
     2046 lb
  • 12.2m³ (16yd³) Serrated Edge - Buckets - Loader
    Capacity
     16 yd³
    Width
     190 in
    Weight
     22620 lb
  • 400 mm (16 in) - Buckets - Excavator
    Capacity
     1.6 ft³
    Width
     15.7 in
    Weight
     111.1 lb
  • 1.5 m3 (2.0 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     2 yd³
    Width
     81.9 in
    Weight
     1137.1 lb
  • D11 - Dozers
    Engine Power - Net SAE J1349/ISO 9249 - Forward
     850 HP
    Operating Weight
     229800 lb
  • 610 mm (24 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     9.2 ft³
    Width
     24 in
    Weight
     427.7 lb
  • 3516C (50 Hz) - Electric Power
    Minimum Rating
     2250 kVA
    Maximum Rating
     3125 kVA
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Use Only (Tier 2 Nonroad Equivalent Emission Standards)
  • 289D3 - Skid Steer Loaders
    Gross Power - SAE J1995
     74.3 HP
    Operating Weight
     10688 lb
  • 0.76 m3 (1.0 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Backhoe Front
    Capacity
     0.99 yd³
    Width
     89.1 in
    Weight
     975.5 lb
  • C7.1 - Industrial
    Maximum Power
     217 HP
    Rated Speed
     1950-2200 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     506 kg (1115 lb)
  • 279D - Compact Track and Multi Terrain Loaders
    Gross Power
     74.3 HP
    Operating Weight
     9893 lb
  • 25m³ (32.7yd³) Iron Ore - Buckets - Mining Shovels

     -

    -
  • M315F - Excavators

     -
    Operating Weight*
     16 700 to 17 960 kg (36,817 to 39,595 lb)
  • 1.3 m3 (1.7 yd3), ISO Coupler, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
     1.9 yd³
    Width
     94.5 in
    Weight
     1261 lb
  • 152 mm (6 in) - Augers
    Diameter
     7.5 in
    Weight
     23.4 lb
    Overall Length
     9.4 in
  • 3606 (50 Hz) - Electric Power
    Minimum Rating
     1775 kVA
    Maximum Rating
     2688 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption
  • C3.4B, Less than 56 kW (75 hp) - Industrial
    Maximum Power
     74 HP
    Rated Speed
     2200
    Weight - Approximate, Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     359 kg (791.5 lb)
  • 226D3 - Skid Steer Loaders
    Gross Power - SAE J1995
     67.1 HP
    Operating Weight
     5849 lb
    Rated Operating Capacity
     1550 lb
  • M 43 C - Marine Power Systems
    Power Range
     6000 - 9450 kW
    Speed Range
     500-514 rpm
    Emissions
     IMO II
  • 140 / 140 AWD - Motor Graders
    Base Power (1st Gear) - Net
     179 HP
    Operating Weight - Typically Equipped
     42647 lb
    Blade Width
     12 ft
  • 11.5m³ (15yd³) - Buckets - Loader
    Capacity
     15 yd³
    Width
     162 in
    Weight
     13030 lb
  • 1829 mm (72 in) - Forks
    Width
     72 in
    Height
     22.9 in
    Weight
     485 lb
  • ATC-300+ CONTROLLER - Electric Power
    Rating Range
     120 to 600V, single phase and three phase @ 50/60 Hz
    Transfer Type
     Switch application dependent
    Switch Type
     Switch application dependent
  • 3616 (50 Hz) - Electric Power
    Minimum Rating
     4700 kVA
    Maximum Rating
     7520 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption
  • 4.87 m (16 ft) - Snow Pushes
    Weight
     3112.9 lb
    Overall Height
     42.8 in
    Working Width
     192 in
  • 1.2 m3 (1.6 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     1.6 yd³
    Width
     81.9 in
    Weight
     1015.9 lb
  • 4.87 m (16 ft) - Snow Pushes
    Weight
     3249.6 lb
    Overall Height
     44.4 in
    Working Width
     192 in
  • 1220 mm (48 in) - Fork Accessories

     -

    -
  • 257D - Compact Track and Multi Terrain Loaders
    Gross Power
     74.3 HP
    Operating Weight
     8048 lb
  • G313 GC Demolition & Sorting Grapple: 587-8718 - Grapples
    Capacity
     0.59 yd³
    Weight - Including Bracket
     3053.4 lb
  • DFS124 - Silage Defacers
    Weight
     1108.9 lb
    Overall Height
     25.2 in
    Overall Width
     96.5 in
  • 300.9D VPS & HPU300 - Excavators
    Gross Power
     13 HP
    Operating Weight
     2399 lb
  • C9.3 - Industrial
    Maximum Power
     400 HP
    Rated Speed
     1800-2200 rpm
    Weight - Approximate, Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     1678-1839 kg (3699-4055 lb)
  • SE50 VT Tamper Bar Screed - Asphalt Pavers
    Standard Weight
     7363 lb
    Standard Paving Range
     2.55 - 5.0 m (8' 4" - 16' 4")
  • 30-220 kVA SA Lvl 1 Enclosure - Generator Set Enclosures

     -

    -
  • MP332 Pulverizer Jaw - Multi-Processors

     -

    -
  • CM43C Inline - Electric Power
    Minimum Rating
     5520 kWe
    Maximum Rating
     8290 kWe
    Emissions/Fuel Strategy
     (WB) Cert stage 1 and 2
  • 1200 mm (47 in) - Buckets - Excavator
    Capacity
     4.1 ft³
    Width
     47.2 in
    Weight
     193.3 lb
  • 0.95 m3 (1.25 yd3), IT Coupler - Buckets - Backhoe Front
    Capacity
     1.26 yd³
    Width
     89.1 in
    Weight
     957 lb
  • C280-12 - Marine Power Systems
    Power Range
     4640-5096 bhp (3460-3800 bkW)
    Speed Range
     900 rpm
    Emissions
     IMO II
  • 1100 mm (43 in) - Buckets - Excavator
    Rated Capacity
     3.88 yd³
    Width
     43.3 in
    Weight
     293.6 lb
  • 6.4m³ (8.3yd³) Performance Series - Buckets - Loader
    Capacity
     8.3 yd³
    Width
     157 in
    Weight
     16385 lb
  • 434 - Backhoe Loaders
    Power - Net
     92 HP
    Operating Weight - Nominal
     20216 lb
    Operating Weight - Maximum
     25353 lb
  • 610 mm (24 in) - Buckets - Excavator
    Rated Capacity
     8.1 yd³
    Width
     24 in
    Weight
     427.7 lb
  • 17m³ (22.5yd³) - Buckets - Loader
    Capacity
     22.5 yd³
    Width
     222 in
    Weight
     42955 lb
  • QE442/FF/E

     -

    -
  • C18 - Industrial
    Maximum Power
     630 HP
    Rated Speed
     1800-2100
    Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     2197.1 kg (4843.7 lb)
  • 1.1 m3 (1.4 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Backhoe Front
    Capacity
     1.4 yd³
    Width
     89.1 in
    Weight
     1162 lb
  • 13.8m³ (18yd³) - Buckets - Loader
    Capacity
     18 yd³
    Width
     200 in
    Weight
     30852 lb
  • C3.4B, Greater than 56 kW (75 hp) - Industrial
    Maximum Power
     115 HP
    Rated Speed
     2200
    Weight - Approximate, Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     407 kg (897 lb)
  • C1.1 - Industrial
    Maximum Power
     25 HP
    Rated Speed
     2200-3400 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     87 kg (191 lb)
  • 1730 mm (68 in) - Buckets - Skid Steer Loader
    Capacity
     0.68 yd³
    Width
     68.1 in
    Weight
     804.7 lb
  • Emergency Transfer Load Manager (EXL) - Electric Power
    Configuration
     Wall mounted paralleling control system that monitors and controls a single generator and a single utility.
    Modes of Operation
     Utility Import, Export, and base load operations, Peak shaving, and Emergency Standby. Closed Transition to/from Generator Power
    Application
     LV and MV (208V-32kV)
  • 2298mm (90in) - Forks
    Fork Width
     90 in
    Inside Height
     55 in
    Weight
     5451 lb
  • 1550 mm (61 in) - Fork Accessories

     -

    -
  • 1.15 m3 (1.5 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Backhoe Front
    Capacity
     1.5 yd³
    Width
     94.7 in
    Weight
     1241 lb
  • 3.25m³ (4.25yd³) - Buckets - Loader
    Capacity
     4.25 yd³
    Width
     115 in
    Weight
     3047 lb
  • LT118 - Tillers
    Length
     37.6 in
    Height
     29.7 in
    Overall Width
     89.4 in
  • DG275 GC (3 phase) - Electric Power
    Fuel Type
     Natural Gas
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • 6m³ (7.8yd³) Standard Rock - Buckets - Mining Shovels

     -

    -
  • 14.8 m³ (19.4 yd³) - Blades
    Capacity
     19.4 yd³
    Width
     193 in
  • 1576 mm (62 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.56 ft³
    Width
     62 in
    Weight
     529.1 lb
  • QH342/HS

     -

    -
  • QE342/e

     -

    -
  • 1.15 m3 (1.5 yd3), Pin On, Bolt-On Teeth - Buckets - Backhoe Front
    Capacity
     1.5 yd³
    Width
     94.7 in
    Weight
     1112.2 lb
  • C18 Sound Attenuated Enclosure 50 and 60 Hz - Generator Set Enclosures

     -

    -
  • S3070 Rotating Scrap & Demolition Shear - Shears
    Length
     193 in
    Height
     66 in
    Width
     46 in
  • M 32 E - Marine Power Systems
    Maximum Rating
     5747 kWe (5940 kVA)
    Minimum Rating
     3165 kWe (3960 kVA)
  • 2.44 m (8 ft) - Snow Pushes
    Weight
     390.2 lb
    Overall Height
     16 in
    Working Width
     96 in
  • 3.2 m3 (4.2 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     4.2 yd³
    Width
     108.1 in
    Weight
     2841.8 lb
  • TH417D - Telehandlers
    Maximum Lift Height
     55.8 ft
    Operating Weight - With Carriage and Forks
     22256 lb
    Rated Load Capacity
     8818 lb
  • 930M Aggregate Handler - Wheel Loaders
    Rated Net Power
     157 HP
    Operating Weight
     31144 lb
    Bucket Capacities
     2.5-2.7 m3 (3.3-3.5 yd3)
  • 160 / 160 AWD - Motor Graders
    Base Power (1st Gear) - Net
     221 HP
    Operating Weight - Typically Equipped
     45547 lb
    Blade Width
     14 ft
  • 2 m3 (2.6 yd3) - Buckets - Telehandler
    Rated Bucket Capacity
     2.6 yd³
    Width
     98 in
    Bucket Weight
     1007 lb
  • 289D - Compact Track and Multi Terrain Loaders
    Gross Power
     74.3 HP
    Operating Weight
     10533 lb
  • 301.8 - Excavators
    Gross Power - ISO 14396
     21.6 HP
    Operating Weight
     4473 lb
  • UNINTERRUPTIBLE POWER SUPPLY (UPS) BATTERIES

     -

    -
  • Pin Grabber Coupler (B-Linkage): 455-3909 - Couplers - Excavator
    Weight
     837 lb
    Width - Machine Interface
     20.2 in
    Lifting Eye Working Load Limit
     22046 ton (US)
  • 988K Millyard Arrangement - Wheel Loaders
    Net Power
     541 HP
    Operating Weight
     139920 lb
  • 6.4m³ (8.33yd³) - Buckets - Loader
    Capacity
     8.33 yd³
    Width
     157 in
    Weight
     16826 lb
  • 12m³ (15.7yd³) Standard Rock - Buckets - Mining Shovels

     -

    -
  • 657 - Wheel Tractor-Scrapers
    Flywheel Power - Tractor/Scraper
     469kW (629 hp) / 353 kW (473 hp)
    Scraper Capacity - Heaped
     44 yd³
    Top Speed - Loaded
     33 mile/h
  • 770G - Off-Highway Trucks
    Gross Power - SAE J1995
     515 HP
    Nominal Payload Class (100%)
     42.1 ton (US)
    Top Speed - Loaded
     45.8 mile/h
  • 2.5 m3 (3.3 yd3), Fusion™, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     3.2 yd³
    Width
     108.1 in
    Weight
     2533.1 lb
  • DG100-2 (3 Phase) - Electric Power
    Fuel System
     Natural Gas, LP Vapor
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • 305E2 CR - Excavators
    Gross Power - ISO 14396
     41.8 HP
    Operating Weight
     11443 lb
  • C4.4 - Industrial
    Maximum Power
     108.6 HP
    Rated Speed
     2200 rpm
    Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     465 kg (1025 lb)
  • MH3022 - Material Handlers
    Maximum Net Power - SAE J1349/ISO 9249
     126 kW (169 hp [171 hp/PS*])
    Operating Weight
     21 815-22 930 kg (48,094-50,552 lb)
    Maximum Reach
     33.92 ft
  • 3516B DGB™ (50 Hz) - Electric Power
    Minimum Rating
     1750 kVA
    Maximum Rating
     2275 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption
  • 3516E (50 Hz) - Electric Power
    Minimum Rating
     3000 kVA
    Maximum Rating
     3500 kVA
    Emissions/Fuel Strategy
     U.S. EPA Cert. Tier 2 / Low NOx
  • 1370 mm (54 in) - Fork Accessories

     -

    -
  • SG36 - Stump Grinders
    Overall Length
     68.4 in
    Overall Height
     32 in
    Overall Width
     46.3 in
  • 800 mm (32 in) - Buckets - Excavator
    Capacity
     42.5 l
    Width
     31.5 in
    Weight
     89.3 lb
  • 926M - Wheel Loaders
    Rated Net Power
     148 HP
    Operating Weight
     28193 lb
    Bucket Capacities
     1.9-5.0 m³ (2.5-6.5 yd³)
  • 914 mm (36 in) - Fork Accessories

     -

    -
  • Retrieval Winch - Winches
    Weight
     1350 lb
    Maximum Line Pull - Full Drum
     32150 lb
    Maximum Line Speed - Full Drum
     50 ft/min
  • 2036 mm (80 in) w/Spill Guard, Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.52 yd³
    Width
     80.2 in
    Weight
     1016.3 lb
  • 908M Ag Handler - Wheel Loaders
    Rated Net Power - 2,500 rpm - SAE J1349
     68 HP
    Operating Weight
     14402 lb
    Bucket Capacities
     0.9-1.5 m3 (1.2-2.0 yd3)
  • C9 - Industrial
    Maximum Power
     350 HP
    Rated Speed
     1800-2200 rpm
    Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     1490 kg (3285 lb)
  • G3516H - Electric Power
    Fuel System
     Natural Gas
    Frequency
     50 / 60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Stationary Emergency Certified
  • C2.2 - Industrial
    Maximum Power
     74 HP
    Rated Speed
     2800 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     242 kg (533.5 lbs)
  • D5K2 Tier 4 Final/Stage IV - Dozers
    Power - Net
     104 HP
    Operating Weight - XL
     20313 lb
  • 300 mm (12 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     3.4 ft³
    Width
     11.8 in
    Weight
     249.1 lb
  • 4121mm (162in) Mat'l Handling Arm, Fusion™ - Material Handling
    Maximum Load Rating
     19000 lb
    Retracted Length
     99 in
    Extended Length
     162 in
  • 272D3 - Skid Steer Loaders
    Gross Power - SAE J1995
     98 HP
    Operating Weight
     9133 lb
    Rated Operating Capacity
     3450 lb
  • AD30 - Underground - Hard Rock
    Gross Power - SAE J1995
     409 HP
    Loaded
     132277 lb
    Nominal Payload Capacity
     66139 lb
  • G3512/G3512B - Industrial
    Maximum Power
     1035 HP

    -
    Weight - Net Dry
     4950 kg (10913 lb)
  • 966M XE - Wheel Loaders
    Maximum Net Power - 1,600 rpm - ISO 9249
     298 HP
    Operating Weight
     51176 lb
    Bucket Capacities
     3.20-7.40 m³ (4.19-9.68 yd³)
  • 1829 mm (72 in) - Forks
    Width
     72 in
    Height - Grapples Closed
     30.3 in
    Jaw Opening
     34.5 in
  • 444F2 - Backhoe Loaders
    Power - Net
     95.2 HP
    Operating Weight - Nominal
     21178 lb
    Operating Weight - Maximum
     25353 lb
  • 0.37 m3 (0.48 yd3) - Buckets - Telehandler
    Rated Bucket Capacity
     0.48 yd³
    Width
     72 in
    Bucket Weight
     829 lb
  • PA40 - Winches
    Weight
     1345 lb
    Maximum Line Pull - Full Drum
     40000 lb
    Maximum Line Speed - Full Drum
     131 ft/min
  • 994K - Wheel Loaders
    Net Power
     1739 HP
    Operating Weight
     534852 lb
    Bucket Capacities
     19.1-43.6 m3 (25-57 yd3)
  • G317 GC Demolition & Sorting Grapple: 587-8721 - Grapples
    Capacity
     0.72 yd³
    Weight - Including Bracket
     3080 lb
  • C4.4 - Marine Power Systems
    Maximum Rating
     99.0 ekW (123 kVA)
    Minimum Rating
     36.0R ekW (45 kVA)
    Frequency
     50 Hz or 60 Hz
  • G318 WH Demolition & Sorting Grapple: 587-8976 - Grapples
    Capacity
     1.44 yd³
    Weight
     3569 lb
  • 299D2 XHP - Compact Track and Multi Terrain Loaders
    Gross Power - SAE J1995
     110 HP
    Operating Weight
     11608 lb
  • 1576 mm (62 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.47 yd³
    Width
     62 in
    Weight
     440.9 lb
  • 2.3m³ (3yd³) - Buckets - Loader
    Capacity
     3 yd³
    Width
     106 in
    Weight
     1802 lb
  • M 43 C - Marine Power Systems
    Maximum Rating
     9063 kWe (11340 kVA)
    Minimum Rating
     5754 kWe (7200 kVA)
  • CS44B - Compactors
    Gross Power
     100.6 HP
    Operating Weight - With Cab
     15895 lb
    Compaction Width
     66 in
  • 1370 mm (54 in) - Fork Accessories

     -

    -
  • C18 (50 Hz) - Electric Power
    Minimum Rating
     706 kVA
    Maximum Rating
     850 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption, U.S. EPA Certified for Stationary Emergency Use Only (Tier 2 Nonroad Equivalent Emission Standards), China Nonroad III Emission Standards
  • C1.7 - Industrial
    Maximum Power
     40.2 HP
    Rated Speed
     2800 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     190 kg (419 lbs)
  • C9 ACERT SA and WP Enclosure 180- 300 60 Hz US sourced - Generator Set Enclosures

     -

    -
  • 1.03 m3 (1.35 yd3) Pin On - Buckets - Backhoe Front
    Capacity
     1.29 yd³
    Width
     94.7 in
    Weight
     1593 lb
  • CAT® HEAVY DUTY

     -

    -
  • CW16 9-Wheel - Compactors
    Gross Power
     100.5 HP
    Operating Weight - 9 Wheel Base Machine
     11464 lb
    9 Wheel Compaction Width - With Radial Tire
     68 in
  • G332 Demolition & Sorting Grapple: 587-8991 - Grapples
    Capacity
     1.11 yd³
    Weight
     4570 lb
  • CG132B-12 - Electric Power
    Fuel Type
     Natural Gas, Biogas
    Frequency
     50 / 60 Hz
  • 301.7D CR - Excavators
    Gross Power - ISO 14396
     24.3 HP
    Operating Weight
     3726 lb
  • 1.6 m3 (2.1 yd3), Fusion™ Coupler, Bolt-On Teeth - Buckets - Compact Wheel Loader
    Rated Capacity
     2.2 yd³
    Width
     95.9 in
    Weight
     1426.4 lb
  • D7E - Dozers
    Flywheel Power
     238 HP
    Operating Weight
     57441 lb
  • C32 Tier 4 / IMO III - Marine Power Systems

     -
    Rated Engine Speed
     1600-2150 rpm
    Emissions
     U.S. EPA Tier 4 Final certified IMO III emissions certified (SCR required)
  • 3608 (50 Hz) - Electric Power
    Minimum Rating
     2363 kVA
    Maximum Rating
     3575 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption
  • C280 - Marine Power Systems
    Maximum Rating
     7268 BHP
    Minimum Rating
     2320 BHP
    Aspiration
     TA
  • 20m³ (26.2yd³) Heavy Rock - Buckets - Mining Shovels

     -

    -
  • D2 - Dozers
    Power - Net
     92 HP
    Operating Weight
     18382 lb
  • 3.25m³ (4.25yd³) - Buckets - Loader
    Capacity
     4.25 yd³
    Width
     117 in
    Weight
     3611 lb
  • 1220 mm (48 in) - Fork Accessories

     -

    -
  • PR172 Manual Angle - Rakes
    Overall Width
     81 in
    Weight
     899.5 lb
    Overall Length
     64 in
  • 2.8m³ (3.6yd³) - Buckets - Loader
    Capacity
     3.6 yd³
    Width
     106 in
    Weight
     3688 lb
  • 4.2m³ (5.5yd³) Performance Series - Buckets - Loader
    Capacity
     5.5 yd³
    Width
     126 in
    Weight
     4888 lb
  • 1120 mm (44 in) - Fork Accessories

     -

    -
  • 336 - Excavators
    Engine Power - ISO 9249
     311 HP
    Operating Weight
     81900 lb
  • S3015 Rotating Scrap & Demolition Shear - Shears
    Length
     105 in
    Height
     36.2 in
    Width
     25.2 in
  • 10m³ (13yd³) Performance Series - Buckets - Loader
    Capacity
     13 yd³
    Width
     182 in
    Weight
     16528 lb
  • 1883 mm (74 in), Bolt-On Teeth - Buckets - Skid Steer Loader
    Capacity
     0.58 yd³
    Width
     74.1 in
    Weight
     549 lb
  • General Duty Bucket 1300 mm (51 in): 550-9670 - Buckets - Excavator
    Capacity
     1.7 yd³
    Width
     51 in
    Weight
     1709 lb
  • 6.4m³ (8.3yd³) Performance Series - Buckets - Loader
    Capacity
     8.3 yd³
    Width
     158 in
    Weight
     10759 lb
  • C1.1 - Industrial
    Maximum Power
     28.2 HP
    Rated Speed
     2200-3400 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     87 kg (191 lb)
  • 3516E (50 Hz) - Electric Power
    Minimum Rating
     3000 kVA
    Maximum Rating
     3500 kVA
    Emissions/Fuel Strategy
     Tier 2 Equivalent, US EPA Stationary Emergency / Low NOx (1/2 TA Luft)
  • 793F - Off-Highway Trucks
    Gross Power - SAE J1995
     2650 HP

    -
    Top Speed - Loaded
     37.3 mile/h
  • 7m (9.2yd) Standard Rock - Buckets - Mining Shovels

     -

    -
  • 3.05 m (10 ft) - Snow Pushes
    Weight
     425.1 lb
    Overall Height
     16 in
    Working Width
     120 in
  • 7.7m³ (10yd³) - Buckets - Loader
    Capacity
     10 yd³
    Width
     157 in
    Weight
     9812 lb
  • 1676 mm (66 in) - Forks
    Width
     66 in
    Height
     22.9 in
    Weight
     436.5 lb
  • M320F (2017) - Excavators

     -
    Operating Weight*
     18 750 to 20 650 kg (41,337 to 45,525 lb)
  • 3412C - Industrial
    Maximum Power
     739 HP
    Rated Speed
     1750-2100 rpm
    Weight - Approximate, Net Dry (Basic Operating Engine Without Optional Attachments)
     2579 kg (5686 lb)
  • C15 - Industrial
    Maximum Power
     580 HP
    Rated Speed
     1800-2100 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     3673 lb
  • 2.44 m (8 ft) - Snow Pushes
    Weight
     350.1 lb
    Overall Height
     16 in
    Working Width
     96 in
  • 5.2m³ (6.75yd³) Performance Series - Buckets - Loader
    Capacity
     6.75 yd³
    Width
     126 in
    Weight
     5267 lb
  • 3.8 m3 (5.0 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     5 yd³
    Width
     108.1 in
    Weight
     3062.2 lb
  • DE55 GC (50 Hz) - Electric Power
    Minimum Rating
     55.0 kVA
    Maximum Rating
     55.0 kVA
    Emissions/Fuel Strategy
     Non Regulated
  • D6 - Dozers
    Power - Net
     215 HP
    Operating Weight
     50733 lb
  • PM312 Track Undercarriage - Cold Planers
    Rated Power
     336.6 HP
    Operating Weight
     48429 lb
    Milling Width
     48.2 in
  • CW-30 - Couplers - Excavator
    Weight
     462 lb
    Width
     22 in
    Load Rating, Hoisting Hook
     11 ton (US)
  • 3.05 m (10 ft) - Snow Pushes
    Weight
     1201.5 lb
    Overall Height
     39.1 in
    Working Width
     120 in
  • M 20 C - Marine Power Systems
    Power Range
     1020-1800 kW
    Speed Range
     900-1000 rpm
    Emissions
     IMO II / IMO III with SCR
  • HF221 - Felling Heads

     -

    -
  • 428 - Backhoe Loaders
    Power - Net
     70 HP
    Operating Weight - Nominal
     17926 lb
    Operating Weight - Maximum
     24251 lb
  • 914 mm (36 in), Pin On - Buckets - Backhoe Rear
    Capacity
     13.4 ft³
    Width
     36 in
    Weight
     471.8 lb
  • 910 - Wheel Loaders
    Rated Net Power - ISO 9249
     98 HP
    Operating Weight
     18102 lb
    Bucket Capacities
     1.3-1.9 m3 (1.7-2.5 yd3)
  • 7m³ (9.2yd³) Standard Rock - Buckets - Mining Shovels

     -

    -
  • 1600 mm (63 in) - Buckets - Excavator
    Capacity
     9.9 ft³
    Width
     63 in
    Weight
     306.7 lb
  • 950M - Wheel Loaders
    Maximum Net Power - 2,100 rpm - ISO 9249
     230 HP
    Operating Weight
     42357 lb
    Bucket Capacities
     2.5-9.2 m³ (3.3-12.0 yd³)
  • WP and SAE D40-6 to D200-2 US - Generator Set Enclosures

     -

    -
  • 918M - Wheel Loaders
    Net Power
     113 HP
    Operating Weight
     21082 lb
    Bucket Capacities
     1.3-1.9 m³ (1.7-2.5 yd³)
  • 993K - Wheel Loaders
    Net Power
     973 HP
    Operating Weight
     294687 lb
    Bucket Capacities
     12.2-23.7 m3 (16.0-31.0 yd3)
  • DLK426 - Delimbers

     -

    -
  • 21.41 m³ (28.0 yd³) - Blades
    Capacity
     28 yd³
    Width
     218 in
  • 1219 mm (48 in) - Forks
    Fork Tine Width
     4 in
    Fork Tine Thickness
     2.36 in
    Fork Tine Length
     48 in
  • 6.5m³ (8.5yd³) Coal Seam - Buckets - Loader
    Capacity
     8.5 yd³
    Width
     150 in
    Weight
     9790 lb
  • 1219 mm (48 in) - Fork Accessories

     -

    -
  • AP655F Steel Track - Asphalt Pavers
    Gross Power
     205 HP
    Operating Weight - SE60 V Screed only
     7495 lb
    Standard Paving Range - SE60 V, SE60 V XW, SE60 VT XW
     3.0-6.0 m (9' 10" - 19' 6")
  • 302.7D CR - Excavators
    Gross Power
     24.3 HP
    Operating Weight
     6239 lb
  • 700 mm (28 in) - Buckets - Excavator
    Capacity
     3.2 ft³
    Width
     27.6 in
    Weight
     156.3 lb
  • 6.4m³ (8.3yd³) Performance Series - Buckets - Loader
    Capacity - Adapters
     8.3 yd³
    Width
     161 in
    Weight
     14021 lb
  • 1627mm (64in) Ripper - Rippers
    Overall Length
     82.9 in
    Weight
     3782 lb
    Width
     34.8 in
  • RM500B - Road Reclaimers
    Gross Power
     546 HP
    Maximum Operating Weight
     62611 lb
    Cutting/Mixing Width
     96 in
  • 1.15 m3 (1.5 yd3), Pin On - Buckets - Backhoe Front
    Capacity
     1.5 yd³
    Width
     94.7 in
    Weight
     1056 lb
  • 986K Block Handler Arrangement - Wheel Loaders
    Net Power
     373 HP
    Operating Weight
     116688 lb
    Bucket Capacities
     5.4 m³ (7 yd³)
  • 352F LRE - Excavators
    Gross Power - SAE J1995
     322 kW (438 PS)
    Operating Weight
     130955 lb
  • C0.7 - Industrial
    Maximum Power
     20.5 HP
    Rated Speed
     2800-3600 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     71 kg (156.5 lb)
  • CD8 - Solid Drum - Compactors
    Gross Power
     100 HP
    Operating Weight
     16314 lb
    Standard Compaction Width
     59 in
  • 1.14 m3 (1.5 yd3), IT Coupler, Bolt-On Cutting Edge - Buckets - Backhoe Front
    Capacity
     1.5 yd³
    Width
     94.7 in
    Weight
     1184.1 lb
  • MP324 Concrete Cutter Jaw - Multi-Processors
    Length
     84 in
    Height
     59 in
    Width
     31 in
  • 340F - Excavators
    Engine Power - ISO 9249
     306 HP
    Operating Weight
     94358 lb
  • M314F - Excavators

     -
    Operating Weight*
     14 360 to 15 950 kg (31,658 to 35,164 lb)
  • HFW232 - Felling Heads

     -

    -
  • QA335

     -

    -
  • C3.6 for Tractors - Industrial
    Maximum Power
     121 HP
    Rated Speed
     2200-2400 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     840 lb
  • 3.6m³ (4.75yd³) Performance Series - Buckets - Loader
    Capacity
     4.75 yd³
    Width
     128 in
    Weight
     4480 lb
  • 2.3m³ (3yd³) - Buckets - Loader
    Capacity
     3 yd³
    Width
     100 in
    Weight
     3160 lb
  • 9m³ (11.8yd³) Iron Ore - Buckets - Loader
    Capacity
     11.8 yd³
    Width
     193 in
    Weight
     24577 lb
  • 3512E Tier 4 / IMO III - Marine Power Systems
    Power Range
     1341-2549 bhp (1000-1901 bkW)
    Speed Range
     1600-1800 rpm
    Emissions
     U.S. EPA Tier 4 Final, IMO III
  • 1550 mm (61 in) - Fork Accessories

     -

    -
  • 2337 mm (92 in) - Blades
    Overall Width
     92 in
    Length
     40.5 in
  • 406 mm (16 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     4.2 ft³
    Width
     16 in
    Weight
     297.6 lb
  • CG132B-16 - Electric Power
    Fuel Type
     Natural Gas, Biogas
    Frequency
     50 / 60 Hz
  • MP318 Universal Jaw - Multi-Processors
    Length
     79 in
    Height
     50 in
    Width
     31 in
  • C9.3B - Industrial
    Maximum Power
     416 HP
    Rated Speed
     1800-2200 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     1907 lb
  • 3.0 m3 (3.9 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     3.9 yd³
    Width
     99.5 in
    Weight
     3833.8 lb
  • 2.7m³ (3.5yd³) Performance Series - Buckets - Loader
    Capacity
     3.5 yd³
    Width
     114 in
    Weight
     3296 lb
  • T109 Hydraulic Side Shift - Trenchers
    Overall Length
     92.4 in
    Overall Height
     30.9 in
    Overall Width
     56.1 in
  • C13 - Industrial
    Maximum Power
     440 HP
    Rated Speed
     1800-2100
    Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     1692 kg (3730 lb)
  • 3516E (50 Hz) - Electric Power
    Minimum Rating
     2750 kVA
    Maximum Rating
     3000 kVA (3100 kVA without fan)
    Emissions/Fuel Strategy
     Low Fuel Consumption
  • 1800mm (71in) Ripper - Rippers
    Overall Length
     90 in
    Weight
     4227 lb
    Width
     35.1 in
  • 1524 mm (60 in) - Fork Accessories

     -

    -
  • 1300 mm (51 in) - Buckets - Excavator
    Capacity
     220.3 l
    Width
     51.2 in
    Weight
     260.6 lb
  • 15m³ (19.5yd³) Serrated Edge - Buckets - Loader
    Capacity
     19.5 yd³
    Width
     200 in
    Weight
     30615 lb
  • 844K - Dozers
    Gross Power
     752 HP
    Operating Weight
     165089 lb
  • 1.3 m3 (1.7 yd3) - Buckets - Telehandler
    Rated Bucket Capacity
     1.7 yd³
    Width
     72 in
    Bucket Weight
     768 lb
  • 239D3 - Skid Steer Loaders
    Gross Power - SAE J1995
     67.1 HP
    Operating Weight
     7434 lb
  • QE141

     -

    -
  • CD10 Split Drum - Compactors
    Gross Power
     101.9 HP
    Operating Weight
     22311 lb
    Maximum Compaction Width
     118 in
  • 1.1 m3 (1.4 yd3), IT Coupler, Bolt-On Teeth - Buckets - Backhoe Front
    Capacity
     1.4 yd³
    Width
     95.5 in
    Weight
     1716.1 lb
  • R2900 - Underground - Hard Rock
    Gross Power - ISO 14396
     409 HP

    -
    Nominal Payload Capacity
     37920 lb
  • 416D Backhoe Loaders Tilting - Couplers - Backhoe Rear
    Weight
     242.3 lb
    Coupler Class
     1/4 yd
  • 1 m3 (1.3 yd3) - Buckets - Telehandler
    Rated Bucket Capacity
     1.3 yd³
    Width
     95 in
    Bucket Weight
     1687 lb
  • CB34B - Compactors
    Gross Power
     49.1 HP
    Operating Weight
     8157 lb
    Standard Compaction Width
     51 in
  • 12m³ (15.7yd³) Iron Ore - Buckets - Mining Shovels

     -

    -
  • 1.14 m3 (1.5 yd3) Pin On - Buckets - Backhoe Front
    Capacity
     1.5 yd³
    Width
     95.5 in
    Weight
     2104.9 lb
  • 4m³ (5.25yd³) - Buckets - Loader
    Capacity
     5.25 yd³
    Width
     120 in
    Weight
     2835 lb
  • WP and SA Enclosures D40-2LC to D60-4LC - Generator Set Enclosures

     -

    -
  • 1883 mm (74 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Width
     74.1 in
    Height - Grapples Closed
     20.7 in
    Jaw Opening
     40 in
  • 3.66 m (12 ft) - Snow Pushes
    Weight
     952.4 lb
    Overall Height
     36 in
    Working Width
     144 in
  • PM620 - Cold Planers
    Rated Power
     630 HP
    Operating Weight
     73480 lb
    Milling Width
     79.1 in
  • C15 - Industrial
    Maximum Power
     540 HP
    Rated Speed
     1800-2100 rpm
    Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     2055 kg (4531.5 lb)
  • 910M - Wheel Loaders
    Net Power
     97 HP
    Operating Weight
     17893 lb
    Bucket Capacities
     1.3 m3-1.9 m3 (1.7 yd3-2.5 yd3)
  • 3612 (50 Hz) - Electric Power
    Minimum Rating
     4400 kVA
    Maximum Rating
     4850 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption
  • 14 - Motor Graders
    Base Power (1st Gear) - Net
     238 HP
    Operating Weight - Typically Equipped
     57250 lb
    Blade Width
     14 ft
  • D5 - Dozers
    Power - Net
     170 HP
    Operating Weight
     42263 lb
  • QA451/e

     -

    -
  • 272D3 XE - Skid Steer Loaders
    Gross Power - SAE J1995
     110 HP
    Operating Weight
     9573 lb
    Rated Operating Capacity
     3700 lb
  • 5.0 m3 (6.5 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     6.5 yd³
    Width
     119.4 in
    Weight
     5573.3 lb
  • C15 - Industrial
    Maximum Power
     580 HP
    Rated Speed
     1800-2100 rpm
    Weight - Approximate, Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     2113-2650 kg (4658-5842 lb)
  • 307E2 - Excavators
    Gross Power - ISO 14396
     53.1 HP
    Operating Weight
     16028 lb
  • 406 mm (16 in) - Buckets - Excavator
    Rated Capacity
     2.7 yd³
    Width
     16 in
    Weight
     174.2 lb
  • 1524 mm (60 in), Pin On - Buckets - Backhoe Rear
    Capacity
     16.7 ft³
    Width
     60 in
    Weight
     529.1 lb
  • BA25 Manual - Brooms
    Overall Width
     106.3 in
    Sweeping Width
     98.4 in
    Brush Diameter
     27.6 in
  • A11 - Augers
    Drive Shaft Torque at Maximum Pressure
     815 lb/ft
    Drive Method
     Gerotor Motor - Direct Drive
    Mounting Bracket Design
     Mini Excavator
  • 300 mm (12 in) - Buckets - Excavator
    Capacity
     1.4 ft³
    Width
     11.8 in
    Weight
     111.3 lb
  • DE165 GC (60 Hz) - Electric Power
    Minimum Rating
     150 ekW
    Maximum Rating
     150 ekW
    Emissions/Fuel Strategy
     Non Regulated
  • 246D3 - Skid Steer Loaders
    Gross Power - SAE J1995
     74.3 HP
    Operating Weight
     7478 lb
    Rated Operating Capacity
     2200 lb
  • VM 43 C - Marine Power Systems
    Maximum Rating
     16111 kWe (20160 kVA)
    Minimum Rating
     11508 kWe (14400 kVA)
  • 2802mm (110in) - Forks
    Fork Width
     110 in
    Inside Height
     61 in
    Weight
     7020 lb
  • G324 WH Demolition & Sorting Grapple: 587-8985 - Grapples
    Capacity
     1.96 yd³
    Weight
     4418 lb
  • Cat Switchgear - Electric Power
    Configuration
     IP4X
    Modes of Operation
     Switchgear integration options for multi generator and utility synchronising, load sharing, Peak Lopping/Shaving, AMF, Changeover, Load bank connection, Protection relay etc.
    Application
     LV 380…480 VAC, 50 Hz, 3-Phase.
  • 308 CR - Excavators
    Gross Power - ISO 14396
     74.3 HP
    Operating Weight
     20678 lb
  • C32 Tier 3 / IMO II - Marine Power Systems
    Maximum Rating
     1333 BHP
    Minimum Rating
     314 BHP
    Aspiration
     Turbocharged-aftercooled aspiration
  • 2133 mm (84 in) - Bale Grabs
    Overall Width
     55.2 in
    Overall Height
     34.4 in
    Maximum Opening Width
     84 in
  • 2036 mm (80 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.58 yd³
    Width
     80.2 in
    Weight
     584.2 lb
  • 963 - Track Loaders
    Net Power - ISO 9249/SAE J1349
     202 HP
    Operating Weight
     44881 lb
    Capacity - General Purpose
     3.2 yd³
  • 8.1m (10.6)yd Heavy Duty - Buckets - Mining Shovels

     -

    -
  • BU115 - Brooms
    Overall Width
     71.3 in
    Sweeping Width
     59.4 in
    Brush Diameter
     26 in
  • C13, C15, C18 SA enclosure. 350-600 kW 60 Hz - Generator Set Enclosures

     -

    -
  • 3.66 m (12 ft) - Snow Pushes
    Weight
     2932.1 lb
    Overall Height
     44.4 in
    Working Width
     144 in
  • PR190 Hydraulic Angle - Rakes
    Overall Width
     99 in
    Weight
     1320.6 lb
    Overall Length
     64 in
  • 3516C Tier 3 - Marine Power Systems
    Power Range
     2131-2675 bhp (1590-1995 bkW)
    Speed Range
     1600 rpm
    Emissions
     EPA Tier 3, IMO II
  • 1042 mm (41 in) - Fork Accessories

     -

    -
  • C32 IMO II - Marine Power Systems
    Maximum Rating
     1333 BHP
    Minimum Rating
     791 BHP
    Aspiration
     TTA
  • 730 EJ - Articulated Trucks
    Gross Power - SAE J1995
     375 HP
    Rated Payload
     30 ton (US)
    Heaped (SAE 2:1)
     22.1 yd³
  • 406 mm (16 in) - Augers
    Diameter
     16 in
    Weight
     114.6 lb
    Overall Length
     48.1 in
  • 313F GC - Excavators

     -
    Operating Weight
     29300 lb
  • DG50-2 (3 Phase) - Electric Power
    Fuel System
     Natural Gas / LP Vapor
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • 305 mm (12 in) - Augers
    Diameter
     12 in
    Weight
     90.4 lb
    Overall Length
     48 in
  • 3 m3 (3.9 yd3) - Buckets - Telehandler
    Rated Bucket Capacity
     3.9 yd³
    Width
     106 in
    Bucket Weight
     1320 lb
  • 4.6m³ (6yd³) Quarry - Buckets - Loader
    Capacity - Adapters
     6 yd³
    Width
     138 in
    Weight
     8125 lb
  • 508 mm (20 in) - Buckets - Excavator
    Rated Capacity
     5.1 yd³
    Width
     20 in
    Weight
     240.3 lb
  • 242D3 - Skid Steer Loaders
    Gross Power - SAE J1995
     74.3 HP
    Operating Weight
     7138 lb
    Rated Operating Capacity
     2200 lb
  • A41 - Augers
    Drive Shaft Torque at Maximum Pressure
     3037.3 lb/ft
    Drive Method
     Gerotor Motor - Single Planetary Reduction
    Mounting Bracket Design
     Skid Steer Loader, Compact Wheel Loader
  • C18 (SRMP) Marine Generator Set - Marine Power Systems
    Maximum Rating
     565 ekW (706 kVA)
    Minimum Rating
     260 ekW (325 kVA)
    Frequency
     50 hz
  • 610 mm (24 in), Pin On - Buckets - Backhoe Rear
    Capacity
     6.2 ft³
    Width
     24 in
    Weight
     332.9 lb
  • MP332 Universal Jaw - Multi-Processors
    Length
     90.7 in
    Height
     73.5 in
    Width
     39.6 in
  • Severe Duty Bucket 1950 mm (77 in): 518-9337 - Buckets - Excavator
    Capacity
     4.48 yd³
    Width
     77 in
    Weight
     6625 lb
  • BH150 - Backhoes
    Maximum Digging Depth
     121 in
    Operating Weight
     2255.3 lb
    Overall Length
     109.3 in
  • M 34 DF - Marine Power Systems
    Power Range
     3060-4770 bkW
    Speed Range
     720 / 750 rpm
    Emissions
     IMO III
  • 2.5 m3 (3.3 yd3), Fusion™ Coupler - Buckets - Loader
    Capacity
     3.2 yd³
    Width
     99.2 in
    Weight
     2120.8 lb
  • 1500 mm (59 in) - Buckets - Excavator
    Rated Capacity
     18.4 yd³
    Width
     59.1 in
    Weight
     761.9 lb
  • 4.26 m (14 ft) - Snow Pushes
    Weight
     2879.2 lb
    Overall Height
     42.8 in
    Working Width
     168 in
  • 2.5m³ (3.25yd³) - Buckets - Loader
    Capacity
     3.25 yd³
    Width
     106 in
    Weight
     2101 lb
  • 432 - Backhoe Loaders
    Power - Net
     92 HP
    Operating Weight - Nominal
     18347 lb
    Operating Weight - Maximum
     24251 lb
  • DG175 GC (3 phase) - Electric Power
    Fuel System
     Carburetor, Down Draft
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • 610 mm (24 in) Extension - Auger Accessories

     -

    -
  • G312 GC Demolition & Sorting Grapple: 587-8715 - Grapples
    Capacity
     0.52 yd³
    Weight - Including Bracket
     3075.44 lb
  • 619 mm (24 in) - Buckets - Excavator
    Rated Capacity
     4.2 yd³
    Width
     24.4 in
    Weight
     216.1 lb
  • 406 mm (16 in), Pin On - Buckets - Backhoe Rear
    Capacity
     3.7 ft³
    Width
     16 in
    Weight
     280 lb
  • 938M Waste Handler - Wheel Loaders
    Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4)
     184 HP
    Operating Weight
     38555 lb
    Bucket Capacities
     3.0-5.0 m3 (3.9-6.5 yd3)
  • 3.5 m3 (4.6 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     4.5 yd³
    Width
     108.1 in
    Weight
     2894.7 lb
  • C27 - Industrial
    Maximum Power
     1050 HP
    Rated Speed
     1800 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     6625 lb
  • 301.4C - Excavators
    Gross Power
     24.3 HP
    Operating Weight
     3241 lb
  • 610 mm (24 in), Pin On - Buckets - Backhoe Rear
    Capacity
     7 ft³
    Width
     24 in
    Weight
     381.4 lb
  • 4.6m³ (6.0yd³) Heavy Rock - Buckets - Mining Shovels

     -

    -
  • 1.1 m3 (1.4 yd3) Pin On - Buckets - Backhoe Front
    Capacity
     1.4 yd³
    Width
     95.5 in
    Weight
     1655 lb
  • 1200 mm (47 in), Pin On - Buckets - Backhoe Rear
    Capacity
     14.6 ft³
    Width
     47.2 in
    Weight
     632.7 lb
  • MP345 Demolition Jaw - Multi-Processors
    Length
     93 in
    Height
     91 in
    Width
     40 in
  • 6.6m (8.6)yd Heavy Duty - Buckets - Mining Shovels

     -

    -
  • AD22 - Underground - Hard Rock
    Gross Power - SAE J1995
     325 HP
    Loaded
     97488 lb
    Nominal Payload Capacity
     48501 lb
  • 381 mm (15 in) - Augers
    Diameter
     16.5 in
    Weight
     46.9 lb
    Overall Length
     10.4 in
  • GB120 - Blades

     -

    -
  • 1220 mm (48 in) - Forks
    Fork Tine Length
     48 in
    Fork Tine Thickness
     2 in
    Fork Tine Weight
     75 lb
  • 2.5 m3 (3.3 yd3), Fusion™ Coupler - Buckets - Loader
    Capacity
     3.3 yd³
    Width
     107.4 in
    Weight
     2123 lb
  • C7.1 (50 Hz) - Electric Power
    Minimum Rating
     135 kVA
    Maximum Rating
     220 kVA
    Emissions/Fuel Strategy
     Non Regulated, EU Stage IIIA
  • 1140 mm (45 in) - Bale Spears
    Overall Width
     50.6 in
    Overall Height
     22.4 in
    Capacity
     2004 lb
  • G217 GC Demolition & Sorting Grapple: 587-8659 - Grapples
    Capacity
     0.78 yd³
    Weight
     1973 lb
  • QA331

     -

    -
  • 300.9D - Excavators
    Gross Power - ISO 14396
     18 HP
    Operating Weight - With Safety Frame
     2170 lb
  • AP355F Paver - Asphalt Pavers
    Gross Power
     74.8 HP
    Operating Weight - With SE34 V
     18850 lb
    Standard Paving Range
     1.75-3.42 m (5' 9" - 11' 2")
  • 1220 mm (48 in) - Forks
    Carriage Width
     45.8 in
    Carriage Height
     36.8 in
    Carriage Weight
     211.6 lb
  • 0.76 m3 (1 yd3) - Buckets - Telehandler
    Rated Bucket Capacity
     1 yd³
    Width
     73 in
    Bucket Weight
     710 lb
  • VM 43 C - Marine Power Systems
    Power Range
     12000 - 16800 kW
    Speed Range
     500-514 rpm
    Emissions
     IMO II
  • D8T - Dozers
    Power - Net
     354 HP
    Operating Weight
     87600 lb
  • GSH525 5-Tine, 1150-Liter Orange Peel Grapple - Grapples
    Capacity
     1.5 yd³
    Operating Weight
     NAN lb
  • MP365 Demolition Jaw - Multi-Processors
    Length
     105 in
    Height
     103 in
    Width
     43 in
  • 1883 mm (74 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.58 yd³
    Width
     74.1 in
    Weight
     597.5 lb
  • SW360B, 152 mm (6 in) - Saws
    Length
     93 in
    Overall Height
     70 in
    Overall Width
     73 in
  • 303.5E CR - Excavators
    Gross Power
     33.3 HP
    Operating Weight
     7734 lb
  • 1.0 m3 (1.3 yd3), Bolt-On Teeth - Buckets - Compact Wheel Loader
    Capacity
     1.3 yd³
    Width
     80.1 in
    Weight
     864 lb
  • C175-16 - Marine Power Systems
    Power Range
     2683-3420 bhp (2001-2550 bkW)
    Speed Range
     1600-1800 rpm
    Emissions
     IMO II
  • 4.2 m3 (5.5 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     5.5 yd³
    Width
     108.1 in
    Weight
     3170.2 lb
  • 1.6 m3 (2.1 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
     2.2 yd³
    Width
     94.5 in
    Weight
     1342 lb
  • 309 CR VAB - Excavators
    Gross Power - ISO 14396
     74.3 HP
    Operating Weight
     20731 lb
  • G212 GC Demolition & Sorting Grapple: 587-8639 - Grapples
    Capacity
     0.52 yd³
    Weight
     1413 lb
  • 381 mm (15 in) - Augers
    Diameter
     15 in
    Weight
     111.1 lb
    Overall Length
     50.7 in
  • 725 - Articulated Trucks
    Gross Power - SAE J1995
     342 HP
    Rated Payload
     26.5 ton (US)
    Heaped (SAE 2:1)
     19.6 yd³
  • 305.5E2 CR with Swing Boom - Excavators
    Gross Power - ISO 14396
     45.7 HP
    Operating Weight
     11958 lb
  • 259D3 - Skid Steer Loaders
    Gross Power - SAE J1995
     74.3 HP
    Operating Weight
     8987 lb
  • C175-20 (50 Hz) - Electric Power
    Minimum Rating
     3150 kVA
    Maximum Rating
     4000 kVA
    Emissions/Fuel Strategy
     Low Fuel, Low Emissions
  • G3516A - Electric Power
    Fuel Type
     Natural Gas, Biogas, Coal Gas
    Frequency
     50 / 60 Hz
  • 1.9 m3 (2.5 yd3), Pin On - Buckets - Loader
    Capacity
     2.5 yd³
    Width
     99.5 in
    Weight
     1787.9 lb
  • 1566 mm (62 in) - Fork Accessories

     -

    -
  • 2.5m³ (3.25yd³) - Buckets - Loader
    Capacity
     3.25 yd³
    Width
     106 in
    Weight
     3494 lb
  • 7.8 m³ (10.3 yd³) - Blades
    Capacity
     10.3 yd³
    Width
     177 in
  • 1.1 m3 (1.4 yd3), Bolt-On Teeth - Buckets - Compact Wheel Loader
    Capacity
     1.4 yd³
    Width
     81.1 in
    Weight
     924 lb
  • MP332 Shear Jaw - Multi-Processors
    Length
     2146 in
    Height
     1615 in
    Width
     1005 in
  • UD550E

     -

    -
  • 52.0 m³ (68.0 yd³) - Blades
    Capacity
     68 yd³
    Width
     265 in
  • G313 GC Demolition & Sorting Grapple: 587-8719 - Grapples
    Capacity
     0.59 yd³
    Weight - Including Bracket
     4343.1 lb
  • 352 UHD - Excavators

     -
    Operating Weight
     151483 lb
  • G3520C - Electric Power
    Fuel Type
     Natural Gas, Biogas, Coal Gas
    Frequency
     50 / 60 Hz
  • ATC Power Breaker Bypass Isolation Open/Closed Transition ATS - Electric Power
    Rating Range
     200-5000A
    Transfer Type
     Bypass isolation, Closed transition
    Switch Type
     Power Breaker
  • 5.8m (7.6)yd Extreme Duty - Buckets - Mining Shovels

     -

    -
  • UJ640E

     -

    -
  • 3.2m³ (4.25yd³) - Buckets - Loader
    Capacity
     4.25 yd³
    Width
     115 in
    Weight
     2775 lb
  • US440E

     -

    -
  • CW-70 - Couplers - Excavator
    Weight
     2750 lb
    Width
     33.6 in
    Load Rating, Hoisting Hook
     22 ton (US)
  • 825K - Compactors
    Gross Power
     435 HP
    Operating Weight
     78326 lb
  • CS64B - Compactors
    Gross Power
     131 HP
    Operating Weight - With Cab
     26569 lb
    Compaction Width
     84 in
  • 330F L (2017) - Excavators

     -
    Operating Weight
     67748 lb
  • 457 mm (18 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     4.9 ft³
    Width
     18 in
    Weight
     304.2 lb
  • 2.44 m (8 ft) - Snow Pushes
    Weight
     1036.2 lb
    Overall Height
     39.1 in
    Working Width
     96 in
  • 3.66 m (12 ft) - Snow Pushes
    Weight
     4111.6 lb
    Overall Height
     38.4 in
    Working Width
     144 in
  • 300 mm (12 in) - Buckets - Excavator
    Capacity
     1.21 ft³
    Width
     11.8 in
    Weight
     100.5 lb
  • 4 m (13 ft) Truss Boom - Material Handling

     -

    -
  • 1.1 m3 (1.4 yd3), IT Coupler, Bolt-On Cutting Edge - Buckets - Backhoe Front
    Capacity
     1.4 yd³
    Width
     95.5 in
    Weight
     1748 lb
  • C32 ACERT Tier 3 - Marine Power Systems
    Maximum Rating
     940 ekW (1175 kVA)
    Minimum Rating
     730 ekW (913 kVA)
    Frequency
     60hz
  • 0.8 m3 (1.0 yd3), Bolt-On Teeth - Buckets - Compact Wheel Loader
    Capacity
     1 yd³
    Width
     74.4 in
    Weight
     1131 lb
  • CVP16 - Compactors
    Impulse Force
     3641.91 lb

    -
    Base Plate Width
     12 in
  • 3.4m³ (4.5yd³) - Buckets - Loader
    Capacity
     4.5 yd³
    Width
     114 in
    Weight
     3020 lb
  • GCM34 - Electric Power
    Fuel Type
     Natural Gas
    Frequency At Speed
     50 Hz @ 750/ 60 Hz @ 720
  • D7 - Dozers
    Power - Net
     265 HP
    Operating Weight
     65644 lb
  • 4.87 m (16 ft) - Snow Pushes
    Weight
     3276.1 lb
    Overall Height
     42.8 in
    Working Width
     192 in
  • C13 Sound Attenuated Enclosure 50 and 60 Hz - Generator Set Enclosures

     -

    -
  • 1.6 m3 (2.1 yd3), Weld-On Teeth - Buckets - Compact Wheel Loader
    Rated Capacity
     2.1 yd³
    Width
     95.8 in
    Weight
     1377.9 lb
  • 1.4 m3 (1.8 yd3), IT Coupler, Bolt-On Teeth - Buckets - Compact Wheel Loader
    Rated Capacity
     2.1 yd³
    Width
     95.6 in
    Weight
     1173.1 lb
  • 631K - Wheel Tractor-Scrapers
    Flywheel Power - Tractor/Scraper
     570 HP
    Scraper Capacity - Heaped
     34 yd³
    Top Speed - Loaded
     34.7 mile/h
  • G3520/G3520B - Industrial
    Maximum Power
     1725 HP

    -
    Weight - Net Dry
     11168 kg (24622 lb)
  • 0.75 m3 (1.0 yd3), Pin On - Buckets - Backhoe Front
    Capacity
     0.99 yd³
    Width
     89.1 in
    Weight
     776 lb
  • PR184 Manual Angle - Rakes
    Overall Width
     93 in
    Weight
     1025.1 lb
    Overall Length
     64 in
  • H130 GC S - Hammers
    Impact Energy Class
     4425 ft-lb
    Blows per Minute
     350-700
    Maximum Operating Weight
     5471.4 lb
  • 120 / 120 AWD - Motor Graders
    Net Power Range (Tier 4)
     139 HP

    -
    Blade Width
     12 ft
  • US550E

     -

    -
  • ADVANTAGES OF A REMANUFACTURED PART

     -

    -
  • 921 mm (36 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     17.6 ft³
    Width
     36.3 in
    Weight
     859.8 lb
  • CB2.9 - Compactors
    Gross Power
     30.7 HP
    Operating Weight
     5952 lb
    Standard Compaction Width
     51 in
  • G318 Demolition & Sorting Grapple: 595-1393 - Grapples
    Capacity
     0.78 yd³
    Weight
     2917 lb
  • CD10 Solid Drum - Compactors
    Gross Power
     101.9 HP
    Operating Weight
     19908 lb
    Maximum Compaction Width
     118 in
  • A41 - Augers
    Drive Shaft Torque at Maximum Pressure
     3038.8 lb/ft
    Drive Method
     Gerotor Motor - Single Planetary Reduction
    Mounting Bracket Design
     Mini Excavator
  • 400 mm (16 in) - Buckets - Excavator
    Capacity
     1.9 ft³
    Width
     15.7 in
    Weight
     121.3 lb
  • Pumps & Motors

     -

    -
  • B9 - Hammers

     -

    -
  • 1.0 m3 (1.3 yd3) Pin On - Buckets - Backhoe Front
    Capacity
     1.29 yd³
    Width
     89.1 in
    Weight
     1957.9 lb
  • 305 mm (12 in), Pin On - Buckets - Backhoe Rear
    Capacity
     2.5 ft³
    Width
     12 in
    Weight
     249.1 lb
  • 457 mm (18 in), Pin On - Buckets - Backhoe Rear
    Capacity
     4.6 ft³
    Width
     18 in
    Weight
     304.2 lb
  • P225 - Pulverizers
    Capacity - Concrete Thickness
     29.5 in
    Width
     24.6 in
    Weight
     5467 lb
  • 616 mm (24 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     10.8 ft³
    Width
     24.3 in
    Weight
     663.6 lb
  • C9 275-330 kVA ACERT - Generator Set Enclosures

     -

    -
  • 3.1m³ (4yd³) - Buckets - Loader
    Capacity
     4 yd³
    Width
     106 in
    Weight
     2465 lb
  • CAT® GENERAL DUTY

     -

    -
  • MP318 Pulverizer Jaw - Multi-Processors

     -

    -
  • 4m³ (5.25yd³) Performance Series - Buckets - Loader
    Capacity
     5.25 yd³
    Width
     128 in
    Weight
     5284 lb
  • 457 mm (18 in), Pin On - Buckets - Backhoe Rear
    Capacity
     4.2 ft³
    Width
     18 in
    Weight
     284.4 lb
  • 1.0 m3 (1.3 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     1.3 yd³
    Width
     74.4 in
    Weight
     862 lb
  • 1000 mm (39 in) - Buckets - Excavator
    Capacity
     4.8 ft³
    Width
     39.4 in
    Weight
     240.1 lb
  • T109 Manual Side Shift - Trenchers
    Overall Length
     92.4 in
    Overall Height
     30.9 in
    Overall Width
     56.1 in
  • C18 IMO II - Marine Power Systems
    Maximum Rating
     660 BHP
    Minimum Rating
     404 BHP
    Aspiration
     TA, TTA
  • PM820 - Cold Planers
    Rated Power
     800.6 HP
    Operating Weight
     79653 lb
    Milling Width
     79.1 in
  • C15 Sound Attenuated Enclosure 50 and 60 Hz - Generator Set Enclosures

     -

    -
  • DG300 GC (3 phase) - Electric Power
    Fuel Type
     Natural Gas
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • CW-10 - Couplers - Excavator
    Weight
     143 lb
    Width
     12.4 in
    Load Rating, Hoisting Hook
     4.4 ton (US)
  • 3.4m³ (4.5yd³) - Buckets - Loader
    Capacity
     4.5 yd³
    Width
     106 in
    Weight
     2381 lb
  • M 46 DF - Marine Power Systems
    Maximum Rating
     8329 kWe (10422 kVA)
    Minimum Rating
     5179 kWe (6480 kVA)
  • G217 GC Demolition & Sorting Grapple: 587-8657 - Grapples
    Capacity
     1.18 yd³
    Weight - Including Bracket
     5224.95 lb
  • 3.8 m3 (5.0 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     5 yd³
    Width
     108.1 in
    Weight
     3024.7 lb
  • 762 mm (30 in), Pin On - Buckets - Backhoe Rear
    Capacity
     9.5 ft³
    Width
     30 in
    Weight
     396.8 lb
  • 307.5 - Excavators
    Gross Power - ISO 14396
     57.9 HP
    Operating Weight
     17905 lb
  • 1.0 m3 (1.3 yd3), Pin On - Buckets - Backhoe Front
    Capacity
     1.29 yd³
    Width
     94.7 in
    Weight
     988.1 lb
  • Cat XLM Switchgear - Electric Power
    Configuration
     Configurable PLC based switchgear capable of controlling and monitoring multiple generator sets, tie, utility and load breakers for utility paralleling applications
    Modes of Operation
     Emergency Standby, Utility Import/Export, Peak shaving, and base load operations with redundant controls and components. Closed transition to/from generator power
    Application
     LV and MV ( 208V - 38 kV
  • 4.4m³ (5.75yd³) Iron Ore - Buckets - Loader
    Capacity
     5.75 yd³
    Width
     155 in
    Weight
     12070 lb
  • CP68B - Compactors
    Gross Power
     157 HP
    Operating Weight - With Cab
     32370 lb
    Compaction Width
     84 in
  • UH640E

     -

    -
  • 777G - Off-Highway Trucks
    Gross Power - SAE J1995
     1025 HP
    Nominal Payload Class (100%)
     100 ton (US)
    Top Speed - Loaded
     41.7 mile/h
  • 340 Straight Boom - Excavators
    Gross Power - ISO 14396
     314 HP
    Operating Weight
     Long undercarriage, Straight boom, R3.9DB (12'10") stick, GDC 2.27 m3 (2.97 yd3) bucket, 700 mm (28") triple grouser shoes, 9.0 mt (19,842 lb) counterweight.
  • 3512 (50 Hz) - Electric Power
    Minimum Rating
     1000 kVA
    Maximum Rating
     1400 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption
  • 1.0 m3 (1.31 yd3), IT Coupler - Buckets - Backhoe Front
    Capacity
     1.31 yd³
    Width
     94.7 in
    Weight
     979.1 lb
  • 1070 mm (42 in) - Forks
    Carriage Width
     45.8 in
    Carriage Height
     36.8 in
    Carriage Weight
     211.6 lb
  • 25m³ (32.7yd³) Heavy Rock - Buckets - Mining Shovels

     -

    -
  • DG200 GC (Single-phase) - Electric Power
    Fuel System
     Carburetor, Down Draft
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • G3512E - Electric Power
    Fuel Type
     Natural Gas
    Frequency
     50 Hz
  • CG260-16 - Electric Power
    Fuel Type
     Natural Gas, Biogas, Coal Gas, Associated Gas, Synthesis Gas
    Frequency
     60 Hz
  • 980M - Wheel Loaders
    Net Power - ISO 9249
     386 HP
    Operating Weight
     66337 lb
    Bucket Capacities
     4.2-12.2 m³ (5.25-16.0 yd³)
  • M318F - Excavators

     -
    Operating Weight*
     17 200 to 19 700 kg (37,919 to 43,431 lb)
  • BA25 Hydraulic - Brooms
    Overall Width
     106.3 in
    Sweeping Width
     98.4 in
    Brush Diameter
     27.6 in
  • C7.1 - Industrial
    Maximum Power
     320 HP
    Rated Speed
     2200 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     715 kg (1576 lb)
  • CG260-12 - Electric Power
    Fuel Type
     Natural Gas, Coal Gas
    Frequency
     60 Hz
  • 230 mm (9 in) - Buckets - Excavator
    Capacity
     0.6 ft³
    Width
     9.1 in
    Weight
     64.8 lb
  • 1220 mm (48 in) - Fork Accessories

     -

    -
  • 4.6m³ (6.0yd³) - Buckets - Loader
    Capacity
     6 yd³
    Width
     120 in
    Weight
     6449 lb
  • DE65 GC (50 Hz) - Electric Power
    Minimum Rating
     65.0 kVA
    Maximum Rating
     65.0 kVA
    Emissions/Fuel Strategy
     Non Regulated
  • 0.76 m3 (1 yd3) - Buckets - Telehandler
    Rated Bucket Capacity
     1 yd³
    Width
     73 in
    Bucket Weight
     1096 lb
  • C4.4 ACERT - Marine Power Systems
    Maximum Rating
     88R ekW (50 Hz), 105R ekW (60 Hz)
    Minimum Rating
     58R ekW (50 Hz), 51R ekW (60 Hz)
    Frequency
     50 Hz or 60 Hz
  • 1576 mm (62 in), Bolt-On Teeth - Buckets - Skid Steer Loader
    Capacity
     0.47 yd³
    Width
     62 in
    Weight
     407.9 lb
  • C2.2 - Marine Power Systems
    Maximum Rating
     27 ekW (27 kVA)
    Minimum Rating
     16 ekW (16kVA)
    Frequency
     50 Hz or 60 Hz
  • 444 - Backhoe Loaders
    Power - Net
     92 HP
    Operating Weight - Nominal
     20860 lb
    Operating Weight - Maximum
     25353 lb
  • C32 ACERT Tier 3 Recreational - Marine Power Systems
    Power Range
     1600-1900 bhp (1193-1417 bkW)
    Speed Range
     2300 rpm
    Emissions
     EPA Tier 3, IMO II, EU IW
  • H140 S - Hammers
    Impact Energy Class
     6000 ft·lbf
    Blows per Minute
     325-540
    Maximum Operating Weight
     5865 lb
  • 1.1 m3 (1.4 yd3) Pin On, Bolt-On Cutting Edge - Buckets - Backhoe Front
    Capacity
     1.4 yd³
    Width
     95.5 in
    Weight
     2099 lb
  • C3.6 for Tractors - Industrial
    Maximum Power
     134 HP
    Rated Speed
     2000-2400 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     840 lb
  • B4s - Hammers

     -

    -
  • 796 AC - Off-Highway Trucks
    Gross Power - SAE J1995
     3500 HP

    -
    Top Speed - Loaded
     40 mile/h
  • 6m³ (7.8yd³) Heavy Rock - Buckets - Mining Shovels

     -

    -
  • C9.3 - Industrial
    Maximum Power
     400 HP
    Rated Speed
     1800-2200 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     1950 lb
  • Cat EGP Switchgear - Electric Power
    Configuration
     Configurable PLC based switchgear capable of controlling and monitoring multiple generator sets, tie and load breakers in conjunction with downstream transfer switches for standby or emergency applications
    Modes of Operation
     Multi-unit Island and multi-unit standby mode with optional redundant controls and components.
    Application
     LV and MV (208V - 38 kV)
  • CVP75 - Compactors
    Impulse Force
     16508 lb
    Cycles/Minimum
     2200
    Base Plate Width
     29 in
  • Cat Customizable Switchgear and Controls - Electric Power
    Configuration
     Application-specific switchgear with control logic designed to meet any customer's sequence of operations. Examples are 3+ Utilities, CHP applications, complex load shed schemes, etc
    Modes of Operation
     All modes of paralleling generator sets to each other and to other sources (utility, alternative fuels, wind, etc) can be supported. Caterpillar generation and control experts can design and program the most complex power schemes to meet your critical power needs
    Application
     LV and MV ( 208V - 38 kV) 50 / 60 Hz
  • CP56B - Compactors
    Gross Power
     157 HP
    Operating Weight - With Cab
     25707 lb
    Compaction Width
     84 in
  • C280-16 - Marine Power Systems
    Power Range
     6169-7577 bhp (4600-5650 bkW)
    Speed Range
     900-1000 rpm
    Emissions
     IMO II
  • SOME CAT® ENGINE PARTS

     -

    -
  • HMF210 - Flail Mowers

     -

    -
  • 1730 mm (68 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.52 yd³
    Width
     68.1 in
    Weight
     551.2 lb
  • Air Filter

     -

    -
  • 1787mm (70in) Ripper - Rippers
    Overall Length
     90.5 in
    Weight
     4641 lb
    Width
     39.1 in
  • DE165 GC (50 Hz) - Electric Power
    Minimum Rating
     163.9 kVA
    Maximum Rating
     163.9 kVA
    Emissions/Fuel Strategy
     Non Regulated
  • S3025 Rotating Scrap & Demolition Shear - Shears
    Length
     126 in
    Height
     48 in
    Width
     29.5 in
  • 1370 mm (54 in) - Fork Accessories

     -

    -
  • G213 GC Demolition & Sorting Grapple: 587-8652 - Grapples
    Capacity
     0.59 yd³
    Weight
     1526 lb
  • 0.76 m3 (1.0 yd3), Pin On - Buckets - Backhoe Front
    Capacity
     0.99 yd³
    Width
     89.1 in
    Weight
     776 lb
  • 4m³ (5.25yd³) - Buckets - Loader
    Capacity - Adapters
     5.25 yd³
    Width
     128 in
    Weight
     6501 lb
  • T112 Hydraulic Side Shift - Trenchers
    Overall Length
     106.5 in
    Overall Height
     30.9 in
    Overall Width
     74.8 in
  • 457 mm (18 in), Pin On - Buckets - Backhoe Rear
    Capacity
     6.3 ft³
    Width
     18 in
    Weight
     456.4 lb
  • 1220 mm (48 in) - Fork Accessories

     -

    -
  • 2.9 m3 (3.8 yd3), Fusion™, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     3.8 yd³
    Width
     108 in
    Weight
     2724.9 lb
  • G213 GC Demolition & Sorting Grapple: 587-8648 - Grapples
    Capacity
     0.59 yd³
    Weight - Including Bracket
     4321.06 lb
  • CP54B - Compactors
    Gross Power
     131 HP
    Operating Weight - With Cab
     24539 lb
    Compaction Width
     84 in
  • HM215C - Mulchers
    Overall Width
     69.2 in
    Weight
     1803.4 lb
    Required Hydraulics
     High Flow
  • CS56B - Compactors
    Gross Power
     157 HP
    Operating Weight - With Cab
     25346 lb
    Compaction Width
     84 in
  • T112 Manual Side Shift - Trenchers
    Overall Length
     106.5 in
    Overall Height
     30.9 in
    Overall Width
     74.8 in
  • 6.8-22 kVA SA Lvl1, Lvl2 & Lvl3 (B Series) - Generator Set Enclosures

     -

    -
  • 982M - Wheel Loaders
    Net Power - ISO 9249
     398 HP
    Operating Weight
     78402 lb
    Bucket Capacities
     4.6-12.0 m³ (6.0-15.75 yd³)
  • Pin Grabber Coupler - Trenching Profile (CB-Linkage): 389-7526 - Couplers - Excavator
    Weight
     949 lb
    Width - Machine Interface
     19.3 in
    Lifting Eye Working Load Limit
     30865 ton (US)
  • 14.5m³ (19yd³) - Buckets - Loader
    Capacity
     19 yd³
    Width
     200 in
    Weight
     31260 lb
  • H180 S - Hammers
    Impact Energy Class
     12000 ft·lbf
    Blows per Minute
     275-450
    Maximum Operating Weight
     9570 lb
  • 150 / 150 AWD - Motor Graders
    Base Power (1st Gear) - Net
     200 HP
    Operating Weight - Typically Equipped
     43950 lb
    Blade Width
     12 ft
  • 0.95 m3 (1.2 yd3), Pin On - Buckets - Backhoe Front
    Capacity
     1.26 yd³
    Width
     89.1 in
    Weight
     965 lb
  • 861 mm (34 in) - Rippers
    Overall Length
     42 in
    Weight
     235.9 lb
    Width
     13.5 in
  • 457 mm (18 in) - Buckets - Excavator
    Rated Capacity
     2.9 yd³
    Width
     18 in
    Weight
     180.8 lb
  • 3512C IMO II - Marine Power Systems
    Power Range
     1280-2551 bhp (955-1902 bkW)
    Speed Range
     1200 rpm, 1600 rpm, 1800 rpm
    Emissions
     IMO II, EU IW
  • 3.4m³ (4.5yd³) - Buckets - Loader
    Capacity
     4.5 yd³
    Width
     115 in
    Weight
     3139 lb
  • C280-8 - Marine Power Systems
    Maximum Rating
     2420 ekW (3025 kVA)
    Minimum Rating
     2350 ekW (2938 kVA)
    Frequency
     50 Hz or 60 Hz
  • 772G WTR Bare Chassis - Off-Highway Trucks

     -

    -
  • 229 mm (9 in) - Augers
    Diameter
     9 in
    Weight
     72.8 lb
    Overall Length
     48 in
  • DG50-2 (Single Phase) - Electric Power
    Fuel System
     Natural Gas / LP Vapor
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
CONVERTER kW / kVA
DO YOU KNOW THE ENERGY YOU NEED FOR YOUR HOME OR BUSINESS?

Discover in 3 steps how our Converter kW / kVA works
Conversor KVA/KW
Back
​1 – Enter your electric needs in amperes (Amps)
A two bedroom house can use about 30 amps and a three bedroom house, about 45 amperes. A small business can use about 50-100 amps.

2 - Enter the input voltage in your home or business (Volts)
Most residential applications have about 220 Volts (V). Most companies have about 400 V.

3 - Choose from a single to a three-phase current (Monofásica ou Trifásica)
The houses are generally a single phase. Companies are generally three phases.
Saiba como calcular
Monofásico Trifásico
DO YOU ALREADY KNOW THE ENERGY YOU NEED?
CHECK OUT OUR COMPLETE RANGE OF GENSETS.

How can we help you?


  (+351) 219 409 300

Business Hours
Monday and Tuesday: 09:00 -13:00 | 14:00 -17:30
Wednesday and Friday: 08:30 -13:00  | 14:00 -17:30

Equipments
Power Systems
Parts
Used Equipment
Rental
Service
Technology Solutions
VisionLink
Company
Works with us
Special Offers
News

Follow us

Termos e condições de venda   |   Privacy Policy   |   Cookie Policy   |   Customer Portal Terms and Conditions   |   Livro de reclamações

© Copyright 2020. All rights reserved.