We use cookies on our site to improve performance and experience. By continuing, you agree to accept all cookies.
Read privacy policy.
Contact us TODAY
(+351) 219 409 300
PT |EN

Rental

Service Appointment

Buy Parts

Used Equipment

Customer Portal

Need help?

Select the area
parts.cat.com
parts.cat.com

vision link
vision link

my.cat.com
my.cat.com

S.O.S. Web Service
S.O.S. Web Service
General informations
Specifications
Alternative Products
> > >

Check availability

Specifications

-

-



Units
See less

If you have seen this product, it may interest you

  • 1000 mm (39 in) - Buckets - Excavator
    Rated Capacity
     3.11 yd³
    Width
     39.4 in
    Weight
     128.3 lb
  • CW-30S - Couplers - Excavator
    Weight
     462 lb
    Width
     16.8 in
    Load Rating, Hoisting Hook
     11 ton (US)
  • 988K XE - Wheel Loaders
    Net Power
     541 HP
    Operating Weight
     116362 lb
    Bucket Capacities
     4.7-13 m3 (6.2-17 yd3)
  • 1370 mm (54 in) - Fork Accessories

     -

    -
  • G3516A - Electric Power
    Fuel Type
     Natural Gas, Biogas, Coal Gas
    Frequency
     50 / 60 Hz
  • G3304 - Industrial
    Maximum Power
     95 HP

    -
    Weight - Net Dry
     757 kg (1670 lb)
  • PM820 - Cold Planers
    Rated Power
     800.6 HP
    Operating Weight
     79653 lb
    Milling Width
     79.1 in
  • C280-16 - Marine Power Systems
    Maximum Rating
     4840 ekW (6050 kVA)
    Minimum Rating
     4700 ekW (5875 kVA)
    Frequency
     50 Hz or 60 Hz
  • BA25 Manual - Brooms
    Overall Width
     106.3 in
    Sweeping Width
     98.4 in
    Brush Diameter
     27.6 in
  • 152 mm (6 in) - Augers
    Diameter
     6 in
    Weight
     57.3 lb
    Overall Length
     48.2 in
  • 457 mm (18 in), Pin On - Buckets - Backhoe Rear
    Capacity
     4.6 ft³
    Width
     18 in
    Weight
     304.2 lb
  • 988K - Wheel Loaders
    Net Power
     541 HP
    Operating Weight
     112574 lb
    Bucket Capacities
     4.7-13 m3 (6.2-17 yd3)
  • 434 - Backhoe Loaders
    Power - Net
     92 HP
    Operating Weight - Nominal
     20216 lb
    Operating Weight - Maximum
     25353 lb
  • 1893 mm (75 in) - Blades
    Overall Width
     74.5 in
    Weight
     690 lb
  • 990K Millyard Arrangement - Wheel Loaders
    Net Power
     699 HP
    Operating Weight
     202398 lb
  • AP655F - Asphalt Pavers
    Gross Power
     173 HP
    Operating Weight - SE60 V Screed only
     7495 lb
    Standard Paving Range - SE50 V, SE50 VT
     2.55 - 5.0 m (8' 4" - 16' 4")
  • CW-20 - Couplers - Excavator
    Weight
     418 lb
    Width
     22 in
    Load Rating, Hoisting Hook
     11 ton (US)
  • 610 mm (24 in), Pin On - Buckets - Backhoe Rear
    Capacity
     5 ft³
    Width
     24 in
    Weight
     383.6 lb
  • C9 (50 Hz) - Electric Power
    Minimum Rating
     230 kVA
    Maximum Rating
     330 kVA
    Emissions/Fuel Strategy
     EU Stage IIIA, Low Fuel Consumption, U.S. EPA Certified for Stationary Emergency Use only ( Tier 3 Nonroad Equivalent Emission Standards)
  • C9 - Industrial
    Maximum Power
     350 HP
    Rated Speed
     1800-2200 rpm
    Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     1490 kg (3285 lb)
  • MH3024 - Material Handlers
    Maximum Net Power - SAE J1349/ISO 9249
     126 kW (169 hp [171 hp/PS*])
    Operating Weight
     22 950-24 165 kg (50,596-53,242 lb)
    Maximum Reach
     33.92 ft
  • 305 mm (12 in) - Augers
    Diameter
     12 in
    Weight
     90.4 lb
    Overall Length
     48 in
  • US440E

     -

    -
  • CG260-12 - Electric Power
    Fuel Type
     Natural Gas, Coal Gas
    Frequency
     60 Hz
  • 844K - Dozers
    Gross Power
     752 HP
    Operating Weight
     165089 lb
  • C7.1 (50 Hz) - Electric Power
    Minimum Rating
     135 kVA
    Maximum Rating
     220 kVA
    Emissions/Fuel Strategy
     Non Regulated, EU Stage IIIA
  • R1300G - Underground - Hard Rock
    Gross Power - SAE J1995
     165 HP
    Loaded
     60682 lb
    Nominal Payload Capacity
     14991 lb
  • CW-55 - Couplers - Excavator
    Weight
     1540 lb
    Width
     33.2 in
    Load Rating, Hoisting Hook
     22 ton (US)
  • 762 mm (30 in) - Buckets - Excavator
    Rated Capacity
     6.1 yd³
    Width
     30 in
    Weight
     280 lb
  • C0.7 - Industrial
    Maximum Power
     20.5 HP
    Rated Speed
     2800-3600 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     71 kg (156.5 lb)
  • BR115 - Brushcutters
    Overall Width
     62 in
    Cutting Width
     60 in
    Maximum Cutting Diameter
     3 in
  • 1200 mm (47 in) - Buckets - Excavator
    Capacity
     4.1 ft³
    Width
     47.2 in
    Weight
     193.3 lb
  • 1730 mm (68 in) w/Spill Guard, Bolt-On Teeth - Buckets - Skid Steer Loader
    Capacity
     0.44 yd³
    Width
     68.1 in
    Weight
     868.6 lb
  • 301.4C - Excavators
    Gross Power
     24.3 HP
    Operating Weight
     3241 lb
  • AP355F Paver - Asphalt Pavers
    Gross Power
     74.8 HP
    Operating Weight - With SE34 V
     18850 lb
    Standard Paving Range
     1.75-3.42 m (5' 9" - 11' 2")
  • A68 - Augers
    Drive Shaft Torque at Maximum Pressure
     5034.6 lb/ft
    Drive Method
     Gear Motor - Double Planetary Reduction
    Mounting Bracket Design
     Mini Excavator
  • 762 mm (30 in) - Augers
    Diameter
     30 in
    Weight
     282.2 lb
    Overall Length
     50.3 in
  • DG200 GC (Single-phase) - Electric Power
    Fuel System
     Carburetor, Down Draft
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • 980 2-wedge - Couplers - Loader
    Width
     56.8 in
    Height
     33.1 in
    Weight
     2205 lb
  • 3.6m³ (4.75yd³) Performance Series - Buckets - Loader
    Capacity
     4.75 yd³
    Width
     128 in
    Weight
     4480 lb
  • Material Handling Arm - Material Handling
    Maximum Load Rating
     1999.6 lb
    Retracted Length
     40 in
  • C13 (50 Hz) - Electric Power
    Minimum Rating
     350 kVA
    Maximum Rating
     450 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption, EU Stage IIIA Nonroad Emission Standards
  • 230 mm (9 in) - Buckets - Excavator
    Capacity
     0.6 ft³
    Width
     9.1 in
    Weight
     64.8 lb
  • C280-8 - Marine Power Systems
    Power Range
     3084-3393 bhp (2300-2530 bkW)
    Speed Range
     900 rpm
    Emissions
     IMO II
  • G3516/G3516B - Industrial
    Maximum Power
     1380 HP

    -
    Weight - Net Dry
     8401 kg (18520 lb)
  • 1500 mm (59 in), Pin On - Buckets - Backhoe Rear
    Capacity
     18.6 ft³
    Width
     59.1 in
    Weight
     743 lb
  • 303.5E CR - Excavators
    Gross Power
     33.3 HP
    Operating Weight
     7734 lb
  • 735 - Articulated Trucks
    Gross Power - SAE J1995
     434 HP
    Rated Payload
     35.3 ton (US)
    Heaped (SAE 2:1)
     26.2 yd³
  • Oils

     -

    -
  • 1220 mm (48 in) - Forks
    Carriage Width
     45.8 in
    Carriage Height
     36.8 in
    Carriage Weight
     211.6 lb
  • 3.05 m (10 ft) - Snow Pushes
    Weight
     1803.4 lb
    Overall Height
     38.4 in
    Working Width
     120 in
  • DG400 GC (3 phase) - Electric Power
    Fuel System
     Carburetor, Down Draft
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • 1883 mm (74 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Width
     74.1 in
    Height - Grapples Closed
     20.7 in
    Jaw Opening
     40 in
  • 914 mm (36 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     12 ft³
    Width
     36 in
    Weight
     509.3 lb
  • 4.4m³ (5.75yd³) Performance Series - Buckets - Loader
    Capacity
     5.75 yd³
    Width
     138 in
    Weight
     6175 lb
  • 1.34 m3 (1.75 yd3), Pin On - Buckets - Backhoe Front
    Capacity
     1.75 yd³
    Width
     95.8 in
    Weight
     1472.9 lb
  • DG300 GC (3 phase) - Electric Power
    Fuel Type
     Natural Gas
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • 2188 mm (86 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.82 yd³
    Width
     86.1 in
    Weight
     723.1 lb
  • D4 - Dozers
    Power - Net
     130 HP
    Operating Weight
     29258 lb
  • D5K2 Shiphold / Port Handling - Dozers
    Power - Net
     104 HP
    Operating Weight - XL
     22544 lb
  • 500 mm (20 in) - Buckets - Excavator
    Capacity
     2.6 ft³
    Width
     19.7 in
    Weight
     140.2 lb
  • 4.26 m (14 ft) - Snow Pushes
    Weight
     3176.9 lb
    Overall Height
     44.4 in
    Working Width
     168 in
  • 0.95 m3 (1.25 yd3), IT Coupler, Bolt-On Cutting Edge - Buckets - Backhoe Front
    Capacity
     1.26 yd³
    Width
     89.1 in
    Weight
     1110.9 lb
  • 3.4m³ (4.5yd³) - Buckets - Loader
    Capacity
     4.5 yd³
    Width
     106 in
    Weight
     2381 lb
  • C1.7 - Industrial
    Maximum Power
     40.2 HP
    Rated Speed
     2800 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     190 kg (419 lbs)
  • M 46 DF - Marine Power Systems
    Power Range
     5400 - 8685 kW
    Speed Range
     500 / 514 rpm
    Emissions
     IMO II in diesel mode / IMO III in gas mode
  • 5.0 m3 (6.5 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     6.5 yd³
    Width
     119.4 in
    Weight
     5573.3 lb
  • 1085mm (43in) Ripper - Rippers
    Overall Length
     54.5 in
    Weight
     1014 lb
    Width
     20.8 in
  • 3.1m³ (4yd³) - Buckets - Loader
    Capacity
     4 yd³
    Width
     115 in
    Weight
     2957 lb
  • ATC Service Entrance Rated MCCB & Power Breaker Based ATS - Electric Power
    Rating Range
     30-5000A
    Transfer Type
     Open / Closed / Delayed
    Switch Type
     Molded Case and Power Breaker
  • 1.0 m3 (1.3 yd3), IT Coupler, Bolt-On Cutting Edge - Buckets - Backhoe Front
    Capacity
     1.29 yd³
    Width
     89.1 in
    Weight
     1677.1 lb
  • 1829 mm (72 in) Extension - Auger Accessories

     -

    -
  • QS332 DDHS

     -

    -
  • C9 - Industrial
    Maximum Power
     375 HP
    Rated Speed
     1800-2200 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     864 kg (1905 lb)
  • 3516E (50 Hz) - Electric Power
    Minimum Rating
     2750 kVA
    Maximum Rating
     3000 kVA (3100 kVA without fan)
    Emissions/Fuel Strategy
     Low Fuel Consumption
  • 4.87 m (16 ft) - Snow Pushes
    Weight
     3276.1 lb
    Overall Height
     42.8 in
    Working Width
     192 in
  • 457 mm (36 in) - Augers
    Diameter
     914/457 mm (36/18 in)
    Weight
     308.6 lb
    Overall Length
     50.7 in
  • 890 mm (35 in) - Bale Spears
    Overall Width
     55.4 in
    Overall Height
     51.8 in
    Capacity
     3007.1 lb
  • DFS124 - Silage Defacers
    Weight
     1108.9 lb
    Overall Height
     25.2 in
    Overall Width
     96.5 in
  • C9.3 ACERT - Marine Power Systems
    Power Range
     375-476 bhp (280-355 bkW)
    Speed Range
     1800-2300 rpm
    Emissions
     EPA Tier 3 Commercial, IMO II, EU IW
  • 140 GC / 140 GC AWD - Motor Graders

     -

    -
    Blade Width
     12 ft
  • C7.1 - Industrial
    Maximum Power
     275 HP
    Rated Speed
     116-205 bkW/156-275 bhp @ 2200 rpm, 129 bkW/173 bhp @ 2500 rpm
    Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     788 kg (1737 lbs)
  • 15m³ (19.5yd³) - Buckets - Loader
    Capacity
     19.5 yd³
    Width
     222 in
    Weight
     42465 lb
  • 3516E (50 Hz) - Electric Power
    Minimum Rating
     3000 kVA
    Maximum Rating
     3500 kVA
    Emissions/Fuel Strategy
     U.S. EPA Cert. Tier 2 / Low NOx
  • 301.6 - Excavators
    Gross Power - ISO 14396
     21.6 HP
    Operating Weight
     4317 lb
  • 1829 mm (72 in) - Forks
    Carriage Width
     98.3 in
    Carriage Height
     52 in
    Carriage Weight
     1172.9 lb
  • 2337 mm (92 in) - Blades
    Overall Width
     92 in
    Length
     40.5 in
  • Heavy Duty Bucket 1050 mm (42 in): 558-7939 - Buckets - Excavator
    Capacity
     1.31 yd³
    Width
     42 in
    Weight
     2085 lb
  • C280-12 Tier 4 - Marine Power Systems
    Power Range
     4962-5444 bhp (3700-4060 bkW)
    Speed Range
     1000 rpm
    Emissions
     EPA Tier 4, IMO II
  • PM825 - Cold Planers
    Rated Power
     800.6 HP
    Operating Weight
     82673 lb
    Milling Width
     98.6 in
  • 4.6m³ (6.0yd³) Heavy Rock - Buckets - Mining Shovels

     -

    -
  • 777E - Off-Highway Trucks
    Gross Power - SAE J1995
     1016 HP
    Nominal Payload Class (100%)
     102 ton (US)
    Top Speed - Loaded
     40.9 mile/h
  • 3516B (50 Hz) with Upgradeable Package - Electric Power
    Minimum Rating
     1750 kVA
    Maximum Rating
     2250 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption, Low Emissions
  • C18 (SRMP) Marine Generator Set - Marine Power Systems
    Maximum Rating
     565 ekW (706 kVA)
    Minimum Rating
     260 ekW (325 kVA)
    Frequency
     50 hz
  • C1.5 - Industrial
    Maximum Power
     24.6 HP
    Rated Speed
     2200/2800 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     148 kg (327 lb)
  • 3.05 m (10 ft) - Snow Pushes
    Weight
     4111.6 lb
    Overall Height
     38.4 in
    Working Width
     120 in
  • 1787mm (70in) Ripper - Rippers
    Overall Length
     90.5 in
    Weight
     4641 lb
    Width
     39.1 in
  • CB2.5 - Compactors
    Gross Power
     30.7 HP
    Operating Weight
     4960 lb
    Standard Compaction Width
     39 in
  • 4.4m³ (5.75yd³) Iron Ore - Buckets - Loader
    Capacity
     5.75 yd³
    Width
     155 in
    Weight
     12070 lb
  • D7 - Dozers
    Power - Net
     265 HP
    Operating Weight
     65644 lb
  • A11 - Augers
    Drive Shaft Torque at Maximum Pressure
     815 lb/ft
    Drive Method
     Gerotor Motor - Direct Drive
    Mounting Bracket Design
     Mini Excavator
  • 2.9 m3 (3.8 yd3), Fusion™, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     3.8 yd³
    Width
     108 in
    Weight
     2724.9 lb
  • 962M - Wheel Loaders
    Maximum Net Power - 2,100 rpm - ISO 9249
     250 HP
    Operating Weight
     44591 lb
    Bucket Capacities
     2.5-9.2 m³ (3.3-12.0 yd³)
  • 4.26 m (14 ft) - Snow Pushes
    Weight
     3018.1 lb
    Overall Height
     44.4 in
    Working Width
     168 in
  • 988K - Couplers - Loader
    Width
     78.7 in
    Height
     33.8 in
    Weight
     3523 lb
  • LR15B - Rakes
    Bucket Capacity - Struck
     0.4 yd³
    Weight
     1311.7 lb
    Length
     63.8 in
  • 3.4m³ (4.5yd³) - Buckets - Loader
    Capacity
     4.5 yd³
    Width
     106 in
    Weight
     2628 lb
  • 120 / 120 AWD - Motor Graders
    Net Power Range (Tier 4)
     139 HP

    -
    Blade Width
     12 ft
  • 500 mm (20 in) - Buckets - Excavator
    Capacity
     1.6 ft³
    Width
     19.7 in
    Weight
     90.2 lb
  • 150 / 150 AWD - Motor Graders
    Base Power (1st Gear) - Net
     200 HP
    Operating Weight - Typically Equipped
     43950 lb
    Blade Width
     12 ft
  • 11m³ (14.4yd³) Standard Rock - Buckets - Mining Shovels

     -

    -
  • 318F L - Excavators
    Gross Power - SAE J1995
     91 kW (122 hp/124 PS)
    Operating Weight
     42340 lb
  • DE400 GC - Electric Power
    Minimum Rating
     400 kVA
    Maximum Rating
     400 kVA
    Emissions/Fuel Strategy
     Non-Certified Emissions
  • PM622 - Cold Planers
    Rated Power
     630 HP
    Operating Weight
     74737 lb
    Milling Width
     88 in
  • 3612 (50 Hz) - Electric Power
    Minimum Rating
     4400 kVA
    Maximum Rating
     4850 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption
  • PR190 Hydraulic Angle - Rakes
    Overall Width
     99 in
    Weight
     1320.6 lb
    Overall Length
     64 in
  • 637K - Wheel Tractor-Scrapers
    Flywheel Power - Tractor/Scraper
     425 kW (570 hp)/216 kW (290 hp)
    Scraper Capacity - Heaped
     50 yd³
    Top Speed - Loaded
     34.7 mile/h
  • 762 mm (30 in) - Buckets - Excavator
    Rated Capacity
     5.6 yd³
    Width
     30 in
    Weight
     257.9 lb
  • G318 WH Demolition & Sorting Grapple: 587-8976 - Grapples
    Capacity
     1.44 yd³
    Weight
     3569 lb
  • Engine Paralleling and Integration Control (EPIC) - Electric Power
    Configuration
     Remote modular paralleling control system (Master Control Panel for the first 2 generator sets and optional tie breaker, separate add-on control panels for up to 8 additional generator sets, utility paralleling control, and distribution control)
    Modes of Operation
     Emergency Standby with redundant master control, Utility paralleling, peak shaving, and closed transition to/from Generator Power (with optional utility control panel)
    Application
     LV and MV (208V-27kV)
  • 1370 mm (54 in) - Fork Accessories

     -

    -
  • D9 - Dozers
    Engine Power - Net SAE J1349/ISO 9249
     452 HP
    Operating Weight
     110225 lb
  • CVP110 - Compactors
    Impulse Force
     24669 lb
    Cycles/Minimum
     2200
    Base Plate Width
     34 in
  • 3048mm (120 in) Cushion Dozer - Blades
    Width
     120 in
    Height
     62 in
  • 3516E (50 Hz) - Electric Power
    Minimum Rating
     3000 kVA
    Maximum Rating
     3500 kVA
    Emissions/Fuel Strategy
     Tier 2 Equivalent, US EPA Stationary Emergency / Low NOx (1/2 TA Luft)
  • 3.8m³ (5yd³) - Buckets - Loader
    Capacity
     5 yd³
    Width
     115 in
    Weight
     3280 lb
  • 1524 mm (60 in) - Forks
    Carriage Width
     98.3 in
    Carriage Height
     52 in
    Carriage Weight
     1172.9 lb
  • 428F2 - Backhoe Loaders
    Power - Net
     89.3 HP
    Operating Weight - Nominal
     18574 lb
    Operating Weight - Maximum
     24251 lb
  • C9.3B - Industrial
    Maximum Power
     400 HP
    Rated Speed
     1800-2200 rpm
    Weight - Approximate, Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     1678-1839 kg (3699-4055 lb)
  • 825K - Compactors
    Gross Power
     435 HP
    Operating Weight
     78326 lb
  • 400 mm (16 in) - Buckets - Excavator
    Capacity
     1.6 ft³
    Width
     15.7 in
    Weight
     111.1 lb
  • 1.9 m3 (2.5 yd3), IT Coupler, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
     2.6 yd³
    Width
     94.5 in
    Weight
     1470 lb
  • C15 High Ambient Acoustic Enclosure - Generator Set Enclosures

     -

    -
  • 406 mm (16 in) - Buckets - Excavator
    Rated Capacity
     2.5 yd³
    Width
     16 in
    Weight
     163.1 lb
  • 1.9 m3 (2.5 yd3), Fusion™ Coupler - Buckets - Loader
    Capacity
     2.5 yd³
    Width
     99.7 in
    Weight
     1708.6 lb
  • 305 mm (12 in) - Augers
    Diameter
     13.5 in
    Weight
     41 lb
    Overall Length
     9.8 in
  • 926M Aggregate Handler - Wheel Loaders
    Rated Net Power
     148 HP
    Operating Weight
     29256 lb
    Bucket Capacities
     3.0-5.0 m³ (3.9-6.5 yd³)
  • 239D - Compact Track and Multi Terrain Loaders
    Gross Power - SAE J1995
     67.1 HP
    Operating Weight
     7289 lb
  • 854K - Dozers
    Gross Power
     907 HP
    Operating Weight
     224254 lb
  • G312 GC Demolition & Sorting Grapple: 587-8715 - Grapples
    Capacity
     0.52 yd³
    Weight - Including Bracket
     3075.44 lb
  • C32 - Industrial
    Maximum Power
     1350 HP
    Rated Speed
     1800-2100 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     2946 kg (6495 lb)
  • MP345 Shear Jaw - Multi-Processors
    Length
     2296 in
    Height
     1865 in
    Width
     1005 in
  • 406 mm (16 in) - Augers
    Diameter
     16 in
    Weight
     114.6 lb
    Overall Length
     48.1 in
  • 2198 mm (87 in) - Blades
    Overall Width
     86.5 in
    Weight
     729.7 lb
  • D3 - Dozers
    Power - Net
     104 HP
    Operating Weight
     20639.68 lb
  • 310 - Excavators
    Gross Power - ISO 14396
     74.3 HP
    Operating Weight
     22447 lb
  • D3K2 Mulcher - Dozers

     -

    -
  • R3000H - Underground - Hard Rock
    Gross Power - SAE J1995
     409 HP
    Loaded
     172540 lb
    Nominal Payload Capacity
     44092 lb
  • 6m³ (7.8yd³) Standard Rock - Buckets - Mining Shovels

     -

    -
  • M 43 C - Marine Power Systems
    Power Range
     6000 - 9450 kW
    Speed Range
     500-514 rpm
    Emissions
     IMO II
  • C9 230-275 kVA ACERT - Generator Set Enclosures

     -

    -
  • D2 - Dozers
    Power - Net
     92 HP
    Operating Weight
     18382 lb
  • TH357D Ag Handler - Telehandlers
    Maximum Lift Height
     22.97 ft
    Operating Weight - With Carriage and Forks*
     17163 lb
    Rated Load Capacity
     7716 lb
  • 9.5m³ (12.4yd³) Serrated Edge - Buckets - Loader
    Capacity
     12.4 yd³
    Width
     182 in
    Weight
     17910 lb
  • C18 ACERT Tier 3 Recreational - Marine Power Systems
    Power Range
     1015-1150 mhp, 1001-1136 bhp, 747-847 bkW
    Speed Range
     2300 rpm
    Emissions
     EPA Tier 3, IMO II, EU IW
  • 3.66 m (12 ft) - Snow Pushes
    Weight
     410.1 lb
    Overall Height
     16 in
    Working Width
     144 in
  • QI341/HS

     -

    -
  • CS66B - Compactors
    Gross Power
     157 HP
    Operating Weight - With Cab
     27245 lb
    Compaction Width
     84 in
  • 28m³ (36.6yd³) Heavy Rock - Buckets - Mining Shovels

     -

    -
  • 72.6 m³ (95.0 yd³) - Blades
    Capacity
     95 yd³
    Width
     265 in
  • H130 S - Hammers
    Impact Energy Class
     4500 ft·lbf
    Blows per Minute
     320-600
    Maximum Operating Weight
     4719 lb
  • T109 Hydraulic Side Shift - Trenchers
    Overall Length
     92.4 in
    Overall Height
     30.9 in
    Overall Width
     56.1 in
  • 3.66 m (12 ft) - Snow Pushes
    Weight
     2184.8 lb
    Overall Height
     38.4 in
    Working Width
     144 in
  • C32 Tier 4 / IMO III - Marine Power Systems

     -
    Rated Engine Speed
     1600-2150 rpm
    Emissions
     U.S. EPA Tier 4 Final certified IMO III emissions certified (SCR required)
  • 762 mm (30 in) Pin On - Buckets - Backhoe Rear
    Capacity
     11.3 ft³
    Width
     30 in
    Weight
     434.3 lb
  • 490 mm (19 in) - Rippers
    Overall Length
     25.9 in
    Weight
     99.2 lb
    Width
     10 in
  • C1.5 (50 Hz) - Electric Power
    Minimum Rating
     10.0 kVA
    Maximum Rating
     13.5 kVA
    Emissions/Fuel Strategy
     EU Stage IIIA
  • C4.4 - Industrial
    Maximum Power
     129.4 HP
    Rated Speed
     2200 rpm
    Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     520 kg (1146 lb)
  • 304E2 CR - Excavators
    Gross Power - ISO 14396
     41.8 HP
    Operating Weight
     8996 lb
  • 460 mm (18 in) - Buckets - Excavator
    Capacity
     2.3 ft³
    Width
     18.1 in
    Weight
     130.3 lb
  • 301.7 CR - Excavators
    Gross Power - ISO 14396
     21.6 HP
    Operating Weight
     4222 lb
  • 2298mm (90in) - Forks
    Fork Width
     90 in
    Inside Height
     55 in
    Weight
     5451 lb
  • 963K - Track Loaders
    Net Power - ISO 9249/SAE J1349
     193 HP
    Operating Weight
     44138 lb
    Capacity - General Purpose
     3.2 yd³
  • 1576 mm (62 in), Bolt-On Teeth - Buckets - Skid Steer Loader
    Capacity
     0.47 yd³
    Width
     62 in
    Weight
     407.9 lb
  • 1524 mm (60 in) - Fork Accessories

     -

    -
  • 0.85 m3 (1.1 yd3) - Buckets - Telehandler
    Rated Bucket Capacity
     1.1 yd³
    Width
     92 in
    Bucket Weight
     1389 lb
  • C7.1 - Industrial
    Maximum Power
     217 HP
    Rated Speed
     1950-2200 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     506 kg (1115 lb)
  • M 32 E - Marine Power Systems
    Maximum Rating
     5747 kWe (5940 kVA)
    Minimum Rating
     3165 kWe (3960 kVA)
  • 3.66 m (12 ft) - Snow Pushes
    Weight
     4523.9 lb
    Overall Height
     38.4 in
    Working Width
     144 in
  • 1220 mm (48 in) - Forks
    Fork Tine Length
     48 in
    Fork Tine Thickness
     2 in
    Fork Tine Weight
     75 lb
  • S2090 Straight Scrap & Demolition Shear - Shears
    Length
     170 in
    Height
     74 in
    Width
     30 in
  • 1676 mm (66 in) - Forks
    Width
     66 in
    Height - Grapples Closed
     31.9 in
    Weight
     1106.7 lb
  • 966M - Wheel Loaders
    Maximum Net Power - 1,700 rpm - SAE J1349
     276 HP
    Operating Weight
     51176 lb
    Bucket Capacities
     3.20-7.40 m³ (4.19-9.68 yd³)
  • CS68B - Compactors
    Gross Power
     157 HP
    Operating Weight - With Cab
     31572 lb
    Compaction Width
     84 in
  • A41 - Augers
    Drive Shaft Torque at Maximum Pressure
     3038.8 lb/ft
    Drive Method
     Gerotor Motor - Single Planetary Reduction
    Mounting Bracket Design
     Mini Excavator
  • 406 mm (16 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     5.7 ft³
    Width
     16 in
    Weight
     337.3 lb
  • 0.9 m3 (1.2 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     1.2 yd³
    Width
     81.9 in
    Weight
     1283.1 lb
  • 1829 mm (72 in) - Forks
    Width
     72 in
    Height - Grapples Closed
     30.3 in
    Jaw Opening
     34.5 in
  • DFS118 - Silage Defacers
    Weight
     937 lb
    Overall Height
     25.2 in
    Overall Width
     72.5 in
  • 299D2 XHP - Compact Track and Multi Terrain Loaders
    Gross Power - SAE J1995
     110 HP
    Operating Weight
     11608 lb
  • BR320 - Brushcutters
    Overall Width
     80 in
    Cutting Width
     78 in
    Maximum Cutting Diameter
     3 in
  • CM20C - Electric Power
    Minimum Rating
     985 kWe
    Maximum Rating
     1650 kWe
    Emissions/Fuel Strategy
     (WB) Stage 1 and 2
  • 2036 mm (80 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.63 yd³
    Width
     80.2 in
    Weight
     630.5 lb
  • CB2.7 - Compactors
    Gross Power
     30.7 HP
    Operating Weight
     5533 lb
    Standard Compaction Width
     47 in
  • 1.6 m3 (2.1 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
     2.2 yd³
    Width
     94.5 in
    Weight
     1342 lb
  • MP318 Universal Jaw - Multi-Processors
    Length
     79 in
    Height
     50 in
    Width
     31 in
  • 3.2 m3 (4.2 yd3), Fusion™, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     4.2 yd³
    Width
     108.1 in
    Weight
     2788.8 lb
  • CW-30S - Couplers - Excavator
    Weight
     55 lb
    Width
     7 in
    Load Rating, Hoisting Hook
     11 ton (US)
  • 299D3 XE - Skid Steer Loaders
    Gross Power - SAE J1995
     110 HP
    Operating Weight
     11756 lb
  • 1220 mm (48 in) - Fork Accessories

     -

    -
  • HF221 - Felling Heads

     -

    -
  • KNOW THE ADVANTAGES

     -

    -
  • 1883 mm (74 in) w/Spill Guard, Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.48 yd³
    Width
     74.1 in
    Weight
     961.2 lb
  • C1.1 (50 Hz) - Electric Power
    Minimum Rating
     6.8 kVA
    Maximum Rating
     9.5 kVA
    Emissions/Fuel Strategy
     EU Stage IIIA
  • 3.5 m3 (4.6 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     4.5 yd³
    Width
     108.1 in
    Weight
     2903.5 lb
  • 10m³ (13.1yd³) Standard Rock - Buckets - Mining Shovels

     -

    -
  • 1576 mm (62 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Width
     62 in
    Height - Grapples Closed
     20.7 in
    Jaw Opening
     40 in
  • CP54B - Compactors
    Gross Power
     131 HP
    Operating Weight - With Cab
     24539 lb
    Compaction Width
     84 in
  • 914 mm (36 in), Pin On - Buckets - Backhoe Rear
    Capacity
     11.5 ft³
    Width
     36 in
    Weight
     451.9 lb
  • 15.3 m³ (20.0 yd³) - Blades
    Capacity
     20 yd³
    Width
     168 in
  • 1.3 m3 (1.7 yd3), IT Coupler, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
     1.9 yd³
    Width
     94.5 in
    Weight
     1220.9 lb
  • 7m³ (9.2yd³) Standard Rock Mass Excavation - Buckets - Mining Shovels

     -

    -
  • 246D3 - Skid Steer Loaders
    Gross Power - SAE J1995
     74.3 HP
    Operating Weight
     7478 lb
    Rated Operating Capacity
     2200 lb
  • 1.03 m3 (1.35 yd3) Pin On, Bolt-On Cutting Edge - Buckets - Backhoe Front
    Capacity
     1.29 yd³
    Width
     89.1 in
    Weight
     1973.1 lb
  • DG175 GC (Single-phase) - Electric Power
    Fuel System
     Carburetor, Down Draft
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • MP324 Demolition Jaw - Multi-Processors
    Length
     82 in
    Height
     63 in
    Width
     31 in
  • 0.95 m3 (1.2 yd3), Pin On - Buckets - Backhoe Front
    Capacity
     1.26 yd³
    Width
     89.1 in
    Weight
     965 lb
  • 18.35 m³ (24.0 yd³) - Blades
    Capacity
     23.7 yd³
    Width
     168 in
  • CG170B-20 - Electric Power
    Fuel Type
     Natural Gas, Biogas, Coal Gas
    Frequency
     50 Hz
  • C12.9 - Marine Power Systems
    Power Range
     850-1000 mhp, 838-985 bhp, 625-735 bkW
    Speed Range
     2300 rpm
    Emissions
     EPA Tier 3, IMO II, EU Stage IIIA
  • Pin Grabber Coupler (B-Linkage): 455-3909 - Couplers - Excavator
    Weight
     837 lb
    Width - Machine Interface
     20.2 in
    Lifting Eye Working Load Limit
     22046 ton (US)
  • 1600 mm (63 in) - Buckets - Excavator
    Rated Capacity
     9.9 yd³
    Width
     63 in
    Weight
     552.3 lb
  • 300 mm (12 in) - Buckets - Excavator
    Capacity
     1.21 ft³
    Width
     11.8 in
    Weight
     100.5 lb
  • SW360B, 203 mm (8 in) - Saws
    Length
     93 in
    Overall Height
     70 in
    Overall Width
     73 in
  • MP365 Pulverizer Jaw - Multi-Processors

     -

    -
  • 1.9 m3 (2.5 yd3), Pin On - Buckets - Loader
    Capacity
     2.5 yd³
    Width
     99.5 in
    Weight
     1787.9 lb
  • 305 mm (12 in), Pin On - Buckets - Backhoe Rear
    Capacity
     2.5 ft³
    Width
     12 in
    Weight
     249.1 lb
  • 966M - Wheel Loaders
    Net Power - ISO 9249
     278 HP
    Operating Weight
     51176 lb
    Bucket Capacities
     3.20-7.40 m³ (4.19-9.68 yd³)
  • MP318 Pulverizer Jaw - Multi-Processors

     -

    -
  • 242D3 - Skid Steer Loaders
    Gross Power - SAE J1995
     74.3 HP
    Operating Weight
     7138 lb
    Rated Operating Capacity
     2200 lb
  • 2.7m³ (3.5yd³) Performance Series - Buckets - Loader
    Capacity
     3.5 yd³
    Width
     114 in
    Weight
     3296 lb
  • 6m³ (7.8yd³) Heavy Rock - Buckets - Mining Shovels

     -

    -
  • Heavy Duty Bucket 2300 mm (91 in): 543-2769 - Buckets - Excavator
    Capacity
     6.93 yd³
    Width
     91 in
    Weight
     9797 lb
  • G3408 - Industrial
    Maximum Power
     425 HP

    -
    Weight - Net Dry
     2245 kg (4950 lb)
  • 980M - Wheel Loaders
    Net Power - ISO 9249
     386 HP
    Operating Weight
     66337 lb
    Bucket Capacities
     4.2-12.2 m³ (5.25-16.0 yd³)
  • DE55 GC (60 Hz) - Electric Power
    Minimum Rating
     50 ekW
    Maximum Rating
     50 ekW
    Emissions/Fuel Strategy
     Non Regulated
  • 2.8m³ (3.65yd³) - Buckets - Loader
    Capacity
     3.65 yd³
    Width
     106 in
    Weight
     2445 lb
  • C9.3 Auxiliary Engine - Marine Power Systems
    Maximum Rating
     436 BHP
    Minimum Rating
     292 BHP
    Aspiration
     TA
  • Cat Customizable Switchgear and Controls - Electric Power
    Configuration
     Application-specific switchgear with control logic designed to meet any customer's sequence of operations. Examples are 3+ Utilities, CHP applications, complex load shed schemes, etc
    Modes of Operation
     All modes of paralleling generator sets to each other and to other sources (utility, alternative fuels, wind, etc) can be supported. Caterpillar generation and control experts can design and program the most complex power schemes to meet your critical power needs
    Application
     LV and MV ( 208V - 38 kV) 50 / 60 Hz
  • B6s - Hammers

     -

    -
  • 152 mm (6 in) - Augers
    Diameter
     7.5 in
    Weight
     23.4 lb
    Overall Length
     9.4 in
  • CG132B-12 - Electric Power
    Fuel Type
     Natural Gas, Biogas
    Frequency
     50 / 60 Hz
  • 460 mm (18 in) - Buckets - Excavator
    Capacity
     1.4 ft³
    Width
     18.1 in
    Weight
     83.6 lb
  • 789 (Tier 4 Final / Stage V) - Off-Highway Trucks
    Gross Power - SAE J1995
     2100 HP

    -
    Top Speed - Loaded
     35.5 mile/h
  • 249D3 - Skid Steer Loaders
    Gross Power - SAE J1995
     67.1 HP
    Operating Weight
     7831 lb
  • 1.0 m3 (1.3 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Backhoe Front
    Capacity
     1.29 yd³
    Width
     94.7 in
    Weight
     1179 lb
  • 10.7m³ (14yd³) - Buckets - Loader
    Capacity
     14 yd³
    Width
     200 in
    Weight
     26295 lb
  • 744mm (29in) Ripper - Rippers
    Overall Length
     38 in
    Weight
     439 lb
    Width
     11.4 in
  • 2.7 m3 (3.5 yd3), Fusion™ Coupler - Buckets - Loader
    Capacity
     3.5 yd³
    Width
     107.4 in
    Weight
     2220.1 lb
  • 2490 mm (98 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     1.64 yd³
    Width
     98 in
    Weight
     881.8 lb
  • 4.2m³ (5.5yd³) Performance Series - Buckets - Loader
    Capacity
     5.5 yd³
    Width
     126 in
    Weight
     4888 lb
  • 2.7 m3 (3.5 yd3), Pin On - Buckets - Loader
    Capacity
     3.5 yd³
    Width
     99.5 in
    Weight
     2134.1 lb
  • C2.2 (50 Hz) - Electric Power
    Minimum Rating
     13.0 kVA
    Maximum Rating
     22.0 kVA
    Emissions/Fuel Strategy
     EU Stage IIIA
  • 3512B - Industrial
    Maximum Power
     1650 HP
    Rated Speed
     1800 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     6078 kg (13,400 lb)
  • M317F - Excavators

     -
    Operating Weight*
     17 550 to 18 550 kg (38,691 to 40,896 lb)
  • C4.4 - Industrial
    Maximum Power
     108.6 HP
    Rated Speed
     2200 rpm
    Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     465 kg (1025 lb)
  • 160 / 160 AWD - Motor Graders
    Base Power (1st Gear) - Net
     221 HP
    Operating Weight - Typically Equipped
     45547 lb
    Blade Width
     14 ft
  • 950K/M-962K/M Fusion™ - Couplers - Loader
    Weight
     1248 lb

    -
  • 1.0 m3 (1.3 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Backhoe Front
    Capacity
     1.26 yd³
    Width
     89.1 in
    Weight
     1021 lb
  • 406 mm (16 in) - Buckets - Excavator
    Rated Capacity
     3.7 yd³
    Width
     16 in
    Weight
     205 lb
  • AD22 - Underground - Hard Rock
    Gross Power - SAE J1995
     325 HP
    Loaded
     97488 lb
    Nominal Payload Capacity
     48501 lb
  • 4.6m³ (6yd³) Performance Series - Buckets - Loader
    Capacity
     6 yd³
    Width
     126 in
    Weight
     5077 lb
  • 508 mm (20 in) - Buckets - Excavator
    Rated Capacity
     3.3 yd³
    Width
     20 in
    Weight
     191.8 lb
  • 3512 - Industrial
    Maximum Power
     1600 HP
    Rated Speed
     1460-1750 rpm
    Weight - Approximate, Net Dry (Basic Operating Engine Without Optional Attachments)
     6350 kg (13999 lb)
  • 3.8 m3 (5.0 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     5 yd³
    Width
     108.1 in
    Weight
     3062.2 lb
  • 1.9 m3 (2.5 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
     2.4 yd³
    Width
     94.5 in
    Weight
     1436.1 lb
  • 23m³ (31yd³) - Buckets - Loader
    Capacity
     31 yd³
    Width
     248 in
    Weight
     38880 lb
  • 313 GC - Excavators

     -
    Operating Weight
     30400 lb
  • SEAL KITS

     -

    -
  • 3512C - Industrial
    Maximum Power
     1500 HP
    Rated Speed
     1800 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     6078 kg (13,400 lb)
  • 326F L/326F LN (2017) - Excavators

     -
    Operating Weight
     59325 lb
  • 2.44 m (8 ft) - Snow Pushes
    Weight
     390.2 lb
    Overall Height
     16 in
    Working Width
     96 in
  • M 34 DF - Marine Power Systems
    Maximum Rating
     4574 kWe (5724 kVA)
    Minimum Rating
     2934 kWe (3672 kVA)
  • 325 - Excavators

     -
    Operating Weight
     49604 lb
  • 1.1 m3 (1.4 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     1.4 yd³
    Width
     81.9 in
    Weight
     979.1 lb
  • BA30 Hydraulic - Brooms
    Overall Width
     126 in
    Sweeping Width
     118.1 in
    Brush Diameter
     36 in
  • 730C2 Bare Chassis - Articulated Trucks
    Gross Power - SAE J1995
     375 HP
    Rated Payload
     31 t
  • 5.0 m3 (6.5 yd3), Fusion™, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     6.5 yd³
    Width
     108.1 in
    Weight
     3311.3 lb
  • 19m³ (25yd³) - Buckets - Loader
    Capacity
     25 yd³
    Width
     243 in
    Weight
     27509 lb
  • 9m³ (11.8yd³) Heavy Rock - Buckets - Mining Shovels

     -

    -
  • 311F L RR - Excavators
    Gross Power - SAE J1995
     74 HP
    Operating Weight
     28660 lb
  • 1.1 m3 (1.4 yd3), IT Coupler - Buckets - Backhoe Front
    Capacity
     1.4 yd³
    Width
     95.5 in
    Weight
     1612 lb
  • CW-40S - Couplers - Excavator
    Weight
     473 lb
    Width
     16.8 in
    Load Rating, Hoisting Hook
     11 ton (US)
  • 906M Ag Handler - Wheel Loaders
    Rated Net Power - 2,500 rpm - SAE J1349
     68 HP
    Operating Weight
     12758 lb
    Bucket Capacities
     0.75-1.2 m3 (1.0-1.6 yd3)
  • T112 Hydraulic Side Shift - Trenchers
    Overall Length
     106.5 in
    Overall Height
     30.9 in
    Overall Width
     74.8 in
  • 610 mm (24 in), Pin On - Buckets - Backhoe Rear
    Capacity
     6.2 ft³
    Width
     24 in
    Weight
     291 lb
  • DIN BATTERIES

     -

    -
  • PR172 Manual Angle - Rakes
    Overall Width
     81 in
    Weight
     899.5 lb
    Overall Length
     64 in
  • UH440E

     -

    -
  • 1730 mm (68 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.63 yd³
    Width
     68.1 in
    Weight
     568.8 lb
  • 610 mm (24 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     9.2 ft³
    Width
     24 in
    Weight
     427.7 lb
  • 992K - Wheel Loaders
    Net Power
     814 HP
    Operating Weight
     220089 lb
    Bucket Capacities
     10.7-12.3 m3 (14-16 yd3)
  • 306 CR - Excavators
    Gross Power - ISO 14396
     57.9 HP
    Operating Weight
     15766 lb
  • R1600H - Underground - Hard Rock
    Gross Power - SAE J1995
     279 HP
    Loaded
     88956 lb
    Nominal Payload Capacity
     22487 lb
  • T112 Hydraulic Side Shift - Trenchers
    Overall Length
     106.5 in
    Overall Height
     30.9 in
    Overall Width
     74.8 in
  • 508 mm (20 in) - Buckets - Excavator
    Rated Capacity
     3.6 yd³
    Width
     20 in
    Weight
     207.2 lb
  • PR172 Hydraulic Angle - Rakes
    Overall Width
     81 in
    Weight
     925.9 lb
    Overall Length
     64 in
  • 1370 mm (54 in) - Fork Accessories

     -

    -
  • 1.7 m3 (2.2 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
     2.2 yd³
    Width
     94.5 in
    Weight
     1524.9 lb
  • 0.9 m3 (1.2 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     1.2 yd³
    Width
     74.4 in
    Weight
     870.4 lb
  • CW-10 - Couplers - Excavator
    Weight
     143 lb
    Width
     12.4 in
    Load Rating, Hoisting Hook
     4.4 ton (US)
  • C9.3 Marine Generator Set - Marine Power Systems
    Maximum Rating
     250R ekW (313 kVA) at 50hz, 300 ekW (375 kVA) at 60hz
    Minimum Rating
     185R ekW (231 kVA) at 50hz, 224R ekW (280 kVA) at 60hz
    Frequency
     50 Hertz & 60 Hertz
  • 309 CR - Excavators
    Gross Power - ISO 14396
     74.3 HP
    Operating Weight
     20731 lb
  • C2.8 - Industrial
    Maximum Power
     74 HP
    Rated Speed
     2200 - 2400 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     750 lb
  • AD45 - Underground - Hard Rock
    Engine Gross Power - ISO 14396
     599 HP
    Loaded - Front Axle
     46.8%
    Nominal Payload Capacity
     99208 lb
  • H140 S - Hammers
    Impact Energy Class
     6000 ft·lbf
    Blows per Minute
     325-540
    Maximum Operating Weight
     5865 lb
  • 2.3m³ (3yd³) - Buckets - Loader
    Capacity
     3 yd³
    Width
     106 in
    Weight
     3582 lb
  • 8.6m (11.2)yd General Duty - Buckets - Mining Shovels

     -

    -
  • CB1.7 - Compactors
    Gross Power
     24.7 HP
    Operating Weight
     3538 lb
    Standard Compaction Width
     35 in
  • CTG Series Automatic Transfer Switch - Electric Power
    Rating Range
     40-3000A
    Transfer Type
     Open transition
    Switch Type
     Contactor based
  • 1.14 m3 (1.5 yd3), Pin On - Buckets - Backhoe Front
    Capacity
     1.5 yd³
    Width
     94.7 in
    Weight
     1056 lb
  • CD10 Split Drum - Compactors
    Gross Power
     101.9 HP
    Operating Weight
     22311 lb
    Maximum Compaction Width
     118 in
  • Severe Duty Bucket 1950 mm (77 in): 518-9337 - Buckets - Excavator
    Capacity
     4.48 yd³
    Width
     77 in
    Weight
     6625 lb
  • M316 - Excavators

     -
    Operating Weight Maximum
     40560 lb
  • M 34 DF - Marine Power Systems
    Power Range
     3060-4770 bkW
    Speed Range
     720 / 750 rpm
    Emissions
     IMO III
  • 914 mm (36 in) - Buckets - Excavator
    Rated Capacity
     10.6 yd³
    Width
     36 in
    Weight
     368.2 lb
  • GSH425 4-Tine, 750-Liter Orange Peel Grapple - Grapples
    Capacity
     1 yd³
    Operating Weight
     3461 lb
  • C32 (50 Hz) - Electric Power
    Minimum Rating
     910 kVA
    Maximum Rating
     1500 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption, Low Emissions, EPA Certified for Stationary Emergency Application (Emits Equivalent U.S. EPA Tier 2 Nonroad Standards)
  • 262D3 - Skid Steer Loaders
    Gross Power - SAE J1995
     74.3 HP
    Operating Weight
     8296 lb
    Rated Operating Capacity
     2700 lb
  • 226D3 - Skid Steer Loaders
    Gross Power - SAE J1995
     67.1 HP
    Operating Weight
     5849 lb
    Rated Operating Capacity
     1550 lb
  • QA335

     -

    -
  • 800 mm (32 in) - Buckets - Excavator
    Capacity
     79.3 l
    Width
     31.5 in
    Weight
     179.5 lb
  • HYDRAULIC AND TRANSMISSION FILTERS

     -

    -
  • BRX118 Industrial - Brushcutters
    Overall Width
     75.2 in
    Cutting Width
     72 in
    Maximum Cutting Diameter
     8 in
  • 323 - Excavators
    Engine Power - ISO 9249
     172 HP
    Operating Weight
     56200 lb
  • C175-16 - Marine Power Systems
    Power Range
     2683-3420 bhp (2001-2550 bkW)
    Speed Range
     1600-1800 rpm
    Emissions
     IMO II
  • R2900G - Underground - Hard Rock
    Gross Power - SAE J1995
     409 HP
    Loaded - Front Axle
     110716 lb
    Nominal Payload Capacity
     37920 lb
  • VM 43 C - Marine Power Systems
    Maximum Rating
     16111 kWe (20160 kVA)
    Minimum Rating
     11508 kWe (14400 kVA)
  • 770G WTR Bare Chassis - Off-Highway Trucks

     -

    -
  • 5.7m³ (7.5yd³) - Buckets - Loader
    Capacity
     7.5 yd³
    Width
     130 in
    Weight
     3800 lb
  • C15 Sound Attenuated Enclosure 50 and 60 Hz - Generator Set Enclosures

     -

    -
  • PM310 Wheel Undercarriage - Cold Planers
    Rated Power
     336.6 HP
    Operating Weight
     46473 lb
    Milling Width
     39.4 in
  • AD60 - Underground - Hard Rock
    Gross Power - SAE J1995
     805 HP
    Loaded
     246917 lb
    Nominal Payload Capacity
     132277 lb
  • 300 mm (12 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     3.4 ft³
    Width
     11.8 in
    Weight
     249.1 lb
  • 0.37 m3 (0.48 yd3) - Buckets - Telehandler
    Rated Bucket Capacity
     0.48 yd³
    Width
     72 in
    Bucket Weight
     829 lb
  • C175-16 (50 Hz) - Electric Power
    Minimum Rating
     2500 kVA
    Maximum Rating
     3100 kVA
    Emissions/Fuel Strategy
     Low Fuel, Low Emissions
  • ADVANTAGES OF A REMANUFACTURED PART

     -

    -
  • 340F UHD - Excavators
    Gross Power - SAE J1995
     238 kW (324 PS)
    Operating Weight
     100310 lb
  • 2080 mm (82 in), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Height - Grapples Closed
     41.5 in
    Width
     81.9 in
    Weight
     1295 lb
  • G213 GC Demolition & Sorting Grapple: 587-8655 - Grapples
    Capacity
     0.59 yd³
    Weight
     1508 lb
  • 2.9m³ (3.75yd³) - Buckets - Loader
    Capacity
     3.75 yd³
    Width
     117 in
    Weight
     4026 lb
  • DE200 GC (50 Hz) - Electric Power
    Minimum Rating
     200 kVA
    Maximum Rating
     200 kVA
    Emissions/Fuel Strategy
     Non Regulated
  • 1.5 m3 (2.0 yd3), ISO Coupler, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
     2.1 yd³
    Width
     94.5 in
    Weight
     1304.9 lb
  • 657 - Wheel Tractor-Scrapers
    Flywheel Power - Tractor/Scraper
     469kW (629 hp) / 353 kW (473 hp)
    Scraper Capacity - Heaped
     44 yd³
    Top Speed - Loaded
     33 mile/h
  • 457 mm (18 in) Pin On - Buckets - Backhoe Rear
    Capacity
     6.4 ft³
    Width
     18 in
    Weight
     335.1 lb
  • A23 - Augers
    Drive Shaft Torque at Maximum Pressure
     1699.3 lb/ft
    Drive Method
     Gerotor Motor - Direct Drive
    Mounting Bracket Design
     Skid Steer Loader, Compact Wheel Loader
  • C4.4 - Industrial
    Maximum Power
     142 HP
    Rated Speed
     2200 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     360 kg (793.7 lb)
  • 3.6m³ (4.75yd³) Performance Series - Buckets - Loader
    Capacity
     4.75 yd³
    Width
     128 in
    Weight
     4859 lb
  • 1.2 m3 (1.6 yd3), IT Coupler, Bolt-On Teeth - Buckets - Compact Wheel Loader
    Rated Capacity
     1.9 yd³
    Width
     95.6 in
    Weight
     1129 lb
  • 3508 - Industrial
    Maximum Power
     1000 HP
    Rated Speed
     1200-1800 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     4309 kg (9500 lb)
  • CM43C V-Type - Electric Power
    Minimum Rating
     11170 kWe
    Maximum Rating
     14890 kWe
    Emissions/Fuel Strategy
     (WB) Cert stage 1 and 2
  • 28.3 m³ (37.0 yd³) - Blades
    Capacity
     37 yd³
    Width
     216 in
  • 0.8 m3 (1.0 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     1 yd³
    Width
     74.4 in
    Weight
     1297.4 lb
  • C18 Tier 4 Final Sound Attenuated Enclosure - Generator Set Enclosures

     -

    -
  • 910M - Wheel Loaders
    Net Power
     97 HP
    Operating Weight
     17893 lb
    Bucket Capacities
     1.3 m3-1.9 m3 (1.7 yd3-2.5 yd3)
  • 1.1 m3 (1.4 yd3), Pin On - Buckets - Backhoe Front
    Capacity
     1.4 yd³
    Width
     89.1 in
    Weight
     1011.9 lb
  • 938M Aggregate Handler - Wheel Loaders
    Rated Net Power
     182 HP
    Operating Weight
     36075 lb
    Bucket Capacities
     2.9-3.2 m3 (3.8-4.2 yd3)
  • C4.4 - Industrial
    Maximum Power
     200 HP
    Rated Speed
     2200 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     400-420 kg (881.8-926 lb)
  • MP324 Pulverizer Jaw - Multi-Processors

     -

    -
  • 381 mm (15 in) - Augers
    Diameter
     15 in
    Weight
     111.1 lb
    Overall Length
     50.7 in
  • 3.05 m (10 ft) - Snow Pushes
    Weight
     476.2 lb
    Overall Height
     16 in
    Working Width
     120 in
  • 313F GC - Excavators

     -
    Operating Weight
     29300 lb
  • 2.5 m3 (3.25 yd3) - Buckets - Telehandler
    Rated Bucket Capacity
     3.25 yd³
    Width
     98 in
    Bucket Weight
     1159 lb
  • 36.70 m³ (48.0 yd³) - Blades
    Capacity
     48 yd³
    Width
     226 in
  • Pumps & Motors

     -

    -
  • PR184 Manual Angle - Rakes
    Overall Width
     93 in
    Weight
     1025.1 lb
    Overall Length
     64 in
  • 1812 mm (71 in), ISO - Forks
    Carriage Width
     71.3 in
    Grapple Height
     102.6 in
    Grapple Weight
     3741.2 lb
  • AP255E - Asphalt Pavers
    Gross Power
     46 HP
    Operating Weight - With Screed
     9921 lb
  • 930M Waste Handler - Wheel Loaders
    Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4)
     160 HP
    Operating Weight
     33396 lb
    Bucket Capacities
     3.0-5.0 m3 (3.9-6.5 yd3)
  • 0.8 m3 (1.0 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     1 yd³
    Width
     74.4 in
    Weight
     813.9 lb
  • D4K2 Tier 4 Final/Stage IV - Dozers
    Power - Net
     92 HP
    Operating Weight - XL
     18007 lb
  • 1290mm (51in) Ripper - Rippers
    Overall Length
     64.9 in
    Weight
     1755 lb
    Width
     27 in
  • 972M - Wheel Loaders
    Maximum Net Power - 1,700 rpm - SAE J1349
     299 HP
    Operating Weight
     54871 lb
    Bucket Capacities
     3.20-9.94 m³ (4.19-13.0 yd³)
  • HFW232 - Felling Heads

     -

    -
  • 302.7D CR - Excavators
    Gross Power
     24.3 HP
    Operating Weight
     6239 lb
  • 2 m3 (2.6 yd3) - Buckets - Telehandler
    Rated Bucket Capacity
     2.6 yd³
    Width
     98 in
    Bucket Weight
     1007 lb
  • 1300 mm (51 in) - Buckets - Excavator
    Capacity
     220.3 l
    Width
     51.2 in
    Weight
     260.6 lb
  • 3.66 m (12 ft) - Snow Pushes
    Weight
     2782.2 lb
    Overall Height
     44.4 in
    Working Width
     144 in
  • 1.1 m3 (1.4 yd3), IT Coupler, Bolt-On Cutting Edge - Buckets - Backhoe Front
    Capacity
     1.4 yd³
    Width
     95.5 in
    Weight
     1748 lb
  • 457 mm (18 in), Pin On - Buckets - Backhoe Rear
    Capacity
     3.4 ft³
    Width
     18 in
    Weight
     324.1 lb
  • 7.4m (9.7)yd General Duty - Buckets - Mining Shovels

     -

    -
  • G318 Demolition & Sorting Grapple: 587-8965 - Grapples
    Capacity
     0.98 yd³
    Weight - Including Bracket
     4125 lb
  • CW-70 - Couplers - Excavator
    Weight
     2750 lb
    Width
     33.6 in
    Load Rating, Hoisting Hook
     22 ton (US)
  • G213 GC Demolition & Sorting Grapple: 587-8648 - Grapples
    Capacity
     0.59 yd³
    Weight - Including Bracket
     4321.06 lb
  • 1.1 m3 (1.4 yd3) Pin On, Bolt-On Cutting Edge - Buckets - Backhoe Front
    Capacity
     1.4 yd³
    Width
     95.5 in
    Weight
     2099 lb
  • M320F (2017) - Excavators

     -
    Operating Weight*
     18 750 to 20 650 kg (41,337 to 45,525 lb)
  • T112 Manual Side Shift - Trenchers
    Overall Length
     106.5 in
    Overall Height
     30.9 in
    Overall Width
     74.8 in
  • 1.34 m3 (1.75 yd3), Pin On - Buckets - Backhoe Front
    Capacity
     1.75 yd³
    Width
     95.8 in
    Weight
     1240 lb
  • 11.5m³ (15yd³) - Buckets - Loader
    Capacity
     15 yd³
    Width
     192 in
    Weight
     21552 lb
  • 444 - Backhoe Loaders
    Power - Net
     92 HP
    Operating Weight - Nominal
     20860 lb
    Operating Weight - Maximum
     25353 lb
  • 5.8m (7.6)yd Extreme Duty - Buckets - Mining Shovels

     -

    -
  • 14.8 m³ (19.4 yd³) - Blades
    Capacity
     19.4 yd³
    Width
     193 in
  • 4.26 m (14 ft) - Snow Pushes
    Weight
     3031.4 lb
    Overall Height
     42.8 in
    Working Width
     168 in
  • 914 mm (36 in), Pin On - Buckets - Backhoe Rear
    Capacity
     15.5 ft³
    Width
     36 in
    Weight
     703.3 lb
  • 914 mm (36 in) Pin On - Buckets - Backhoe Rear
    Capacity
     13.4 ft³
    Width
     36 in
    Weight
     491.6 lb
  • 1.03 m3 (1.35 yd3) Pin On, Bolt-On Cutting Edge - Buckets - Backhoe Front
    Capacity
     1.29 yd³
    Width
     89.1 in
    Weight
     1742.1 lb
  • 797F - Off-Highway Trucks
    Gross Power - SAE J1995
     4000 HP

    -
    Top Speed - Loaded
     39.5 mile/h
  • 1200 mm (47 in) - Forks
    Fork Tine Width
     4 in
    Fork Tine Thickness
     2.36 in
    Fork Tine Length
     42 in
  • SG36 - Stump Grinders
    Overall Length
     68.4 in
    Overall Height
     32 in
    Overall Width
     46.3 in
  • HM112C - Mulchers
    Overall Width
     59.8 in
    Weight
     1682.1 lb
    Required Hydraulics
     Standard Flow
  • 0.9 m3 (1.2 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     1.2 yd³
    Width
     74.4 in
    Weight
     869.1 lb
  • 908M - Wheel Loaders
    Net Power
     74 HP
    Operating Weight
     14032 lb
    Bucket Capacities
     0.75-1.5 m3 (1.0-2.0 yd3)
  • 320 GC - Excavators
    Engine Power - ISO 9249
     146 HP
    Operating Weight
     48281 lb
  • D8T - Dozers
    Power - Net
     354 HP
    Operating Weight
     87600 lb
  • CP68B - Compactors
    Gross Power
     157 HP
    Operating Weight - With Cab
     32370 lb
    Compaction Width
     84 in
  • 1220 mm (48 in) - Fork Accessories

     -

    -
  • 3.05 m (10 ft) - Snow Pushes
    Weight
     425.1 lb
    Overall Height
     16 in
    Working Width
     120 in
  • Pin Grabber Coupler (CB-Linkage): 455-3911 - Couplers - Excavator
    Weight
     1025 lb
    Width - Machine Interface
     21.6 in
    Lifting Eye Working Load Limit
     30865 ton (US)
  • 793D - Off-Highway Trucks
    Gross Power - SAE J1995
     2415 HP

    -
    Top Speed - Loaded
     33.7 mile/h
  • G3512/G3512B - Industrial
    Maximum Power
     1035 HP

    -
    Weight - Net Dry
     4950 kg (10913 lb)
  • 6.6m (8.6)yd Heavy Duty - Buckets - Mining Shovels

     -

    -
  • 631K - Wheel Tractor-Scrapers
    Flywheel Power - Tractor/Scraper
     570 HP
    Scraper Capacity - Heaped
     34 yd³
    Top Speed - Loaded
     34.7 mile/h
  • 2137 mm (84 in) - Rakes
    Width
     84 in
    Weight
     1115.1 lb
    Jaw Opening
     37 in
  • C0.5 - Industrial
    Maximum Power
     13.7 HP
    Rated Speed
     2000-3600 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     126 lb
  • D6 XE - Dozers
    Power - Net
     215 HP
    Operating Weight
     51333 lb
  • 1524 mm (60 in), Pin On - Buckets - Backhoe Rear
    Capacity
     16.7 ft³
    Width
     60 in
    Weight
     529.1 lb
  • 4.6m³ (6.0yd³) Heavy Rock - Buckets - Mining Shovels

     -

    -
  • 2.9 m3 (3.8 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     3.8 yd³
    Width
     108 in
    Weight
     2758 lb
  • 302.2D - Excavators
    Gross Power - ISO 14396
     24.3 HP
    Operating Weight
     4464 lb
  • 992mm (39in) Ripper - Rippers
    Overall Length
     50.5 in
    Weight
     728 lb
    Width
     20 in
  • 1.0 m3 (1.31 yd3), IT Coupler - Buckets - Backhoe Front
    Capacity
     1.31 yd³
    Width
     94.7 in
    Weight
     979.1 lb
  • C32 ACERT Tier 3 - Marine Power Systems
    Power Range
     750-1800 bhp (559-1342 bkW)
    Speed Range
     1600-2300 rpm
    Emissions
     EPA Tier 3, IMO II, EU IW
  • CG132B-8 - Electric Power
    Fuel Type
     Natural Gas, Biogas, Coal Gas
    Frequency
     50 / 60 Hz
  • 3.8 m3 (5.0 yd3), Fusion™, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     5 yd³
    Width
     108.1 in
    Weight
     3015.9 lb
  • CG260-16 - Electric Power
    Fuel Type
     Natural Gas
    Frequency
     50 / 60 Hz
  • C27 and C32 Sound Attenuated Enclosure - Generator Set Enclosures

     -

    -
  • 980 2-wedge - Couplers - Loader
    Width
     56.8 in
    Height
     33.1 in
    Weight
     2199 lb
  • DG450 GC (3 phase) - Electric Power
    Fuel System
     Carburetor, Down Draft
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • CW-40 - Couplers - Excavator
    Weight
     528 lb
    Width
     22 in
    Load Rating, Hoisting Hook
     11 ton (US)
  • 340F - Excavators
    Engine Power - ISO 9249
     306 HP
    Operating Weight
     94358 lb
  • M 20 C - Marine Power Systems
    Maximum Rating
     1726 kWe (2160 kVA)
    Minimum Rating
     979 kWe (1224 kVA)
  • 914 mm (36 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     16.2 ft³
    Width
     36 in
    Weight
     560 lb
  • 2036 mm (80 in), Bolt-On Teeth - Buckets - Skid Steer Loader
    Capacity
     0.63 yd³
    Width
     80.2 in
    Weight
     582 lb
  • 910 - Wheel Loaders
    Rated Net Power - ISO 9249
     98 HP
    Operating Weight
     18102 lb
    Bucket Capacities
     1.3-1.9 m3 (1.7-2.5 yd3)
  • C15 - Industrial
    Maximum Power
     595 HP
    Rated Speed
     1800-2100 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     1469 kg (3239 lb)
  • 3512B (50 Hz) with Upgradeable Package - Electric Power
    Minimum Rating
     1320 kVA
    Maximum Rating
     1750 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption, Low Emissions
  • 1.0 m3 (1.3 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     1.3 yd³
    Width
     80.5 in
    Weight
     908.1 lb
  • C4.4 - Industrial
    Maximum Power
     173.5 HP
    Rated Speed
     2200 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     400-420 kg (881.8-926 lb)
  • C7.1 - Industrial
    Maximum Power
     320 HP
    Rated Speed
     2200 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     715 kg (1576 lb)
  • 914 - Wheel Loaders
    Rated Net Power - ISO 9249
     98 HP
    Operating Weight
     19103 lb
    Bucket Capacities
     1.3-1.9 m3 (1.7-2.5 yd3)
  • 1.14 m3 (1.5 yd3), IT Coupler - Buckets - Backhoe Front
    Capacity
     1.5 yd³
    Width
     94.7 in
    Weight
     2270.8 lb
  • M318 - Excavators

     -
    Operating Weight Maximum
     43980 lb
  • 610 mm (24 in), Pin On - Buckets - Backhoe Rear
    Capacity
     9.5 ft³
    Width
     24 in
    Weight
     546.7 lb
  • 3.6m³ (4.75yd³) - Buckets - Loader
    Capacity - Adapters
     4.75 yd³
    Width
     128 in
    Weight
     5436 lb
  • 1.3 m3 (1.7 yd3), Bolt-On Teeth - Buckets - Compact Wheel Loader
    Capacity
     1.7 yd³
    Width
     81.1 in
    Weight
     961.2 lb
  • MP324 Concrete Cutter Jaw - Multi-Processors
    Length
     84 in
    Height
     59 in
    Width
     31 in
  • MP332 Shear Jaw - Multi-Processors
    Length
     2146 in
    Height
     1615 in
    Width
     1005 in
  • 3516B - Industrial
    Maximum Power
     2200 HP
    Rated Speed
     1800 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     7484 kg (16,500 lb)
  • C3.6 - Industrial
    Maximum Power
     121 HP
    Rated Speed
     2200-2400 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     381 kg (840 lb)
  • 1070 mm (42 in) - Forks
    Fork Tine Width
     4 in
    Fork Tine Thickness
     1.77 in
    Fork Tine Length
     42 in
  • 299D3 - Skid Steer Loaders
    Gross Power - SAE J1995
     98 HP
    Operating Weight
     11464 lb
  • 2036 mm (80 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.98 yd³
    Width
     80.2 in
    Weight
     705.5 lb
  • TRANSMISSION

     -

    -
  • 3.2m³ (4.25yd³) - Buckets - Loader
    Capacity
     4.25 yd³
    Width
     109 in
    Weight
     2730 lb
  • 2.3m³ (3yd³) - Buckets - Loader
    Capacity
     3 yd³
    Width
     106 in
    Weight
     1802 lb
  • ENGINE

     -

    -
  • 330 GC - Excavators
    Engine Power - ISO 9249
     202 HP
    Operating Weight
     67700 lb
  • R1700 - Underground - Hard Rock
    Gross Power - ISO 14396
     361 HP
    Loaded
     128258 lb
    Nominal Payload Capacity
     33069 lb
  • ATC-900 CONTROLLER - Electric Power
    Rating Range
     120 to 600V, single phase and three phase @ 50/60 Hz
    Transfer Type
     Switch application dependent
    Switch Type
     Switch application dependent
  • T112 Hydraulic Side Shift - Trenchers
    Overall Length
     106.5 in
    Overall Height
     30.9 in
    Overall Width
     74.8 in
  • C15 - Industrial
    Maximum Power
     540 HP
    Rated Speed
     1800-2100 rpm
    Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     2055 kg (4531.5 lb)
  • T109 Hydraulic Side Shift - Trenchers
    Overall Length
     92.4 in
    Overall Height
     30.9 in
    Overall Width
     56.1 in
  • 980 3-Wedge - Couplers - Loader
    Width
     65.9 in
    Height
     34.4 in
    Weight
     2752 lb
  • D6 - Dozers
    Power - Net
     215 HP
    Operating Weight
     50733 lb
  • 1.2 m3 (1.6 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     1.5 yd³
    Width
     81.9 in
    Weight
     1018.8 lb
  • 963D Fusion™ - Couplers - Loader
    Weight
     1413 lb

    -
  • C18 High Ambient Acoustic Enclosure - Generator Set Enclosures

     -

    -
  • B8s - Hammers

     -

    -
  • 260 mm (10 in) - Buckets - Excavator
    Capacity
     1.2 ft³
    Width
     10.2 in
    Weight
     112.2 lb
  • C7.1 - Marine Power Systems
    Maximum Rating
     200 ekW (250 kVA)
    Minimum Rating
     100 ekW (125 kVA)
    Frequency
     50 Hz or 60 Hz
  • 279D3 - Skid Steer Loaders
    Gross Power - SAE J1995
     74.3 HP
    Operating Weight
     10095 lb
  • G332 Demolition & Sorting Grapple: 587-8991 - Grapples
    Capacity
     1.11 yd³
    Weight
     4570 lb
  • 3.4m³ (4.5yd³) Performance Series - Buckets - Loader
    Capacity
     4.5 yd³
    Width
     128 in
    Weight
     5207 lb
  • 1.1 m3 (1.4 yd3) Pin On, Bolt-On Teeth - Buckets - Backhoe Front
    Capacity
     1.4 yd³
    Width
     95.5 in
    Weight
     1722 lb
  • 986H - Couplers - Loader
    Width
     67.5 in
    Height
     33 in
    Weight
     2686 lb
  • 1.6 m3 (2.1 yd3), IT Coupler, Bolt-On Teeth - Buckets - Compact Wheel Loader
    Rated Capacity
     2.4 yd³
    Width
     95.6 in
    Weight
     1300.9 lb
  • 307E2 - Excavators
    Gross Power - ISO 14396
     53.1 HP
    Operating Weight
     16028 lb
  • 19m³ (25yd³) - Buckets - Loader
    Capacity
     25 yd³
    Width
     245 in
    Weight
     47909 lb
  • 3508 - Industrial
    Maximum Power
     1065 HP
    Rated Speed
     1460-1750 rpm
    Weight - Approximate, Net Dry (Basic Operating Engine Without Optional Attachments)
     5355 kg (11805 lb)
  • BP115C - Brooms
    Overall Width
     78.3 in
    Sweeping Width
     60 in
    Brush Diameter
     26 in
  • 2036 mm (80 in) w/Spill Guard, Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.52 yd³
    Width
     80.2 in
    Weight
     1016.3 lb
  • C15 - Industrial
    Maximum Power
     580 HP
    Rated Speed
     1800-2100 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     3673 lb
  • 6.9m³ (9yd³) Serrated Edge - Buckets - Loader
    Capacity
     9 yd³
    Width
     156 in
    Weight
     12421 lb
  • C13 - Industrial
    Maximum Power
     520 HP
    Rated Speed
     1800-2100 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     2520 lb
  • G318 Demolition & Sorting Grapple: 595-1393 - Grapples
    Capacity
     0.78 yd³
    Weight
     2917 lb
  • 1200 mm (47 in) - Buckets - Excavator
    Rated Capacity
     5.6 yd³
    Width
     47.2 in
    Weight
     357.8 lb
  • 2.5 m3 (3.3 yd3), Fusion™ Coupler - Buckets - Loader
    Capacity
     3.2 yd³
    Width
     99.2 in
    Weight
     2120.8 lb
  • 415-444 Backhoe Loaders Manual - Couplers - Backhoe Rear
    Weight
     191.4 lb
    Drive Method
     Mechanical actuator
    Hydraulic Pressure - Coupler
     n/a
  • MP318 Shear Jaw - Multi-Processors
    Length
     1897 in
    Height
     1298 in
    Width
     793 in
  • 986K - Wheel Loaders
    Net Power
     373 HP
    Operating Weight
     98806 lb
    Bucket Capacities
     5-10,3 m³ (6,5-13,5 yd.³)
  • 1.3 m3 (1.7 yd3) - Buckets - Telehandler
    Rated Bucket Capacity
     1.7 yd³
    Width
     72 in
    Bucket Weight
     768 lb
  • 796 AC - Off-Highway Trucks
    Gross Power - SAE J1995
     3500 HP

    -
    Top Speed - Loaded
     40 mile/h
  • G314 Demolition & Sorting Grapple: 587-8963 - Grapples
    Capacity
     0.52 yd³
    Weight - Including Bracket
     2303.83 lb
  • G3412 - Electric Power
    Fuel Type
     Natural Gas
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Emergency Only Stationary Genset
  • B2s - Hammers

     -

    -
  • G217 GC Demolition & Sorting Grapple: 587-8658 - Grapples
    Capacity
     0.78 yd³
    Weight
     1989 lb
  • 2479mm (98in) - Forks
    Fork Width
     98 in
    Inside Height
     78 in
    Weight
     17458 lb
  • CS54B - Compactors
    Gross Power
     131 HP
    Operating Weight - With Cab
     23265 lb
    Compaction Width
     84 in
  • PM312 Wheel Undercarriage - Cold Planers
    Rated Power
     336.6 HP
    Operating Weight
     46886 lb
    Milling Width
     48.2 in
  • 6.8-22 kVA SA Lvl1, Lvl2 & Lvl3 (B Series) - Generator Set Enclosures

     -

    -
  • C7.1 - Marine Power Systems
    Power Range
     298 bkW - 373 bkW (400 bhp - 500 bhp)
    Speed Range
     2900 rpm
    Emissions
     EPA Tier 3 Recreational, IMO II, RCD 2016
  • 1801mm (71in) Ripper - Rippers
    Overall Length
     90.6 in
    Weight
     4597 lb
    Width
     39.1 in
  • 798 AC - Off-Highway Trucks
    Gross Power - SAE J1995
     3500 HP

    -
    Top Speed - Loaded
     40 mile/h
  • 914 mm (36 in) - Buckets - Excavator
    Rated Capacity
     7.8 yd³
    Width
     36 in
    Weight
     321.9 lb
  • C13 Sound Attenuated Enclosure 50 and 60 Hz - Generator Set Enclosures

     -

    -
  • MP332 Concrete Cutter Jaw - Multi-Processors
    Length
     85.6 in
    Height
     1864 mm
    Width
     39.6 in
  • 1.7 m3 (2.2 yd3), IT Coupler, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
     2.4 yd³
    Width
     94.5 in
    Weight
     1393.1 lb
  • 1070 mm (42 in) - Fork Accessories

     -

    -
  • BH150 - Backhoes
    Maximum Digging Depth
     121 in
    Operating Weight
     2255.3 lb
    Overall Length
     109.3 in
  • 2.5m³ (3.3yd³) - Buckets - Loader
    Capacity
     3.25 yd³
    Width
     100 in
    Weight
     2211 lb
  • C18 - Industrial
    Maximum Power
     800 HP
    Rated Speed
     1800-2000
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     3785 lb
  • T109 Hydraulic Side Shift - Trenchers
    Overall Length
     92.4 in
    Overall Height
     30.9 in
    Overall Width
     56.1 in
  • 1.2 m3 (1.6 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     1.6 yd³
    Width
     81.9 in
    Weight
     1015.9 lb
  • 800 mm (32 in) - Buckets - Excavator
    Capacity
     42.5 l
    Width
     31.5 in
    Weight
     89.3 lb
  • 1.5 m3 (2.0 yd3), Pin On, Bolt-On Teeth - Buckets - Compact Wheel Loader
    Rated Capacity
     2.2 yd³
    Width
     95.6 in
    Weight
     1270.1 lb
  • 1829 mm (72 in) - Forks
    Width
     72 in
    Height
     22.9 in
    Weight
     485 lb
  • 3.25m³ (4.25yd³) - Buckets - Loader
    Capacity
     4.25 yd³
    Width
     115 in
    Weight
     3047 lb
  • 4.4m³ (5.75yd³) - Buckets - Loader
    Capacity
     5.75 yd³
    Width
     116 in
    Weight
     4200 lb
  • 1.3 m3 (1.7 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     1.7 yd³
    Width
     81.9 in
    Weight
     1018.8 lb
  • 1730 mm (68 in), Bolt-On Teeth - Buckets - Skid Steer Loader
    Capacity
     0.52 yd³
    Width
     68.1 in
    Weight
     509.3 lb
  • CG132B-16 - Electric Power
    Fuel Type
     Natural Gas, Biogas
    Frequency
     50 / 60 Hz
  • C15 (50 Hz) - Electric Power
    Minimum Rating
     365 kVA
    Maximum Rating
     550 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption, U.S. EPA Certified for Stationary Emergency Use Only (Tier 2 or Tier 3 Nonroad Equivalent Emission Standards), EU Stage IIIA Nonroad Emission Standards, China Nonroad III Emission Standards
  • 1600 mm (63 in) - Buckets - Excavator
    Capacity
     9.9 ft³
    Width
     63 in
    Weight
     306.7 lb
  • 10.7m³ (14yd³) - Buckets - Loader
    Capacity
     14 yd³
    Width
     190 in
    Weight
     20684 lb
  • G3306 - Industrial
    Maximum Power
     211 HP

    -
    Weight - Net Dry
     948 kg (2090 lb)
  • 762 mm (30 in) - Buckets - Excavator
    Rated Capacity
     8.5 yd³
    Width
     30 in
    Weight
     321.9 lb
  • 1.1 m3 (1.4 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     1.4 yd³
    Width
     81.9 in
    Weight
     980 lb
  • 2188 mm (86 in), Bolt-On Teeth - Buckets - Skid Steer Loader
    Capacity
     0.82 yd³
    Width
     86.1 in
    Weight
     670.2 lb
  • 6.5m³ (8.5yd³) Coal Seam - Buckets - Loader
    Capacity
     8.5 yd³
    Width
     150 in
    Weight
     9790 lb
  • GCM34 - Electric Power
    Fuel Type
     Natural Gas
    Frequency At Speed
     50 Hz @ 750/ 60 Hz @ 720
  • Pin Grabber Coupler - Trenching Profile (TB-Linkage): 390-0904 - Couplers - Excavator
    Weight
     2060 lb
    Width - Machine Interface
     25.8 in
    Lifting Eye Working Load Limit
     44092 ton (US)
  • 2.7m³ (3.5yd³) - Buckets - Loader
    Capacity
     3.5 yd³
    Width
     106 in
    Weight
     3494 lb
  • CW16 9-Wheel - Compactors
    Gross Power
     100.5 HP
    Operating Weight - 9 Wheel Base Machine
     11464 lb
    9 Wheel Compaction Width - With Radial Tire
     68 in
  • AD30 - Underground - Hard Rock
    Gross Power - SAE J1995
     409 HP
    Loaded
     132277 lb
    Nominal Payload Capacity
     66139 lb
  • 953K WH - Track Loaders
    Net Power - Rated - ISO 9249/SAE J1349
     154 HP
    Operating Weight
     34024 lb
    Capacity - General Purpose Landfill
     3 yd³
  • 428 - Backhoe Loaders
    Power - Net
     70 HP
    Operating Weight - Nominal
     17926 lb
    Operating Weight - Maximum
     24251 lb
  • 1.14 m3 (1.5 yd3), IT Coupler, Bolt-On Cutting Edge - Buckets - Backhoe Front
    Capacity
     1.5 yd³
    Width
     94.7 in
    Weight
     1184.1 lb
  • CG170-16 K - Electric Power
    Fuel Type
     Natural Gas, Biogas, Coal Gas
    Frequency
     50 or 60 Hz
  • G345 Demolition & Sorting Grapple: 587-8995 - Grapples
    Capacity
     1.31 yd³
    Weight
     6080 lb
  • 3516 (50 Hz) - Electric Power
    Minimum Rating
     1600 kVA
    Maximum Rating
     2000 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption
  • 762 mm (30 in) - Buckets - Excavator
    Rated Capacity
     10.9 yd³
    Width
     30 in
    Weight
     491.6 lb
  • C280-8 Tier 4 - Marine Power Systems
    Power Range
     3299-3634 bhp (2460-2530 bkW)
    Speed Range
     1000 rpm
    Emissions
     EPA Tier 4, IMO III
  • DG60-2 (3 Phase) - Electric Power
    Fuel System
     Natural Gas / LP Vapor
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • 3054C - Industrial
    Maximum Power
     130 HP
    Rated Speed
     2200-2400 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     291-306 kg (640-674.6 lb)
  • 1200 mm (47 in), Pin On - Buckets - Backhoe Rear
    Capacity
     14.6 ft³
    Width
     47.2 in
    Weight
     632.7 lb
  • 637K - Wheel Tractor-Scrapers
    Flywheel Power - Tractor/Scraper
     570 HP
    Scraper Capacity - Heaped
     34 yd³
    Top Speed - Loaded
     34.7 mile/h
  • 816 - Compactors
    Gross Power (SAE J1995:2014)
     284 HP
    Operating Weight
     57345 lb
  • 303E CR - Excavators
    Gross Power
     24.8 HP
    Operating Weight with Cab - Long Stick
     7296 lb
  • 914 mm (36 in) Extension - Auger Accessories

     -

    -
  • 1.3 m3 (1.7 yd3), Pin On, Bolt-On Teeth - Buckets - Compact Wheel Loader
    Rated Capacity
     2 yd³
    Width
     95.6 in
    Weight
     1184.1 lb
  • G3512E - Electric Power
    Fuel Type
     Natural Gas
    Frequency
     50 Hz
  • 907M Ag Handler - Wheel Loaders
    Rated Net Power - 2,500 rpm - SAE J1349
     68 HP
    Operating Weight
     12958 lb
    Bucket Capacities
     0.75-1.2 m3 (1.0-1.6 yd3)
  • M 25 C - Marine Power Systems
    Maximum Rating
     2877 kWe (3600 kVA)
    Minimum Rating
     1669 kWe (2088 kVA)
  • 259D3 - Skid Steer Loaders
    Gross Power - SAE J1995
     74.3 HP
    Operating Weight
     8987 lb
  • 3516C - Industrial
    Maximum Power
     2100 HP
    Rated Speed
     1750 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     7840 kg (17284 lb)
  • 914 mm (36 in) - Buckets - Excavator
    Rated Capacity
     7.1 yd³
    Width
     36 in
    Weight
     293.2 lb
  • 3516C (50 Hz) - Electric Power
    Minimum Rating
     2250 kVA
    Maximum Rating
     3125 kVA
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Use Only (Tier 2 Nonroad Equivalent Emission Standards)
  • 457 mm (18 in), Pin On - Buckets - Backhoe Rear
    Capacity
     4.2 ft³
    Width
     18 in
    Weight
     284.4 lb
  • 315F L - Excavators
    Gross Power - SAE J1995
     74 kW (100 hp/101 PS)
    Operating Weight
     37794 lb
  • 2.44 m (8 ft) - Snow Pushes
    Weight
     350.1 lb
    Overall Height
     16 in
    Working Width
     96 in
  • PM313 Wheel Undercarriage - Cold Planers
    Rated Power
     336.6 HP
    Operating Weight
     47115 lb
    Milling Width
     51.2 in
  • 762 mm (30 in), Pin On - Buckets - Backhoe Rear
    Capacity
     6.7 ft³
    Width
     30 in
    Weight
     440.9 lb
  • 4m³ (5.25yd³) - Buckets - Loader
    Capacity
     5.25 yd³
    Width
     120 in
    Weight
     2835 lb
  • 986K Block Handler Arrangement - Wheel Loaders
    Net Power
     373 HP
    Operating Weight
     116688 lb
    Bucket Capacities
     5.4 m³ (7 yd³)
  • 2.5m³ (3.25yd³) - Buckets - Loader
    Capacity
     3.25 yd³
    Width
     100 in
    Weight
     2211 lb
  • 773G - Off-Highway Trucks
    Gross Power - SAE J1995
     775 HP
    Nominal Payload Class (100%)
     61.7 ton (US)
    Top Speed - Loaded
     42 mile/h
  • G313 GC Demolition & Sorting Grapple: 587-8718 - Grapples
    Capacity
     0.59 yd³
    Weight - Including Bracket
     3053.4 lb
  • 3.66 m (12 ft) - Snow Pushes
    Weight
     509.9 lb
    Overall Height
     16 in
    Working Width
     144 in
  • 3516 - Industrial
    Maximum Power
     2000 HP
    Rated Speed
     1200-1800 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     7484 kg (16,499 lb)
  • PR184 Hydraulic Angle - Rakes
    Overall Width
     93 in
    Weight
     1049.4 lb
    Overall Length
     64 in
  • 914M - Wheel Loaders
    Net Power
     97 HP
    Operating Weight
     19315 lb
    Bucket Capacities
     1.3-1.9 m3 (1.7-2.5 yd3)
  • 508 mm (20 in) - Buckets - Excavator
    Rated Capacity
     5.1 yd³
    Width
     20 in
    Weight
     240.3 lb
  • 352F - Excavators
    Engine Power - ISO 9249
     417 HP
    Operating Weight
     112200 lb
  • 1000 mm (39 in) - Buckets - Excavator
    Rated Capacity
     6.11 yd³
    Width
     39.4 in
    Weight
     181.4 lb
  • 457 mm (18 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     6.4 ft³
    Width
     18 in
    Weight
     357.1 lb
  • C2.8 - Industrial
    Maximum Power
     74 HP
    Rated Speed
     2200-2400 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     320 kg (705 lb)
  • 3.2m³ (4.25yd³) - Buckets - Loader
    Capacity
     4.25 yd³
    Width
     115 in
    Weight
     2775 lb
  • 966M XE - Wheel Loaders
    Maximum Net Power - 1,600 rpm - ISO 9249
     298 HP
    Operating Weight
     51176 lb
    Bucket Capacities
     3.20-7.40 m³ (4.19-9.68 yd³)
  • 1.4 m3 (1.8 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
     2 yd³
    Width
     94.5 in
    Weight
     1276 lb
  • T109 Manual Side Shift - Trenchers
    Overall Length
     92.4 in
    Overall Height
     30.9 in
    Overall Width
     56.1 in
  • G312 GC Demolition & Sorting Grapple: 587-8713 - Grapples
    Capacity
     0.52 yd³
    Weight - Including Bracket
     2281.78 lb
  • G3520/G3520B - Industrial
    Maximum Power
     1725 HP

    -
    Weight - Net Dry
     11168 kg (24622 lb)
  • CS78B - Compactors
    Gross Power
     173.7 HP
    Operating Weight - With Cab
     41214 lb
    Compaction Width
     84 in
  • H180 S - Hammers
    Impact Energy Class
     12000 ft·lbf
    Blows per Minute
     275-450
    Maximum Operating Weight
     9570 lb
  • 6.4m³ (8.3yd³) Performance Series - Buckets - Loader
    Capacity
     8.3 yd³
    Width
     158 in
    Weight
     10877 lb
  • G3516B - Electric Power
    Fuel Type
     Natural Gas
    Frequency
     60 Hz
  • Retrieval Winch - Winches
    Weight
     1350 lb
    Maximum Line Pull - Full Drum
     32150 lb
    Maximum Line Speed - Full Drum
     50 ft/min
  • 1730 mm (68 in) - Buckets - Skid Steer Loader
    Capacity
     0.68 yd³
    Width
     68.1 in
    Weight
     804.7 lb
  • 1495mm (59in) Ripper - Rippers
    Overall Length
     77.9 in
    Weight
     3391 lb
    Width
     32 in
  • DG230 GC (3 phase) - Electric Power

     -
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • 6.4m³ (8.3yd³) Performance Series - Buckets - Loader
    Capacity
     8.3 yd³
    Width
     158 in
    Weight
     10759 lb
  • 762 mm (30 in), Pin On - Buckets - Backhoe Rear
    Capacity
     8.2 ft³
    Width
     30 in
    Weight
     368.2 lb
  • 2.7 m3 (3.5 yd3), Pin On - Buckets - Loader
    Capacity
     3.5 yd³
    Width
     107.4 in
    Weight
     2250.9 lb
  • C3.6 - Industrial
    Maximum Power
     134 HP
    Rated Speed
     2000-2400 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     840 lb
  • 3516C Industrial Power Unit - Industrial
    Maximum Power
     2100 HP
    Rated Speed
     1750 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     7840 kg (17,284 lb)
  • S3090 Rotating Scrap & Demolition Shear - Shears
    Length
     211 in
    Height
     71 in
    Width
     51 in
  • 610 mm (24 in) - Augers
    Diameter
     24 in
    Weight
     149.9 lb
    Overall Length
     48 in
  • C32 ACERT Tier 3 - Marine Power Systems
    Maximum Rating
     940 ekW (1175 kVA)
    Minimum Rating
     730 ekW (913 kVA)
    Frequency
     60hz
  • 914 mm (36 in), Pin On - Buckets - Backhoe Rear
    Capacity
     10.3 ft³
    Width
     36 in
    Weight
     363.8 lb
  • 352F LRE - Excavators
    Gross Power - SAE J1995
     322 kW (438 PS)
    Operating Weight
     130955 lb
  • GSH420 4-Tine, 600-Liter Orange Peel Grapple - Grapples
    Capacity
     0.75 yd³
    Operating Weight
     2573 lb
  • C9.3 - Industrial
    Maximum Power
     400 HP
    Rated Speed
     1800-2200 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     1950 lb
  • CS76B - Compactors
    Gross Power
     173.7 HP
    Operating Weight - With Cab
     38450 lb
    Compaction Width
     84 in
  • 301.5 - Excavators
    Gross Power - ISO 14396
     21.6 HP
    Operating Weight
     3913 lb
  • 301.8 - Excavators
    Gross Power - ISO 14396
     21.6 HP
    Operating Weight
     4473 lb
  • 906M - Wheel Loaders
    Net Power
     74 HP
    Operating Weight
     12346 lb
    Bucket Capacities
     0.75-1.5 m3 (1.0-2.0 yd3)
  • 1500 mm (59 in) - Buckets - Excavator
    Rated Capacity
     11.65 yd³
    Width
     59.1 in
    Weight
     491.4 lb
  • 3.1m³ (4yd³) - Buckets - Loader
    Capacity
     4 yd³
    Width
     117 in
    Weight
     3565 lb
  • UNINTERRUPTIBLE POWER SUPPLY (UPS) BATTERIES

     -

    -
  • C32 ACERT Tier 3 Recreational - Marine Power Systems
    Power Range
     1600-1900 bhp (1193-1417 bkW)
    Speed Range
     2300 rpm
    Emissions
     EPA Tier 3, IMO II, EU IW
  • 938M - Wheel Loaders
    Rated Net Power
     182 HP
    Operating Weight
     35778 lb
    Bucket Capacities
     2.5-5.0 m³ (3.2-6.5 yd³)
  • BR118 - Brushcutters
    Overall Width
     74 in
    Cutting Width
     72 in
    Maximum Cutting Diameter
     3 in
  • SW360B, 152 mm (6 in) - Saws
    Length
     93 in
    Overall Height
     70 in
    Overall Width
     73 in
  • 1.1 m3 (1.4 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Backhoe Front
    Capacity
     1.4 yd³
    Width
     89.1 in
    Weight
     1162 lb
  • AP500F - Asphalt Pavers
    Gross Power
     142 HP
    Operating Weight - Paver Only
     29020 lb
    Standard Paving Range - SE50 V, SE50 VT
     2.55 - 5.0 m (8' 4" - 16' 4")
  • 3.05 m (10 ft) - Snow Pushes
    Weight
     866.4 lb
    Overall Height
     36 in
    Working Width
     120 in
  • 1226 mm (48 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     27 ft³
    Width
     48.3 in
    Weight
     1053.8 lb
  • 305 mm (12 in) Extension - Auger Accessories

     -

    -
  • 4.2 m3 (5.5 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     5.5 yd³
    Width
     108.1 in
    Weight
     3174.7 lb
  • C15 - Industrial
    Maximum Power
     580 HP
    Rated Speed
     1800-2100 rpm
    Weight - Approximate, Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     2113-2650 kg (4658-5842 lb)
  • 6.4m³ (8.3yd³) Performance Series - Buckets - Loader
    Capacity - Adapters
     8.3 yd³
    Width
     161 in
    Weight
     14021 lb
  • 814K - Dozers
    Net Power
     248 HP
    Operating Weight
     48390 lb
  • CTX Series Automatic Transfer Switch - Electric Power
    Rating Range
     40-400A
    Transfer Type
     Open transition
    Switch Type
     Contactor Based
  • 993K - Wheel Loaders
    Net Power
     973 HP
    Operating Weight
     294687 lb
    Bucket Capacities
     12.2-23.7 m3 (16.0-31.0 yd3)
  • CW-45S - Couplers - Excavator
    Weight
     880 lb
    Width
     22 in
    Load Rating, Hoisting Hook
     15.4 ton (US)
  • 730 EJ - Articulated Trucks
    Gross Power - SAE J1995
     375 HP
    Rated Payload
     30 ton (US)
    Heaped (SAE 2:1)
     22.1 yd³
  • CB2.9 - Compactors
    Gross Power
     30.7 HP
    Operating Weight
     5952 lb
    Standard Compaction Width
     51 in
  • 38.23 m³ (50.0 yd³) - Blades
    Capacity
     50 yd³
    Width
     214 in
  • C32 IMO II - Marine Power Systems
    Maximum Rating
     1333 BHP
    Minimum Rating
     791 BHP
    Aspiration
     TTA
  • C12 - Marine Power Systems
    Power Range
     340-490 bhp (254-366 bkW)
    Speed Range
     1800-2300 rpm
    Emissions
     IMO I, IMO II
  • C18 (50 Hz) - Electric Power
    Minimum Rating
     550 kVA
    Maximum Rating
     715 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption, U.S. EPA Certified for Stationary Emergency Use Only (Tier 2 Nonroad Equivalent Emission Standards), China Nonroad III Emission Standards
  • 74.93 m³ (98.0 yd³) - Blades
    Capacity
     98 yd³
    Width
     322 in
  • 18 - Motor Graders
    Base Power (1st Gear) - Net
     304 HP
    Operating Weight - Typically Equipped
     74324 lb
    Blade Width
     18 ft
  • 2.9m³ (3.75yd³) - Buckets - Loader
    Capacity
     3.75 yd³
    Width
     106 in
    Weight
     2127 lb
  • 434F2 - Backhoe Loaders
    Power - Net
     95 HP
    Operating Weight - Nominal
     20408 lb
    Operating Weight - Maximum
     25353 lb
  • 2.5 m3 (3.3 yd3), Pin On - Buckets - Loader
    Capacity
     3.2 yd³
    Width
     107.4 in
    Weight
     2156.1 lb
  • 14.5m³ (19yd³) - Buckets - Loader
    Capacity
     19 yd³
    Width
     200 in
    Weight
     31260 lb
  • HM210 - Mulchers
    Overall Width
     48.3 in
    Weight
     1190.5 lb
    Required Hydraulics
     Standard Flow
  • 326 - Excavators
    Engine Power - ISO 9249
     201 HP
    Operating Weight
     57100 lb
  • QS332

     -

    -
  • 305 mm (12 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     4.6 ft³
    Width
     12 in
    Weight
     295.4 lb
  • DE200 GC (60 Hz) - Electric Power
    Minimum Rating
     175 ekW
    Maximum Rating
     175 ekW
    Emissions/Fuel Strategy
     Non Regulated
  • MP318 Demolition Jaw - Multi-Processors
    Length
     76 in
    Height
     54 in
    Width
     31 in
  • 1290mm (51in) Ripper - Rippers
    Overall Length
     67 in
    Weight
     1717 lb
    Width
     22.4 in
  • CW-40S - Couplers - Excavator
    Weight
     473 lb
    Width
     16.8 in
    Load Rating, Hoisting Hook
     11 ton (US)
  • 994K - Wheel Loaders
    Net Power
     1739 HP
    Operating Weight
     534852 lb
    Bucket Capacities
     19.1-43.6 m3 (25-57 yd3)
  • 836K - Compactors
    Gross Power
     562 HP
    Operating Weight
     123319 lb
  • 3.66 m (12 ft) - Snow Pushes
    Weight
     1402.1 lb
    Overall Height
     39.1 in
    Working Width
     144 in
  • 990K - Wheel Loaders
    Net Power
     699 HP
    Operating Weight
     178517 lb
    Bucket Capacities
     7,4-14,9 m³ (9,7-19,5 yd³)
  • C9 ACERT SA and WP Enclosure 180- 300 60 Hz US sourced - Generator Set Enclosures

     -

    -
  • PM313 Track Undercarriage - Cold Planers
    Rated Power
     336.6 HP
    Operating Weight
     48658 lb
    Milling Width
     51.2 in
  • 260 mm (10 in) - Buckets - Excavator
    Capacity
     1 ft³
    Width
     10.2 in
    Weight
     103.4 lb
  • QH441/HS

     -

    -
  • QA331

     -

    -
  • C27 - Industrial
    Maximum Power
     1150 HP
    Rated Speed
     1800-2100 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     2946 kg (6495 lb)
  • 6.4m³ (8.3yd³) Performance Series - Buckets - Loader
    Capacity - Adapters
     8.3 yd³
    Width
     161 in
    Weight
     13966 lb
  • G318 WH Demolition & Sorting Grapple: 587-8970 - Grapples
    Capacity
     1.31 yd³
    Weight - Including Bracket
     5764 lb
  • 3.0 m3 (3.9 yd3), Fusion™, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     3.9 yd³
    Width
     99.5 in
    Weight
     3763.3 lb
  • M316F (2017) - Excavators

     -
    Operating Weight*
     15 910 to 17 850 kg (35,076 to 39,352 lb)
  • 10m³ (13yd³) Iron Ore - Buckets - Loader
    Capacity
     13 yd³
    Width
     203 in
    Weight
     30940 lb
  • H120 S - Hammers
    Impact Energy Class
     3500 ft·lbf
    Blows per Minute
     350-620
    Maximum Operating Weight
     4101 lb
  • 1.07 m3 (1.4 yd3), Pin On - Buckets - Backhoe Front
    Capacity
     1.4 yd³
    Width
     89.1 in
    Weight
     1011.9 lb
  • 330F L (2017) - Excavators

     -
    Operating Weight
     67748 lb
  • QA451/e

     -

    -
  • 31.3m³ (41yd³) - Buckets - Loader
    Capacity
     41 yd³
    Width
     245 in
    Weight
     48864 lb
  • CW-20S - Couplers - Excavator
    Weight
     418 lb
    Width
     16.8 in
    Load Rating, Hoisting Hook
     11 ton (US)
  • 25m³ (32.7yd³) Iron Ore - Buckets - Mining Shovels

     -

    -
  • 3512 (50 Hz) - Electric Power
    Minimum Rating
     1000 kVA
    Maximum Rating
     1400 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption
  • AP555F - Asphalt Pavers
    Gross Power
     142 HP
    Operating Weight - Paver Only
     30430 lb
    Standard Paving Range - SE50 V, SE50 VT
     2.55 - 5.0 m (8' 4" - 16' 4")
  • 400 mm (16 in) - Buckets - Excavator
    Capacity
     1.2 ft³
    Width
     15.7 in
    Weight
     78 lb
  • 982M - Wheel Loaders
    Net Power - ISO 9249
     398 HP
    Operating Weight
     78402 lb
    Bucket Capacities
     4.6-12.0 m³ (6.0-15.75 yd³)
  • 6.9m³ (9yd³) Performance Series - Buckets - Loader
    Capacity
     9 yd³
    Width
     158 in
    Weight
     11235 lb
  • M 25 C - Marine Power Systems
    Power Range
     1740-3000 kW
    Speed Range
     720-750 rpm
    Emissions
     IMO II
  • GSH455 4-Tine, 1500-Liter Orange Peel Grapple - Grapples
    Capacity
     2 yd³
    Operating Weight
     5763 lb
  • 772G - Off-Highway Trucks
    Gross Power - SAE J1995
     605 HP
    Nominal Payload Class (100%)
     51.6 ton (US)
    Top Speed - Loaded
     49.2 mile/h
  • General Duty Bucket 1300 mm (51 in): 550-9670 - Buckets - Excavator
    Capacity
     1.7 yd³
    Width
     51 in
    Weight
     1709 lb
  • 13m³ (17yd³) - Buckets - Loader
    Capacity
     17 yd³
    Width
     200 in
    Weight
     29435 lb
  • CV119 - Compactors
    Drum Width
     73 in
    Weight
     2138.5 lb
    Required Hydraulics
     Standard Flow
  • C280-16 - Marine Power Systems
    Power Range
     6169-7577 bhp (4600-5650 bkW)
    Speed Range
     900-1000 rpm
    Emissions
     IMO II
  • 1.9 m3 (2.5 yd3), ISO Coupler, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
     2.6 yd³
    Width
     94.5 in
    Weight
     1470 lb
  • D7E - Dozers
    Flywheel Power
     238 HP
    Operating Weight
     57441 lb
  • C4.4 - Industrial
    Maximum Power
     173.5 HP
    Rated Speed
     2200 rpm
    Weight - Approximate, Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     670-700 kg (1477-1543 lb)
  • 1730 mm (68 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.48 yd³
    Width
     68.1 in
    Weight
     511.5 lb
  • 3608 - Industrial
    Maximum Power
     3300 HP
    Rated Speed
     800-1000 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     19,000 kg (41,800 lb)
  • 300.9D - Excavators
    Gross Power - ISO 14396
     18 HP
    Operating Weight - With Safety Frame
     2170 lb
  • CTE Series Automatic Transfer Switch - Electric Power
    Rating Range
     40-4000A
    Transfer Type
     Open / Closed / 4 position switch
    Switch Type
     Contactor Based
  • WEAR PROTECTION

     -

    -
  • 19m³ (25yd³) - Buckets - Loader
    Capacity
     25 yd³
    Width
     222 in
    Weight
     46821 lb
  • HMF110 - Flail Mowers

     -

    -
  • 21.41 m³ (28.0 yd³) - Blades
    Capacity
     28 yd³
    Width
     218 in
  • 1576 mm (62 in) w/Spill Guard, Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.39 yd³
    Width
     62 in
    Weight
     851 lb
  • 3505mm (138 in) Cushion Dozer - Blades
    Width
     138 in
    Height
     70 in
  • GSH425 4-Tine, 950-Liter Orange Peel Grapple - Grapples
    Capacity
     1.25 yd³
    Operating Weight
     3545 lb
  • 1.0 m3 (1.3 yd3), IT Coupler - Buckets - Backhoe Front
    Capacity
     1.3 yd³
    Width
     89.1 in
    Weight
     1548.9 lb
  • 610 mm (24 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     7.3 ft³
    Width
     24 in
    Weight
     370.4 lb
  • 762 mm (30 in), Pin On - Buckets - Backhoe Rear
    Capacity
     12.4 ft³
    Width
     30 in
    Weight
     610.7 lb
  • 4.87 m (16 ft) - Snow Pushes
    Weight
     3112.9 lb
    Overall Height
     42.8 in
    Working Width
     192 in
  • 8.2m³ (10.75yd³) Performance Series - Buckets - Loader
    Capacity
     10.75 yd³
    Width
     143 in
    Weight
     7970 lb
  • 335 - Excavators

     -
    Operating Weight
     77000 lb
  • 305E2 CR - Excavators
    Gross Power - ISO 14396
     41.8 HP
    Operating Weight
     11443 lb
  • 229 mm (9 in) - Augers
    Diameter
     9 in
    Weight
     72.8 lb
    Overall Length
     48 in
  • 257D - Compact Track and Multi Terrain Loaders
    Gross Power
     74.3 HP
    Operating Weight
     8048 lb
  • 2.3 m3 (3.0 yd3), Fusion™ Coupler - Buckets - Loader
    Capacity
     3 yd³
    Width
     100 in
    Weight
     1902.6 lb
  • 2.1 m3 (2.7 yd3), Fusion™ Coupler - Buckets - Loader
    Capacity
     2.7 yd³
    Width
     100 in
    Weight
     1818.8 lb
  • 1883 mm (74 in), Bolt-On Teeth - Buckets - Skid Steer Loader
    Capacity
     0.58 yd³
    Width
     74.1 in
    Weight
     549 lb
  • 3612 - Industrial
    Maximum Power
     4962 HP
    Rated Speed
     750-1000 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     25,140 kg (55,300 lb)
  • 1.1 m3 (1.4 yd3) Pin On - Buckets - Backhoe Front
    Capacity
     1.4 yd³
    Width
     95.5 in
    Weight
     2002.9 lb
  • 1.0 m3 (1.3 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     1.3 yd³
    Width
     74.4 in
    Weight
     862 lb
  • 1220 mm (48 in) - Fork Accessories

     -

    -
  • 1270 mm (50 in) - Fork Accessories

     -

    -
  • MH3022 - Material Handlers
    Maximum Net Power - SAE J1349/ISO 9249
     126 kW (169 hp [171 hp/PS*])
    Operating Weight
     21 815-22 930 kg (48,094-50,552 lb)
    Maximum Reach
     33.92 ft
  • S3035 Rotating Scrap & Demolition Shear - Shears
    Length
     137 in
    Height
     49.6 in
    Width
     29.5 in
  • 289D3 - Skid Steer Loaders
    Gross Power - SAE J1995
     74.3 HP
    Operating Weight
     10688 lb
  • 3 m3 (3.9 yd3) - Buckets - Telehandler
    Rated Bucket Capacity
     3.9 yd³
    Width
     106 in
    Bucket Weight
     1320 lb
  • 3.05 m (10 ft) - Snow Pushes
    Weight
     1201.5 lb
    Overall Height
     39.1 in
    Working Width
     120 in
  • 3516C Tier 3 - Marine Power Systems
    Power Range
     2131-2675 bhp (1590-1995 bkW)
    Speed Range
     1600 rpm
    Emissions
     EPA Tier 3, IMO II
  • 65.75 m³ (86.0 yd³) - Blades
    Capacity
     86 yd³
    Width
     290 in
  • C13, C15, C18 SA enclosure. 350-600 kW 60 Hz - Generator Set Enclosures

     -

    -
  • 6.4m³ (8.33yd³) - Buckets - Loader
    Capacity
     8.33 yd³
    Width
     157 in
    Weight
     16826 lb
  • 2.7m³ (3.5yd³) - Buckets - Loader
    Capacity
     3.5 yd³
    Width
     106 in
    Weight
     2046 lb
  • 1042 mm (41 in) - Fork Accessories

     -

    -
  • MP324 Shear Jaw - Multi-Processors
    Length
     2082 in
    Height
     1419 in
    Width
     793 in
  • VM 32 C - Marine Power Systems
    Power Range
     6000-8000 kW
    Speed Range
     720-750 rpm
    Emissions
     IMO II
  • 2.5m³ (3.25yd³) - Buckets - Loader
    Capacity
     3.25 yd³
    Width
     106 in
    Weight
     2101 lb
  • 10m³ (13yd³) Performance Series - Buckets - Loader
    Capacity
     13 yd³
    Width
     182 in
    Weight
     16528 lb
  • 619 mm (24 in) - Buckets - Excavator
    Rated Capacity
     4.6 yd³
    Width
     24.4 in
    Weight
     233.7 lb
  • 30-220 kVA SA Lvl 1 Enclosure - Generator Set Enclosures

     -

    -
  • C32 ACERT IMO II - Marine Power Systems
    Power Range
     660-1450 bhp (492-1081 bkW)
    Speed Range
     1600-2300 rpm
    Emissions
     IMO II, EU IW
  • PM620 - Cold Planers
    Rated Power
     630 HP
    Operating Weight
     73480 lb
    Milling Width
     79.1 in
  • 1219 mm (48 in) - Forks
    Fork Tine Width
     4 in
    Fork Tine Thickness
     2 in
    Fork Tine Length
     48 in
  • A23 - Augers
    Drive Shaft Torque at Maximum Pressure
     1699.3 lb/ft
    Drive Method
     Gerotor Motor - Direct Drive
    Mounting Bracket Design
     Mini Excavator
  • 3412C - Industrial
    Maximum Power
     739 HP
    Rated Speed
     1750-2100 rpm
    Weight - Approximate, Net Dry (Basic Operating Engine Without Optional Attachments)
     2579 kg (5686 lb)
  • M 25 E - Marine Power Systems
    Power Range
     2100-3150 kW
    Speed Range
     720-750 rpm
    Emissions
     IMO II / IMO III with SCR
  • MP332 Demolition Jaw - Multi-Processors
    Length
     89 in
    Height
     79 in
    Width
     40 in
  • C32 Tier 4 / IMO III - Marine Power Systems
    Maximum Rating
     940 ekW
    Minimum Rating
     282 ekW
    Frequency
     60hz
  • SE50 VT Tamper Bar Screed - Asphalt Pavers
    Standard Weight
     7363 lb
    Standard Paving Range
     2.55 - 5.0 m (8' 4" - 16' 4")
  • 259D - Compact Track and Multi Terrain Loaders
    Gross Power
     74.3 HP
    Operating Weight
     8945 lb
  • 457 mm (18 in), Pin On - Buckets - Backhoe Rear
    Capacity
     6.4 ft³
    Width
     18 in
    Weight
     321.9 lb
  • G318 Demolition & Sorting Grapple: 587-8966 - Grapples
    Capacity
     1.11 yd³
    Weight - Including Bracket
     4664 lb
  • T109 Manual Side Shift - Trenchers
    Overall Length
     92.4 in
    Overall Height
     30.9 in
    Overall Width
     56.1 in
  • HF201B - Felling Heads

     -

    -
  • BR218 - Brushcutters
    Overall Width
     74 in
    Cutting Width
     72 in
    Maximum Cutting Diameter
     3 in
  • XG400 - Electric Power
    Frequency
     60Hz
    Rating
     135 ekW (170 kVA) Continuous
  • PREMIUM HIGH OUTPUT BATTERIES

     -

    -
  • 1.6 m3 (2.1 yd3), Fusion™ Coupler, Bolt-On Teeth - Buckets - Compact Wheel Loader
    Rated Capacity
     2.2 yd³
    Width
     95.9 in
    Weight
     1426.4 lb
  • 2.7 m3 (3.5 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     3.5 yd³
    Width
     108.1 in
    Weight
     2667.6 lb
  • 3516E - Marine Power Systems

     -

    -
    Aspiration
     TA
  • 6.9 m³ (9.0 yd³) - Blades
    Capacity
     9 yd³
    Width
     168 in
  • PC404 - Cold Planers
    Working Width
     17.7 in
    Maximum Cutting Depth
     4.9 in
    Required Hydraulics
     Standard Flow
  • C11 - Industrial
    Maximum Power
     385 HP
    Rated Speed
     1800-2100 rpm
    Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     1692 kg (3730 lb)
  • 300 mm (12 in) - Buckets - Excavator
    Capacity
     0.8 ft³
    Width
     11.8 in
    Weight
     68.6 lb
  • C18 Sound Attenuated Enclosure 50 and 60 Hz - Generator Set Enclosures

     -

    -
  • 216B3 - Skid Steer Loaders
    Gross Power - SAE J1995
     51 HP
    Operating Weight
     5690 lb
    Rated Operating Capacity
     1400 lb
  • 914 mm (36 in) - Fork Accessories

     -

    -
  • 1.0 m3 (1.3 yd3) Pin On, Bolt-On Cutting Edge - Buckets - Backhoe Front
    Capacity
     1.29 yd³
    Width
     89.1 in
    Weight
     1718.9 lb
  • 1.15 m3 (1.5 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Backhoe Front
    Capacity
     1.5 yd³
    Width
     94.7 in
    Weight
     1241 lb
  • HM208 - Mulchers
    Overall Width
     40.4 in
    Weight
     1080.3 lb
    Required Hydraulics
     Standard Flow
  • H140GC S - Hammers
    Impact Energy Class
     5531 ft-lb
    Blows per Minute
     250-550
    Maximum Operating Weight
     6894.8 lb
  • G3406 - Electric Power
    Fuel Type
     Natural Gas, Biogas, Field Gas, Propane
    Frequency
     50 or 60 Hz
  • 1.1 m3 (1.4 yd3) Pin On - Buckets - Backhoe Front
    Capacity
     1.4 yd³
    Width
     95.5 in
    Weight
     1655 lb
  • C18 Tier 3 - Marine Power Systems
    Maximum Rating
     803 BHP
    Minimum Rating
     624 BHP
    Aspiration
     TA, TTA
  • 762 mm (30 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     9.9 ft³
    Width
     30 in
    Weight
     443.1 lb
  • D3K2 Mulcher - Dozers
    Power - Net
     104 HP
    Operating Weight - XL
     23746 lb
  • DFS121 - Silage Defacers
    Weight
     1051.6 lb
    Overall Height
     25.2 in
    Overall Width
     84.5 in
  • VM 46 DF - Marine Power Systems
    Maximum Rating
     14807 kWe (18528 kVA)
    Minimum Rating
     10357 kWe (12960 kVA)
  • G324 WH Demolition & Sorting Grapple: 587-8986 - Grapples
    Capacity
     2.35 yd³
    Weight
     4639 lb
  • 4.2m³ (5.5yd³) - Buckets - Loader
    Capacity
     5.5 yd³
    Width
     116 in
    Weight
     3800 lb
  • 1120 mm (44 in) - Fork Accessories

     -

    -
  • 1730 mm (68 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Width
     68.1 in
    Height - Grapples Closed
     20.7 in
    Jaw Opening
     40 in
  • 1829 mm (72 in) - Forks
    Width
     72 in
    Height - Grapples Closed
     32 in
    Weight
     1208.1 lb
  • SE50 V Vibratory Screed - Asphalt Pavers
    Standard Weight
     7239 lb
    Standard Paving Range
     2.55 - 5.0 m (8' 4" - 16' 4")
  • 1.0 m3 (1.3 yd3) Pin On - Buckets - Backhoe Front
    Capacity
     1.29 yd³
    Width
     89.1 in
    Weight
     1957.9 lb
  • ATC Contactor Based Bypass Isolation Automatic Transfer Switch - Electric Power
    Rating Range
     100 to 1200A
    Transfer Type
     Bypass Isolation
    Switch Type
     Contactor Based
  • B4s - Hammers

     -

    -
  • C2.2 - Marine Power Systems
    Maximum Rating
     27 ekW (27 kVA)
    Minimum Rating
     16 ekW (16kVA)
    Frequency
     50 Hz or 60 Hz
  • 619 mm (24 in) - Buckets - Excavator
    Rated Capacity
     6.4 yd³
    Width
     24.4 in
    Weight
     271.2 lb
  • G324 WH Demolition & Sorting Grapple: 587-8985 - Grapples
    Capacity
     1.96 yd³
    Weight
     4418 lb
  • G213 GC Demolition & Sorting Grapple: 587-8652 - Grapples
    Capacity
     0.59 yd³
    Weight
     1526 lb
  • GSH520 5-Tine, 600-Liter Orange Peel Grapple - Grapples
    Capacity
     0.75 yd³
    Operating Weight
     3073 lb
  • CP44B - Compactors
    Gross Power
     100.6 HP
    Operating Weight - With Cab
     16471 lb
    Compaction Width
     66 in
  • 1.0 m3 (1.3 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     1.3 yd³
    Width
     80.5 in
    Weight
     910.1 lb
  • C3.6 for Tractors - Industrial
    Maximum Power
     121 HP
    Rated Speed
     2200-2400 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     840 lb
  • 3.66 m (12 ft) - Snow Pushes
    Weight
     2786.6 lb
    Overall Height
     42.8 in
    Working Width
     144 in
  • ATC Contactor-Based Automatic Transfer Switch - Electric Power
    Rating Range
     40-1600A
    Transfer Type
     Open / Closed Transition
    Switch Type
     Contactor Based
  • 2007 mm (79 in) - Blades
    Overall Width
     79 in
    Length
     40.5 in
  • Pin Grabber Coupler - Narrow Profile (DB-Linkage): 388-9724 - Couplers - Excavator
    Weight
     1376 lb
    Width - Machine Interface
     23.2 in
    Lifting Eye Working Load Limit
     30865 ton (US)
  • BR117 - Brushcutters
    Overall Width
     68 in
    Cutting Width
     66 in
    Maximum Cutting Diameter
     3 in
  • 340 Long Reach - Excavators
    Gross Power - ISO 14396
     314 HP
    Operating Weight
     96700 lb
  • MP332 Universal Jaw - Multi-Processors
    Length
     90.7 in
    Height
     73.5 in
    Width
     39.6 in
  • 3.25m³ (4.25yd³) - Buckets - Loader
    Capacity
     4.25 yd³
    Width
     117 in
    Weight
     3611 lb
  • CW-20 - Couplers - Excavator
    Weight
     418 lb
    Width
     22 in
    Load Rating, Hoisting Hook
     11 ton (US)
  • G3512 750 ekW - Electric Power
    Fuel Type
     Natural Gas
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Non-Emergency Stationary Genset
  • 152 mm (6 in) - Augers
    Diameter
     6 in
    Weight
     50.7 lb
    Overall Length
     48.7 in
  • 3512 (50 Hz) with Upgradeable Package - Electric Power
    Minimum Rating
     1000 kVA
    Maximum Rating
     1400 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption, Low Emissions
  • 725 - Articulated Trucks
    Gross Power - SAE J1995
     342 HP
    Rated Payload
     26.5 ton (US)
    Heaped (SAE 2:1)
     19.6 yd³
  • 4m³ (5.25yd³) Performance Series - Buckets - Loader
    Capacity
     5.25 yd³
    Width
     128 in
    Weight
     5284 lb
  • DE150 GC (60 Hz) - Electric Power
    Minimum Rating
     132 ekW
    Maximum Rating
     132 ekW
    Emissions/Fuel Strategy
     Non Regulated
  • 1374mm (54in) Ripper - Rippers
    Overall Length
     73.3 in
    Weight
     2473 lb
    Width
     32 in
  • 1.14 m3 (1.5 yd3) Pin On - Buckets - Backhoe Front
    Capacity
     1.5 yd³
    Width
     95.5 in
    Weight
     2104.9 lb
  • T109 Hydraulic Side Shift - Trenchers
    Overall Length
     92.4 in
    Overall Height
     30.9 in
    Overall Width
     56.1 in
  • CW-55S - Couplers - Excavator
    Weight
     1210 lb
    Width
     22.4 in
    Load Rating, Hoisting Hook
     22 ton (US)
  • 1200 mm (47 in) - Buckets - Excavator
    Capacity
     167.1 l
    Width
     47.2 in
    Weight
     235.7 lb
  • ATC Power Breaker & Case Switch Automatic Transfer Switch - Electric Power
    Rating Range
     200 to 5000A
    Transfer Type
     Open Transition
    Switch Type
     Power Breaker
  • C280 - Marine Power Systems
    Maximum Rating
     7268 BHP
    Minimum Rating
     2320 BHP
    Aspiration
     TA
  • 315 GC - Excavators

     -
    Operating Weight
     34000 lb
  • DE33 GC (50 Hz) - Electric Power
    Minimum Rating
     33.0 kVA
    Maximum Rating
     33.0 kVA
    Emissions/Fuel Strategy
     Non Regulated
  • H130 GC S - Hammers
    Impact Energy Class
     4425 ft-lb
    Blows per Minute
     350-700
    Maximum Operating Weight
     5471.4 lb
  • DG50-2 (3 Phase) - Electric Power
    Fuel System
     Natural Gas / LP Vapor
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • BLADES

     -

    -
  • HM418C - Mulchers
    Overall Width
     83.5 in
    Weight
     3196.7 lb
    Required Hydraulics
     XHP / XE
  • C3.6 for Tractors - Industrial
    Maximum Power
     134 HP
    Rated Speed
     2000-2400 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     840 lb
  • C32 IMO III - Marine Power Systems
    Maximum Rating
     1332 BHP
    Minimum Rating
     1047 BHP
    Aspiration
     Turbocharged-aftercooled
  • 1883 mm (74 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.68 yd³
    Width
     74.1 in
    Weight
     608.5 lb
  • 4.87 m (16 ft) - Snow Pushes
    Weight
     3249.6 lb
    Overall Height
     44.4 in
    Working Width
     192 in
  • 1.1 m3 (1.4 yd3) Pin On - Buckets - Backhoe Front
    Capacity
     1.4 yd³
    Width
     95.5 in
    Weight
     2002.9 lb
  • Air Filter

     -

    -
  • 1.5 m3 (1.95 yd3) - Buckets - Telehandler
    Rated Bucket Capacity
     1.95 yd³
    Width
     95 in
    Bucket Weight
     1058 lb
  • ATC Power Breaker Bypass Isolation Open/Closed Transition ATS - Electric Power
    Rating Range
     200-5000A
    Transfer Type
     Bypass isolation, Closed transition
    Switch Type
     Power Breaker
  • 793F - Off-Highway Trucks
    Gross Power - SAE J1995
     2650 HP

    -
    Top Speed - Loaded
     37.3 mile/h
  • 3516B (50 Hz) with Upgradeable Package - Electric Power
    Minimum Rating
     2000 kVA
    Maximum Rating
     2500 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption, Low Emissions
  • C2.2 - Industrial
    Maximum Power
     74 HP
    Rated Speed
     2800 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     242 kg (533.5 lbs)
  • 336 - Excavators
    Engine Power - ISO 9249
     311 HP
    Operating Weight
     81900 lb
  • 6.8-22 kVA SA Enclosure - Generator Set Enclosures

     -

    -
  • 1219 mm (48 in) - Forks
    Fork Tine Width
     4 in
    Fork Tine Thickness
     2.36 in
    Fork Tine Length
     48 in
  • 1000 mm (39 in) - Buckets - Excavator
    Capacity
     4.8 ft³
    Width
     39.4 in
    Weight
     240.1 lb
  • G313 GC Demolition & Sorting Grapple: 587-8719 - Grapples
    Capacity
     0.59 yd³
    Weight - Including Bracket
     4343.1 lb
  • T315 Hydraulic Side Shift - Trenchers
    Overall Length
     118.5 in
    Overall Height
     30.9 in
    Overall Width
     74.8 in
  • DE150 GC (50 Hz) - Electric Power
    Minimum Rating
     150 kVA
    Maximum Rating
     150 kVA
    Emissions/Fuel Strategy
     Non Regulated
  • 1.5 m3 (2.0 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     2 yd³
    Width
     81.9 in
    Weight
     1134.9 lb
  • 3512C IMO II - Marine Power Systems
    Power Range
     1280-2551 bhp (955-1902 bkW)
    Speed Range
     1200 rpm, 1600 rpm, 1800 rpm
    Emissions
     IMO II, EU IW
  • C3.4B, Greater than 56 kW (75 hp) - Industrial
    Maximum Power
     115 HP
    Rated Speed
     2200
    Weight - Approximate, Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     407 kg (897 lb)
  • T109 Manual Side Shift - Trenchers
    Overall Length
     92.4 in
    Overall Height
     30.9 in
    Overall Width
     56.1 in
  • UJ640E

     -

    -
  • 775G - Off-Highway Trucks
    Gross Power - SAE J1995
     825 HP
    Nominal Payload Class (100%)
     71.3 ton (US)
    Top Speed - Loaded
     42 mile/h
  • 4.2 m3 (5.5 yd3), Fusion™, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     5.5 yd³
    Width
     108.1 in
    Weight
     3172.4 lb
  • 23.8 m³ (30.8 yd³ ) - Blades
    Capacity
     30.8 yd³
    Width
     193 in
  • 35.9m³ (47yd³) Serrated Edge - Buckets - Loader
    Capacity
     47 yd³
    Width
     248 in
    Weight
     51916 lb
  • 777G - Off-Highway Trucks
    Gross Power - SAE J1995
     1025 HP
    Nominal Payload Class (100%)
     100 ton (US)
    Top Speed - Loaded
     41.7 mile/h
  • 3606 (50 Hz) - Electric Power
    Minimum Rating
     1775 kVA
    Maximum Rating
     2688 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption
  • 236D3 - Skid Steer Loaders
    Gross Power - SAE J1995
     74.3 HP
    Operating Weight
     6567 lb
    Rated Operating Capacity
     1800 lb
  • GSH425 4-Tine, 1150-Liter Orange Peel Grapple - Grapples
    Capacity
     1.5 yd³
    Operating Weight
     3666 lb
  • 1627mm (64in) Ripper - Rippers
    Overall Length
     82.9 in
    Weight
     3782 lb
    Width
     34.8 in
  • 301.7D - Excavators
    Gross Power - ISO 14396
     24.3 HP
    Operating Weight
     3810 lb
  • CM43C Inline - Electric Power
    Minimum Rating
     5520 kWe
    Maximum Rating
     8290 kWe
    Emissions/Fuel Strategy
     (WB) Cert stage 1 and 2
  • 1627mm (64in) Ripper - Rippers
    Overall Length
     83.1 in
    Weight
     3558 lb
    Width
     32.2 in
  • CM46DF Inline - Electric Power
    Minimum Rating
     5290 kWe
    Maximum Rating
     7930 kWe
    Emissions/Fuel Strategy
     (WB) Cert stage 1 and 2
  • 1000 mm (39 in) - Buckets - Excavator
    Capacity
     101.9 l
    Width
     39.4 in
    Weight
     172.4 lb
  • QJ241

     -

    -
  • GSH520 5-Tine, 750-Liter Orange Peel Grapple - Grapples
    Capacity
     1 yd³
    Operating Weight
     3166 lb
  • 0.76 m3 (1 yd3) - Buckets - Telehandler
    Rated Bucket Capacity
     1 yd³
    Width
     73 in
    Bucket Weight
     710 lb
  • 11.5m³ (15yd³) - Buckets - Loader
    Capacity
     15 yd³
    Width
     162 in
    Weight
     13030 lb
  • 1676 mm (66 in) - Forks
    Width
     66 in
    Height
     22.9 in
    Weight
     436.5 lb
  • SW360B, 76 mm (3 in) - Saws
    Length
     93 in
    Overall Height
     70 in
    Overall Width
     73 in
  • 1883 mm (74 in) w/Spill Guard, Bolt-On Teeth - Buckets - Skid Steer Loader
    Capacity
     0.48 yd³
    Width
     74.1 in
    Weight
     917.1 lb
  • G212 GC Demolition & Sorting Grapple: 587-8639 - Grapples
    Capacity
     0.52 yd³
    Weight
     1413 lb
  • C13 - Industrial
    Maximum Power
     440 HP
    Rated Speed
     1800-2100
    Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     1692 kg (3730 lb)
  • 3.1m³ (4yd³) - Buckets - Loader
    Capacity
     4 yd³
    Width
     106 in
    Weight
     2465 lb
  • 3512 - Industrial
    Maximum Power
     1500 HP
    Rated Speed
     1200-1800 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     6078 kg (13,400 lb)
  • 340 Straight Boom - Excavators
    Gross Power - ISO 14396
     314 HP
    Operating Weight
     Long undercarriage, Straight boom, R3.9DB (12'10") stick, GDC 2.27 m3 (2.97 yd3) bucket, 700 mm (28") triple grouser shoes, 9.0 mt (19,842 lb) counterweight.
  • G3520E - Electric Power
    Fuel Type
     Natural Gas
    Frequency
     50 / 60 Hz
  • C9.3 - Industrial
    Maximum Power
     400 HP
    Rated Speed
     1800-2200 rpm
    Weight - Approximate, Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     1678-1839 kg (3699-4055 lb)
  • 1120 mm (44 in) - Fork Accessories

     -

    -
  • 1140 mm (45 in) - Bale Spears
    Overall Width
     50.6 in
    Overall Height
     22.4 in
    Capacity
     2004 lb
  • 9.2m³ (12yd³) Performance Series - Buckets - Loader
    Capacity
     12 yd³
    Width
     182 in
    Weight
     16211 lb
  • M 32 C - Marine Power Systems
    Maximum Rating
     4316 kWe (5400 kVA)
    Minimum Rating
     2762 kWe (3456 kVA)
  • 762 mm (30 in), Pin On - Buckets - Backhoe Rear
    Capacity
     9.5 ft³
    Width
     30 in
    Weight
     396.8 lb
  • M318F - Excavators

     -
    Operating Weight*
     17 200 to 19 700 kg (37,919 to 43,431 lb)
  • UJ440E

     -

    -
  • 313 - Excavators

     -
    Operating Weight
     30400 lb
  • 336 GC - Excavators
    Engine Power - ISO 9249
     273 HP
    Operating Weight
     80500 lb
  • DE33 GC (60 Hz) - Electric Power
    Minimum Rating
     30.0 ekW
    Maximum Rating
     30.0 ekW
    Emissions/Fuel Strategy
     Non Regulated
  • HOSE & COUPLINGS

     -

    -
  • 2m³ (2.6yd³) - Buckets - Loader
    Capacity
     2.6 yd³
    Width
     100 in
    Weight
     2119 lb
  • 5.0 m3 (6.5 yd3), Fusion™, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     6.5 yd³
    Width
     119.4 in
    Weight
     4909.7 lb
  • 1.8 m3 (2.4 yd3), Weld-On Teeth - Buckets - Compact Wheel Loader
    Rated Capacity
     1.9 yd³
    Width
     95.8 in
    Weight
     1490.1 lb
  • T112 Hydraulic Side Shift - Trenchers
    Overall Length
     106.5 in
    Overall Height
     30.9 in
    Overall Width
     74.8 in
  • 305 mm (12 in) - Buckets - Excavator
    Rated Capacity
     2.1 yd³
    Width
     12 in
    Weight
     156.5 lb
  • 1140 mm (45 in) - Bale Spears
    Overall Width
     55.4 in
    Overall Height
     51.8 in
    Capacity
     3007.1 lb
  • CG170-20 - Electric Power
    Fuel Type
     Natural Gas, Biogas, Coal Gas
    Frequency
     50 / 60 Hz
  • 1524 mm (60 in) - Forks
    Carriage Width
     98.3 in
    Carriage Height
     61 in
    Carriage Weight
     1164.7 lb
  • CAT® HEAVY DUTY

     -

    -
  • 5.0 m3 (6.5 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     6.5 yd³
    Width
     119.3 in
    Weight
     4973.6 lb
  • GB120 - Blades

     -

    -
  • 1 m3 (1.3 yd3) - Buckets - Telehandler
    Rated Bucket Capacity
     1.3 yd³
    Width
     95 in
    Bucket Weight
     1687 lb
  • 2185 mm (86 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     1.1 yd³
    Width
     86 in
    Weight
     747.4 lb
  • CYLINDERS

     -

    -
  • 457 mm (18 in) - Augers
    Diameter
     19.5 in
    Weight
     55.1 lb
    Overall Length
     10.9 in
  • 1.03 m3 (1.35 yd3) Pin On, Bolt-On Teeth - Buckets - Backhoe Front
    Capacity
     1.29 yd³
    Width
     89.1 in
    Weight
     1873.9 lb
  • CG170-12 K - Electric Power
    Fuel Type
     Natural Gas, Biogas, Coal Gas
    Frequency
     50 or 60 Hz
  • 45.9 m³ (60.0 yd³) - Blades
    Capacity
     60 yd³
    Width
     215 in
  • G217 GC Demolition & Sorting Grapple: 587-8657 - Grapples
    Capacity
     1.18 yd³
    Weight - Including Bracket
     5224.95 lb
  • C7 - Industrial
    Maximum Power
     300 HP
    Rated Speed
     1800-2200 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     588 kg (1296 lb)
  • D9T WH - Dozers
    Flywheel Power
     436 HP
    Operating Weight
     110471 lb
  • C9.3B - Industrial
    Maximum Power
     456 HP
    Rated Speed
     1800-2200 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     865 kg (1907 lb)
  • 0.8 m3 (1.0 yd3), Bolt-On Teeth - Buckets - Compact Wheel Loader
    Capacity
     1 yd³
    Width
     74.4 in
    Weight
     1131 lb
  • C1.1 - Industrial
    Maximum Power
     25 HP
    Rated Speed
     2200-3400 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     87 kg (191 lb)
  • 335F L - Excavators
    Engine Power - ISO 9249
     200 HP
    Operating Weight
     83820 lb
  • CV117 - Compactors
    Drum Width
     66 in
    Weight
     2063.5 lb
    Required Hydraulics
     Standard Flow
  • 2642 mm (104 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     1.74 yd³
    Width
     104 in
    Weight
     921.5 lb
  • Pin Grabber Coupler (TB-Linkage): 455-3907 - Couplers - Excavator
    Weight
     2082 lb
    Width - Machine Interface
     26.2 in
    Lifting Eye Working Load Limit
     44092 ton (US)
  • 4121mm (162in) Mat'l Handling Arm, Fusion™ - Material Handling
    Maximum Load Rating
     19000 lb
    Retracted Length
     99 in
    Extended Length
     162 in
  • 610 mm (24 in) - Augers
    Diameter
     25.5 in
    Weight
     78.9 lb
    Overall Length
     11.9 in
  • 926M - Wheel Loaders
    Rated Net Power
     148 HP
    Operating Weight
     28193 lb
    Bucket Capacities
     1.9-5.0 m³ (2.5-6.5 yd³)
  • C7.1 - Industrial
    Maximum Power
     275 HP
    Rated Speed
     1800-2200 rpm
    Weight - Approximate, Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     1000 kg (2204 lb)
  • 305 mm (12 in), Pin On - Buckets - Backhoe Rear
    Capacity
     2.8 ft³
    Width
     12 in
    Weight
     213.8 lb
  • GREASES

     -

    -
  • 3508C - Marine Power Systems
    Power Range
     775-1100 bhp (578-820 bkW)
    Speed Range
     1200-1600 rpm
    Emissions
     IMO II, EU IW
  • 1421 mm (56 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.39 yd³
    Width
     55.9 in
    Weight
     392.4 lb
  • C32 Tier 3 - Marine Power Systems
    Maximum Rating
     1333 BHP
    Minimum Rating
     1047 BHP
    Aspiration
     TTA
  • 2.7 m3 (3.5 yd3), Fusion™ Coupler - Buckets - Loader
    Capacity
     3.5 yd³
    Width
     100 in
    Weight
     2120.8 lb
  • 762 mm (30 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     12.7 ft³
    Width
     30 in
    Weight
     489.4 lb
  • 7.7m³ (10yd³) - Buckets - Loader
    Capacity
     10 yd³
    Width
     157 in
    Weight
     9812 lb
  • DG60-2 (Single Phase) - Electric Power
    Fuel System
     Natural Gas / LP Vapor
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • 1.0 m3 (1.31 yd3), IT Coupler, Bolt-On Teeth - Buckets - Backhoe Front
    Capacity
     1.31 yd³
    Width
     94.7 in
    Weight
     1041.9 lb
  • 301.7D CR - Excavators
    Gross Power - ISO 14396
     24.3 HP
    Operating Weight
     3726 lb
  • HYDRAULIC

     -

    -
  • PM312 Track Undercarriage - Cold Planers
    Rated Power
     336.6 HP
    Operating Weight
     48429 lb
    Milling Width
     48.2 in
  • CB8 - Compactors
    Gross Power
     100 HP
    Operating Weight
     18783 lb
    Standard Compaction Width
     67 in
  • 1566 mm (62 in) - Fork Accessories

     -

    -
  • 1200 mm (47 in) - Buckets - Excavator
    Rated Capacity
     9.18 yd³
    Width
     47.2 in
    Weight
     410.5 lb
  • 920 - Wheel Loaders
    Rated Net Power - Rated Engine Speed
     2200 r/min
    Operating Weight
     21742 lb
    Bucket Capacities
     1.3-1.9 m³ (1.7-2.5 yd³)
  • 930M - Wheel Loaders
    Rated Net Power
     157 HP
    Operating Weight
     31382 lb
    Bucket Capacities
     2.1-5.0 m³ (2.7-6.5 yd³)
  • 3.66 m (12 ft) - Snow Pushes
    Weight
     952.4 lb
    Overall Height
     36 in
    Working Width
     144 in
  • 4585mm (180in) Mat'l handing Arm, Fusion™ - Material Handling
    Maximum Load Rating
     19000 lb
    Retracted Length
     120 in
    Extended Length
     187 in
  • 457 mm (18 in) - Augers
    Diameter
     18 in
    Weight
     143.3 lb
    Overall Length
     50.3 in
  • C13 - Industrial
    Maximum Power
     520 HP
    Rated Speed
     1800-2100 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     908.4 kg (2002.7 lb)
  • 229 mm (9 in) - Augers
    Diameter
     10.5 in
    Weight
     33.1 lb
    Overall Length
     9.8 in
  • 3616 (50 Hz) - Electric Power
    Minimum Rating
     4700 kVA
    Maximum Rating
     7520 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption
  • A41 - Augers
    Drive Shaft Torque at Maximum Pressure
     3037.3 lb/ft
    Drive Method
     Gerotor Motor - Single Planetary Reduction
    Mounting Bracket Design
     Skid Steer Loader, Compact Wheel Loader
  • G324 Demolition & Sorting Grapple: 587-8977 - Grapples
    Capacity
     0.98 yd³
    Weight
     3940 lb
  • M314 - Excavators

     -
    Operating Weight Maximum
     39683 lb
  • 1.14 m3 (1.5 yd3) Pin On - Buckets - Backhoe Front
    Capacity
     1.5 yd³
    Width
     95.5 in
    Weight
     2455.9 lb
  • CD8 - Solid Drum - Compactors
    Gross Power
     100 HP
    Operating Weight
     16314 lb
    Standard Compaction Width
     59 in
  • 302 CR - Excavators
    Gross Power - ISO 14396
     21.6 HP
    Operating Weight
     4987 lb
  • 770G - Off-Highway Trucks
    Gross Power - SAE J1995
     515 HP
    Nominal Payload Class (100%)
     42.1 ton (US)
    Top Speed - Loaded
     45.8 mile/h
  • M322F (2017) - Excavators

     -
    Operating Weight*
     20 800 to 22 330 kg (45,856 to 49,229 lb)
  • 3512B (50 Hz) - Electric Power
    Minimum Rating
     1320 kVA
    Maximum Rating
     1875 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption, Low Emissions
  • T112 Manual Side Shift - Trenchers
    Overall Length
     106.5 in
    Overall Height
     30.9 in
    Overall Width
     74.8 in
  • 762 mm (30 in), Pin On - Buckets - Backhoe Rear
    Capacity
     8.2 ft³
    Width
     30 in
    Weight
     324.1 lb
  • A23 - Augers
    Drive Shaft Torque at Maximum Pressure
     1699.3 lb/ft
    Drive Method
     Gerotor Motor - Direct Drive
    Mounting Bracket Design
     Mini Excavator
  • S2050 Straight Scrap & Demolition Shear - Shears
    Length
     140 in
    Height
     60 in
    Width
     25 in
  • C18 - Industrial
    Maximum Power
     800 HP
    Rated Speed
     1800-2100 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     1673 kg (3688 lb)
  • Cat Switchgear - Electric Power
    Configuration
     IP4X
    Modes of Operation
     Switchgear integration options for multi generator and utility synchronising, load sharing, Peak Lopping/Shaving, AMF, Changeover, Load bank connection, Protection relay etc.
    Application
     LV 380…480 VAC, 50 Hz, 3-Phase.
  • 3.1m³ (4yd³) - Buckets - Loader
    Capacity
     4 yd³
    Width
     106 in
    Weight
     2194 lb
  • HM215C - Mulchers
    Overall Width
     69.2 in
    Weight
     1803.4 lb
    Required Hydraulics
     High Flow
  • 700 mm (28 in) - Buckets - Excavator
    Capacity
     3.2 ft³
    Width
     27.6 in
    Weight
     156.3 lb
  • 930M Aggregate Handler - Wheel Loaders
    Rated Net Power
     157 HP
    Operating Weight
     31144 lb
    Bucket Capacities
     2.5-2.7 m3 (3.3-3.5 yd3)
  • C32 IMO III - Marine Power Systems
    Maximum Rating
     940 ekW
    Minimum Rating
     219 ekW
    Frequency
     60hz
  • 4.2 m3 (5.5 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     5.5 yd³
    Width
     108.1 in
    Weight
     3170.2 lb
  • 1370 mm (54 in) - Fork Accessories

     -

    -
  • MP365 Shear Jaw - Multi-Processors
    Length
     2597 in
    Height
     2133 in
    Width
     1100 in
  • 600 mm (24 in) - Buckets - Excavator
    Capacity
     3.2 ft³
    Width
     23.6 in
    Weight
     155.4 lb
  • B9 - Hammers

     -

    -
  • 3512E - Marine Power Systems

     -

    -
    Aspiration
     TA
  • 789D - Off-Highway Trucks
    Gross Power - SAE J1995
     2100 HP

    -
    Top Speed - Loaded
     35.5 mile/h
  • VM 46 DF - Marine Power Systems
    Power Range
     10800 - 15440 kW
    Speed Range
     500 / 514 rpm
    Emissions
     IMO II in diesel mode / IMO III in gas mode
  • 988G/H - Couplers - Loader
    Width
     78.7 in
    Height
     40.6 in
    Weight
     3608 lb
  • H110 GC S - Hammers
    Impact Energy Class
     1475 ft·lbf
    Blows per Minute
     450-650
    Maximum Operating Weight
     2776 lb
  • 0.75 m3 (1.0 yd3), Pin On - Buckets - Backhoe Front
    Capacity
     0.99 yd³
    Width
     89.1 in
    Weight
     776 lb
  • 14 - Motor Graders
    Base Power (1st Gear) - Net
     238 HP
    Operating Weight - Typically Equipped
     57250 lb
    Blade Width
     14 ft
  • CW-20S - Couplers - Excavator
    Weight
     418 lb
    Width
     16.8 in
    Load Rating, Hoisting Hook
     11 ton (US)
  • C11 - Industrial
    Maximum Power
     450 HP
    Rated Speed
     1800-2100 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     930 kg (2050 lb)
  • WP and SA Enclosures D40-2LC to D60-4LC - Generator Set Enclosures

     -

    -
  • 406 mm (16 in) - Buckets - Excavator
    Rated Capacity
     2.7 yd³
    Width
     16 in
    Weight
     174.2 lb
  • Hex To Round Adapter - Auger Accessories

     -

    -
  • 3406C - Industrial
    Maximum Power
     465 HP
    Rated Speed
     1800-2100 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     1300 kg (2866 lb)
  • 11.5m³ (15yd³) - Buckets - Loader
    Capacity
     15 yd³
    Width
     162 in
    Weight
     13278 lb
  • 272D3 XE - Skid Steer Loaders
    Gross Power - SAE J1995
     110 HP
    Operating Weight
     9573 lb
    Rated Operating Capacity
     3700 lb
  • G318 WH Demolition & Sorting Grapple: 587-8975 - Grapples
    Capacity
     1.05 yd³
    Weight
     3190 lb
  • D3K2 Shiphold / Port Handling - Dozers
    Power - Net
     80 HP
    Operating Weight - XL
     18775 lb
  • 22m³ (28.8yd³) Standard Rock - Buckets - Mining Shovels

     -

    -
  • T109 Manual Side Shift - Trenchers
    Overall Length
     92.4 in
    Overall Height
     30.9 in
    Overall Width
     56.1 in
  • 12.2m³ (16yd³) - Buckets - Loader
    Capacity
     16 yd³
    Width
     203 in
    Weight
     33451 lb
  • DE88 GC (60 Hz) - Electric Power
    Minimum Rating
     80 ekW
    Maximum Rating
     80 ekW
    Emissions/Fuel Strategy
     Non Regulated
  • 63.46 m³ (83.0 yd³) - Blades
    Capacity
     83 yd³
    Width
     270 in
  • C12 - Marine Power Systems
    Power Range
     578-609 mhp (570-600 bhp)
    Speed Range
     2300 rpm
    Emissions
     IMO I
  • 302.4D - Excavators
    Gross Power - ISO 14396
     24.3 HP
    Operating Weight
     5115 lb
  • 330 mm (13 in) - Buckets - Excavator
    Rated Capacity
     3.5 yd³
    Width
     13 in
    Weight
     299.8 lb
  • C1.5 - Industrial
    Maximum Power
     40.2 HP
    Rated Speed
     2200-3000 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     149-156.5 kg (328.5-345 lb)
  • 890 mm (35 in) - Bale Spears
    Overall Width
     50.6 in
    Overall Height
     22.4 in
    Capacity
     2004 lb
  • 2188 mm (86 in) w/Spill Guard, Bolt-On Teeth - Buckets - Skid Steer Loader
    Capacity
     0.56 yd³
    Width
     86.1 in
    Weight
     1018.5 lb
  • 25m³ (32.7yd³) Heavy Rock - Buckets - Mining Shovels

     -

    -
  • G212 GC Demolition & Sorting Grapple: 587-8632 - Grapples
    Capacity
     0.52 yd³
    Weight - Including Bracket
     2303.83 lb
  • 1220 mm (48 in) - Fork Accessories

     -

    -
  • 725C2 - Articulated Trucks
    Gross Power - SAE J1995
     320 HP
    Rated Payload
     26.5 ton (US)
    Heaped (SAE 2:1)
     19.6 yd³
  • C280-12 - Marine Power Systems
    Power Range
     4640-5096 bhp (3460-3800 bkW)
    Speed Range
     900 rpm
    Emissions
     IMO II
  • 1.6 m3 (2.1 yd3), IT Coupler, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
     2.2 yd³
    Width
     94.5 in
    Weight
     1362 lb
  • 3.25m³ (4.25yd³) - Buckets - Loader
    Capacity
     4.25 yd³
    Width
     115 in
    Weight
     4715 lb
  • CAT® GENERAL DUTY

     -

    -
  • CC2.6 - Compactors
    Gross Power
     30.7 HP
    Operating Weight
     4982 lb
    Standard Compaction Width
     47 in
  • 308 CR VAB - Excavators
    Gross Power - ISO 14396
     74.3 HP
    Operating Weight
     20906 lb
  • 299D2 - Compact Track and Multi Terrain Loaders
    Gross Power - SAE J1995
     98 HP
    Operating Weight
     11275 lb
  • 914 mm (36 in) - Augers
    Diameter
     36 in
    Weight
     381.4 lb
    Overall Length
     50.3 in
  • 3512C HD - Marine Power Systems
    Power Range
     1340-2366 bhp (1000-1765 bkW)
    Speed Range
     1600-1800 rpm
    Emissions
     EPA Tier 3, IMO II
  • 3.5 m3 (4.6 yd3), Fusion™, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     4.5 yd³
    Width
     108.1 in
    Weight
     2872.6 lb
  • Pin Grabber Coupler (DB-Linkage): 455-3905 - Couplers - Excavator
    Weight
     1370 lb
    Width - Machine Interface
     23.2 in
    Lifting Eye Working Load Limit
     30865 ton (US)
  • QJ341/+

     -

    -
  • G3406 - Industrial
    Maximum Power
     325 HP

    -
    Weight - Net Dry
     1362 kg (3000 lb)
  • 16.4 m³ (21.5 yd³) - Blades
    Capacity
     21.5 yd³
    Width
     192 in
  • C0.7 - Industrial
    Maximum Power
     17.8 HP
    Rated Speed
     2200-3600 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     156.6 lb
  • 921 mm (36 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     17.6 ft³
    Width
     36.3 in
    Weight
     859.8 lb
  • 610 mm (24 in), Pin On - Buckets - Backhoe Rear
    Capacity
     7 ft³
    Width
     24 in
    Weight
     381.4 lb
  • 13.38 m³ (17.5 yd³) - Blades
    Capacity
     17.5 yd³
    Width
     168 in
  • 1.03 m3 (1.35 yd3) Pin On - Buckets - Backhoe Front
    Capacity
     1.29 yd³
    Width
     94.7 in
    Weight
     1593 lb
  • 3608 (50 Hz) - Electric Power
    Minimum Rating
     2363 kVA
    Maximum Rating
     3575 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption
  • C32 - Industrial
    Maximum Power
     1200 HP
    Rated Speed
     1800 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     6625 lb
  • 1.1 m3 (1.4 yd3), IT Coupler, Bolt-On Teeth - Buckets - Backhoe Front
    Capacity
     1.4 yd³
    Width
     95.5 in
    Weight
     1716.1 lb
  • 980 3-Wedge - Couplers - Loader
    Width
     65.9 in
    Height
     34.4 in
    Weight
     2750 lb
  • GSV520 GC 5-Tine, 750-Liter Orange Peel Grapple - Grapples
    Capacity
     1 yd³
    Operating Weight
     NAN lb
  • 1525 mm (60 in) - Forks
    Fork Tine Width
     6 in
    Fork Tine Thickness
     2.36 in
    Fork Tine Length
     60 in
  • 16 - Motor Graders
    Base Power (1st Gear) - Net
     290 HP
    Operating Weight - Typically Equipped
     71454 lb
    Blade Width
     16 ft
  • 3.2 m3 (4.2 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     4.5 yd³
    Width
     108.1 in
    Weight
     2844 lb
  • 1 m3 (1.3 yd3) - Buckets - Telehandler
    Rated Bucket Capacity
     1.3 yd³
    Width
     95 in
    Bucket Weight
     1007 lb
  • 2.5m³ (3.25yd³) - Buckets - Loader
    Capacity
     3.25 yd³
    Width
     106 in
    Weight
     3494 lb
  • VM 32 E - Marine Power Systems
    Power Range
     6360 - 8960 kW
    Speed Range
     720/750 rpm
    Emissions
     IMO II
  • 1219 mm (48 in) - Fork Accessories

     -

    -
  • 3.4m³ (4.5yd³) - Buckets - Loader
    Capacity
     4.5 yd³
    Width
     115 in
    Weight
     3139 lb
  • 257D3 - Skid Steer Loaders
    Gross Power - SAE J1995
     74.3 HP
    Operating Weight
     8094 lb
  • G3412 - Electric Power
    Fuel Type
     Natural Gas, Biogas, Field Gas, Propane
    Frequency
     50 or 60 Hz
  • C32 Tier 3 / IMO II - Marine Power Systems
    Maximum Rating
     1333 BHP
    Minimum Rating
     314 BHP
    Aspiration
     Turbocharged-aftercooled aspiration
  • G324 Demolition & Sorting Grapple: 587-8978 - Grapples
    Capacity
     1.05 yd³
    Weight
     3818 lb
  • Emergency Transfer Load Manager (EXL) - Electric Power
    Configuration
     Wall mounted paralleling control system that monitors and controls a single generator and a single utility.
    Modes of Operation
     Utility Import, Export, and base load operations, Peak shaving, and Emergency Standby. Closed Transition to/from Generator Power
    Application
     LV and MV (208V-32kV)
  • QE141

     -

    -
  • 272D3 - Skid Steer Loaders
    Gross Power - SAE J1995
     98 HP
    Operating Weight
     9133 lb
    Rated Operating Capacity
     3450 lb
  • RM500B - Road Reclaimers
    Gross Power
     546 HP
    Maximum Operating Weight
     62611 lb
    Cutting/Mixing Width
     96 in
  • DG50-2 (Single Phase) - Electric Power
    Fuel System
     Natural Gas / LP Vapor
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • 1883 mm (74 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.54 yd³
    Width
     74.1 in
    Weight
     546.7 lb
  • HM115C - Mulchers
    Overall Width
     69.2 in
    Weight
     1803.4 lb
    Required Hydraulics
     Standard Flow
  • 730 - Articulated Trucks
    Gross Power - SAE J1995
     375 HP
    Rated Payload
     31 ton (US)
    Heaped (SAE 2:1)
     23 yd³
  • 1067 mm (42 in) - Forks
    Fork Tine Width
     5 in
    Fork Tine Thickness
     2 in
    Fork Tine Length
     42 in
  • Cat EGP Switchgear - Electric Power
    Configuration
     Configurable PLC based switchgear capable of controlling and monitoring multiple generator sets, tie and load breakers in conjunction with downstream transfer switches for standby or emergency applications
    Modes of Operation
     Multi-unit Island and multi-unit standby mode with optional redundant controls and components.
    Application
     LV and MV (208V - 38 kV)
  • G332 Demolition & Sorting Grapple: 587-8994 - Grapples
    Capacity
     1.18 yd³
    Weight
     4493 lb
  • 1070 mm (42 in) - Fork Accessories

     -

    -
  • 3406C - Industrial
    Maximum Power
     482 HP
    Rated Speed
     1750-2300 rpm
  • 0.95 m3 (1.25 yd3), IT Coupler, Bolt-On Teeth - Buckets - Backhoe Front
    Capacity
     1.26 yd³
    Width
     89.1 in
    Weight
     1018.1 lb
  • 824K - Dozers
    Net Power - ISO 9249
     405 HP
    Maximum Operating Weight - Multiple Blade: Straight Blade (Tier 4 Final/Stage IV equivalent)
     74966 lb
  • 1829 mm (72 in) - Rakes
    Width
     72 in
    Weight
     1069.9 lb
    Jaw Opening
     37 in
  • CW-45S - Couplers - Excavator
    Weight
     880 lb
    Width
     22 in
    Load Rating, Hoisting Hook
     15.4 ton (US)
  • 6.9m³ (9yd³) Serrated Edge - Buckets - Loader
    Capacity
     9 yd³
    Width
     156 in
    Weight
     10540 lb
  • 2.5m³ (3.25yd³) - Buckets - Loader
    Capacity
     2.8 yd³
    Width
     106 in
    Weight
     3582 lb
  • 2.9 m3 (3.8 yd3), Pin On - Buckets - Loader
    Capacity
     3.8 yd³
    Width
     107.4 in
    Weight
     2330.3 lb
  • 305 mm (12 in) - Buckets - Excavator
    Rated Capacity
     1.7 yd³
    Width
     12 in
    Weight
     143.3 lb
  • UH640E

     -

    -
  • 432 - Backhoe Loaders
    Power - Net
     92 HP
    Operating Weight - Nominal
     18347 lb
    Operating Weight - Maximum
     24251 lb
  • CW34 - Compactors
    Gross Power
     133 HP
    Operating Weight - Standard Machine Empty
     22050 lb
    Compaction Width
     82 in
  • CTSM and CTGM Series Manual Transfer Switches - Electric Power
    Rating Range
     40-4000A
    Transfer Type
     Open / Manual
    Switch Type
     Contactor Based
  • R1700G - Underground - Hard Rock
    Gross Power - SAE J1995
     353 HP
    Loaded
     112436 lb
    Nominal Payload Capacity - Tramming
     30865 lb
  • 725C2 Bare Chassis - Articulated Trucks
    Gross Power - SAE J1995
     320 HP
    Rated Payload
     26 t
  • 9.66 m³ (13 yd³) - Blades
    Capacity
     12.6 yd³
    Width
     168 in
  • CW-40 - Couplers - Excavator
    Weight
     528 lb
    Width
     22 in
    Load Rating, Hoisting Hook
     11 ton (US)
  • CB10 - Compactors
    Gross Power
     131 HP
    Operating Weight
     20945 lb
    Standard Compaction Width
     67 in
  • 1220 mm (48 in) - Fork Accessories

     -

    -
  • 406 mm (16 in), Pin On - Buckets - Backhoe Rear
    Capacity
     3.7 ft³
    Width
     16 in
    Weight
     280 lb
  • CW16 11-Wheel - Compactors
    Gross Power
     100.5 HP
    Operating Weight - 11 Wheel Base Machine
     11685 lb
    11 Wheel Compaction Width with Bias Tire
     84 in
  • 1829 mm (72 in) - Forks
    Carriage Width
     98.3 in
    Carriage Height
     61 in
    Carriage Weight
     1130.7 lb
  • 1730 mm (68 in) w/Spill Guard, Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.44 yd³
    Width
     68.1 in
    Weight
     906.1 lb
  • 1.0 m3 (1.3 yd3), Pin On, Bolt-On Teeth - Buckets - Backhoe Front
    Capacity
     1.26 yd³
    Width
     89.1 in
    Weight
     966.1 lb
  • 305 mm (12 in) - Augers
    Diameter
     12 in
    Weight
     101.4 lb
    Overall Length
     50.3 in
  • C175-20 (50 Hz) - Electric Power
    Minimum Rating
     3150 kVA
    Maximum Rating
     4000 kVA
    Emissions/Fuel Strategy
     Low Fuel, Low Emissions
  • 616 mm (24 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     10.8 ft³
    Width
     24.3 in
    Weight
     663.6 lb
  • 4.6m³ (6.0yd³) - Buckets - Loader
    Capacity
     6 yd³
    Width
     120 in
    Weight
     6226 lb
  • 12.2m³ (16yd³) Serrated Edge - Buckets - Loader
    Capacity
     16 yd³
    Width
     190 in
    Weight
     22620 lb
  • CS56B - Compactors
    Gross Power
     157 HP
    Operating Weight - With Cab
     25346 lb
    Compaction Width
     84 in
  • 457 mm (18 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     4.9 ft³
    Width
     18 in
    Weight
     304.2 lb
  • 8.6m³ (11.25yd³) Performance Series - Buckets - Loader
    Capacity
     11.25 yd³
    Width
     182 in
    Weight
     26520 lb
  • MP332 Tank Shear - Multi-Processors
    Length
     87 in
    Height
     78 in
    Width
     40 in
  • 1.1 m3 (1.4 yd3) Pin On, Bolt-On Teeth - Buckets - Backhoe Front
    Capacity
     1.4 yd³
    Width
     95.5 in
    Weight
     1944 lb
  • H120 GC S - Hammers
    Impact Energy Class
     2950 ft-lb
    Blows per Minute
     400-800
    Maximum Operating Weight
     3927 lb
  • DG275 GC (3 phase) - Electric Power
    Fuel Type
     Natural Gas
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • BU115 - Brooms
    Overall Width
     71.3 in
    Sweeping Width
     59.4 in
    Brush Diameter
     26 in
  • 3516B DGB™ (50 Hz) - Electric Power
    Minimum Rating
     1750 kVA
    Maximum Rating
     2275 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption
  • 13m³ (17yd³) - Buckets - Loader
    Capacity
     17 yd³
    Width
     162 in
    Weight
     14186 lb
  • 3.5 m3 (4.6 yd3), Fusion™, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     4.6 yd³
    Width
     107.4 in
    Weight
     3961.7 lb
  • D11 - Dozers
    Engine Power - Net SAE J1349/ISO 9249 - Forward
     850 HP
    Operating Weight
     229800 lb
  • 4.6m³ (6.0yd³) Heavy Rock - Buckets - Mining Shovels

     -

    -
  • 340 - Excavators
    Engine Power - ISO 9249
     311 HP
    Operating Weight
     Heavy-duty High Wide undercarriage, Reach boom, R3.2DB (10'6") stick, GD 2.27 m3 (2.97 yd3) bucket, 600 mm (24") HD triple grouser shoes, 7.56 mt (16,700 lb) counterweight.
  • 619 mm (24 in) - Buckets - Excavator
    Rated Capacity
     4.2 yd³
    Width
     24.4 in
    Weight
     216.1 lb
  • 2188 mm (86 in) w/Spill Guard, Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.56 yd³
    Width
     86.1 in
    Weight
     1071.4 lb
  • US550E

     -

    -
  • G3512 1000 ekW - Electric Power
    Fuel Type
     Natural Gas
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Non-Emergency Stationary Genset
  • 610 mm (24 in) - Augers
    Diameter
     610/305 mm (24/12 in)
    Weight
     163.1 lb
    Overall Length
     50.7 in
  • 1.7 m3 (2.2 yd3), ISO Coupler, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
     2.4 yd³
    Width
     94.5 in
    Weight
     1433 lb
  • C9 ACERT - Marine Power Systems
    Power Range
     503-567 bhp (375-423 bkW)
    Speed Range
     2500 rpm
    Emissions
     IMO II
  • 1676 mm (66 in) - Forks
    Width
     66 in
    Height - Grapples Closed
     30.3 in
    Jaw Opening
     34.5 in
  • 305 mm (12 in) - Buckets - Excavator
    Rated Capacity
     2.9 yd³
    Width
     12 in
    Weight
     185.2 lb
  • C32 Tier 4 / IMO III - Marine Power Systems
    Maximum Rating
     1333 BHP
    Minimum Rating
     400 BHP
    Aspiration
     Turbocharged-aftercooled
  • 4.6m³ (6.0yd³) - Buckets - Loader
    Capacity
     6 yd³
    Width
     120 in
    Weight
     6449 lb
  • CG260-16 - Electric Power
    Fuel Type
     Natural Gas, Biogas, Coal Gas, Associated Gas, Synthesis Gas
    Frequency
     60 Hz
  • 1200 mm (47 in) - Buckets - Excavator
    Rated Capacity
     8.19 yd³
    Width
     47.2 in
    Weight
     381 lb
  • 1.1 m3 (1.4 yd3) Pin On, Bolt-On Cutting Edge - Buckets - Backhoe Front
    Capacity
     1.4 yd³
    Width
     95.5 in
    Weight
     1856.1 lb
  • 5.7m³ (7.5yd³) - Buckets - Loader
    Capacity
     7.5 yd³
    Width
     116 in
    Weight
     4140 lb
  • 381 mm (15 in) - Augers
    Diameter
     16.5 in
    Weight
     46.9 lb
    Overall Length
     10.4 in
  • TH417D - Telehandlers
    Maximum Lift Height
     55.8 ft
    Operating Weight - With Carriage and Forks
     22256 lb
    Rated Load Capacity
     8818 lb
  • 914 mm (36 in), Pin On - Buckets - Backhoe Rear
    Capacity
     13.4 ft³
    Width
     36 in
    Weight
     471.8 lb
  • 1.5 m3 (2.0 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     2 yd³
    Width
     81.9 in
    Weight
     1137.1 lb
  • 610 mm (24 in) - Augers
    Diameter
     24 in
    Weight
     202.8 lb
    Overall Length
     50.7 in
  • 907M - Wheel Loaders
    Net Power
     74 HP
    Operating Weight
     12677 lb
    Bucket Capacities
     0.75-1.5 m3 (1.0-2.0 yd3)
  • 1220 mm (48 in) - Fork Accessories

     -

    -
  • C9.3B - Industrial
    Maximum Power
     416 HP
    Rated Speed
     1800-2200 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     1907 lb
  • 1883 mm (74 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.58 yd³
    Width
     74.1 in
    Weight
     597.5 lb
  • ATC-300+ CONTROLLER - Electric Power
    Rating Range
     120 to 600V, single phase and three phase @ 50/60 Hz
    Transfer Type
     Switch application dependent
    Switch Type
     Switch application dependent
  • 13.8m³ (18yd³) - Buckets - Loader
    Capacity
     18 yd³
    Width
     200 in
    Weight
     30852 lb
  • 320 - Excavators
    Engine Power - ISO 9249
     172 HP
    Operating Weight
     50265 lb
  • 1550 mm (61 in) - Fork Accessories

     -

    -
  • 2.7 m3 (3.5 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     3.5 yd³
    Width
     108.1 in
    Weight
     2685.2 lb
  • 7.1m³ (9.25yd³) Performance Series - Buckets - Loader
    Capacity
     9.25 yd³
    Width
     136 in
    Weight
     6146 lb
  • DE55 GC (50 Hz) - Electric Power
    Minimum Rating
     55.0 kVA
    Maximum Rating
     55.0 kVA
    Emissions/Fuel Strategy
     Non Regulated
  • 1.1 m3 (1.4 yd3), Pin On, Bolt-On Teeth - Buckets - Backhoe Front
    Capacity
     1.4 yd³
    Width
     89.1 in
    Weight
     1063.1 lb
  • MP324 Tank Shear - Multi-Processors
    Length
     84 in
    Height
     62 in
    Width
     31 in
  • 3.66 m (12 ft) - Snow Pushes
    Weight
     4111.6 lb
    Overall Height
     38.4 in
    Working Width
     144 in
  • C4.4 (50 Hz) - Electric Power
    Minimum Rating
     50 kVA
    Maximum Rating
     110 kVA
    Emissions/Fuel Strategy
     Non Regulated, EU Stage II and EU Stage IIIA
  • FUEL FILTERS

     -

    -
  • CC34B - Compactors
    Gross Power
     49.1 HP
    Operating Weight
     7446 lb
    Standard Compaction Width
     51 in
  • 1550 mm (61 in) - Fork Accessories

     -

    -
  • 4.26 m (14 ft) - Snow Pushes
    Weight
     2879.2 lb
    Overall Height
     42.8 in
    Working Width
     168 in
  • 600 mm (24 in) - Buckets - Excavator
    Capacity
     2.7 ft³
    Width
     23.6 in
    Weight
     142.6 lb
  • 18m³ (23.5yd³) - Buckets - Loader
    Capacity
     23.5 yd³
    Width
     245 in
    Weight
     47139 lb
  • 0.9 m3 (1.2 yd3), Bolt-On Teeth - Buckets - Compact Wheel Loader
    Capacity
     1.2 yd³
    Width
     74 in
    Weight
     843.7 lb
  • 2.44 m (8 ft) - Snow Pushes
    Weight
     778.2 lb
    Overall Height
     36 in
    Working Width
     96 in
  • 1800mm (71in) Ripper - Rippers
    Overall Length
     90 in
    Weight
     4227 lb
    Width
     35.1 in
  • 1.4 m3 (1.8 yd3), IT Coupler, Bolt-On Teeth - Buckets - Compact Wheel Loader
    Rated Capacity
     2.1 yd³
    Width
     95.6 in
    Weight
     1173.1 lb
  • CS44B - Compactors
    Gross Power
     100.6 HP
    Operating Weight - With Cab
     15895 lb
    Compaction Width
     66 in
  • VM 32 E - Marine Power Systems
    Maximum Rating
     8593 kWe (10752 kVA)
    Minimum Rating
     6099 kWe (7632 kVA)
  • CW-45 - Couplers - Excavator
    Weight
     946 lb
    Width
     27.6 in
    Load Rating, Hoisting Hook
     15.4 ton (US)
  • 7.8 m³ (10.3 yd³) - Blades
    Capacity
     10.3 yd³
    Width
     177 in
  • CVP75 - Compactors
    Impulse Force
     16508 lb
    Cycles/Minimum
     2200
    Base Plate Width
     29 in
  • BRX318 Industrial - Brushcutters
    Overall Width
     75.2 in
    Cutting Width
     72 in
    Maximum Cutting Diameter
     8 in
  • 772G WTR Bare Chassis - Off-Highway Trucks

     -

    -
  • C18 ACERT Tier 3 - Marine Power Systems
    Power Range
     814-1015 mhp, 803-1001 bhp, 599-747 bkW
    Speed Range
     2100-2300 rpm
    Emissions
     EPA Tier 3, IMO II, EU Stage IIIA
  • MP365 Concrete Cutter Jaw - Multi-Processors
    Length
     104.8 in
    Height
     2534 mm
    Width
     3.9 in
  • 6.4m³ (8.3yd³) Serrated Edge - Buckets - Loader
    Capacity
     8.3 yd³
    Width
     156 in
    Weight
     12026 lb
  • UH440i

     -

    -
  • 5.0 m3 (6.5 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     6.5 yd³
    Width
     108.1 in
    Weight
     3298.1 lb
  • 3516E Tier 4 / IMO III - Marine Power Systems
    Power Range
     2501-3386 bhp (1865-2525 bkW)
    Speed Range
     1600-1800 rpm
    Emissions
     U.S. EPA Tier 4 Final, IMO III
  • MP332 Pulverizer Jaw - Multi-Processors

     -

    -
  • 289D - Compact Track and Multi Terrain Loaders
    Gross Power
     74.3 HP
    Operating Weight
     10533 lb
  • C32 ACERT IMO II - Marine Power Systems
    Maximum Rating
     940 ekW (1175 kVA)
    Minimum Rating
     550 eKW (688 kVA)
    Frequency
     50 Hz or 60 Hz
  • CTGSE & CTGDSE Series Service Rated Entrance Rated ATS - Electric Power
    Rating Range
     40-3000A
    Transfer Type
     Open Transition with Service Entrance
    Switch Type
     Contactor Based
  • G3520C - Electric Power
    Fuel Type
     Natural Gas, Biogas, Coal Gas
    Frequency
     50 / 60 Hz
  • 1.0 m3 (1.3 yd3), Pin On - Buckets - Backhoe Front
    Capacity
     1.26 yd³
    Width
     89.1 in
    Weight
     965 lb
  • AP300F - Asphalt Pavers
    Gross Power
     73.8 HP
    Operating Weight - With SE34 VT
     18078 lb
    Standard Paving Range
     1.75 - 3.42 m (5.6' - 11.1')
  • 17m³ (22.2yd³) Standard Rock - Buckets - Mining Shovels

     -

    -
  • A68 - Augers
    Drive Shaft Torque at Maximum Pressure
     5034.6 lb/ft
    Drive Method
     Gerotor Motor - Double Planetary Reduction
    Mounting Bracket Design
     Mini Excavator
  • 8.1m (10.6)yd Heavy Duty - Buckets - Mining Shovels

     -

    -
  • 1524 mm (60 in) - Buckets - Excavator
    Capacity
     420.5 l
    Width
     60 in
    Weight
     557.1 lb
  • 2035 mm (80 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Width
     80.2 in
    Height - Grapples Closed
     20.7 in
    Jaw Opening
     40 in
  • 3.66 m (12 ft) - Snow Pushes
    Weight
     1347 lb
    Overall Height
     39.1 in
    Working Width
     144 in
  • 3512C - Marine Power Systems
    Maximum Rating
     1700 eKW (2125 kVA)
    Minimum Rating
     1550 eKW (1937 kVA)
    Frequency
     60 hz
  • 0.9 m3 (1.2 yd3), Bolt-On Teeth - Buckets - Compact Wheel Loader
    Capacity
     1.2 yd³
    Width
     74 in
    Weight
     822.1 lb
  • QE442/FF/E

     -

    -
  • 3516B (50 Hz) - Electric Power
    Minimum Rating
     1750 kVA
    Maximum Rating
     2250 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption, Low Emissions
  • 390F - Excavators
    Engine Power - ISO 9249
     524 HP
    Operating Weight
     198070 lb
  • 374F - Excavators
    Engine Power - ISO 9249
     472 HP
    Operating Weight
     161533 lb
  • 3.05 m (10 ft) - Snow Pushes
    Weight
     1153 lb
    Overall Height
     39.1 in
    Working Width
     120 in
  • GSH455 4-Tine, 1000-Liter Orange Peel Grapple - Grapples
    Capacity
     1.5 yd³
    Operating Weight
     5666 lb
  • C3.4B, Less than 56 kW (75 hp) - Industrial
    Maximum Power
     74 HP
    Rated Speed
     2200
    Weight - Approximate, Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     359 kg (791.5 lb)
  • C9 275-330 kVA ACERT - Generator Set Enclosures

     -

    -
  • 305 mm (12 in), Pin On - Buckets - Backhoe Rear
    Capacity
     2.3 ft³
    Width
     12 in
    Weight
     271.2 lb
  • PA40 - Winches
    Weight
     1345 lb
    Maximum Line Pull - Full Drum
     40000 lb
    Maximum Line Speed - Full Drum
     131 ft/min
  • TH408D Ag Handler - Telehandlers
    Maximum Lift Height
     24.93 ft
    Operating Weight - With Carriage and Forks*
     18797 lb
    Rated Load Capacity
     8818 lb
  • 740 GC - Articulated Trucks
    Gross Power - SAE J1995
     452 HP
    Rated Payload
     40 ton (US)
    Heaped (SAE 2:1)
     29.7 yd³
  • 17m³ (22.5yd³) - Buckets - Loader
    Capacity
     22.5 yd³
    Width
     222 in
    Weight
     42955 lb
  • 745 - Articulated Trucks
    Gross Power - SAE J1995
     511 HP
    Rated Payload
     45.2 t
    Heaped (SAE 2:1)
     32.7 yd³
  • 973K - Track Loaders
    Net Power - ISO 9249/SAE J1349
     275 HP
    Operating Weight
     63900 lb
    Capacity - General Purpose
     4.2 yd³
  • 2.8m³ (3.6yd³) - Buckets - Loader
    Capacity
     3.6 yd³
    Width
     106 in
    Weight
     3688 lb
  • 0.76 m3 (1.0 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Backhoe Front
    Capacity
     0.99 yd³
    Width
     89.1 in
    Weight
     975.5 lb
  • 3.5 m3 (4.6 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     4.5 yd³
    Width
     108.1 in
    Weight
     2894.7 lb
  • 1.0 m3 (1.3 yd3) Pin On - Buckets - Backhoe Front
    Capacity
     1.3 yd³
    Width
     89.1 in
    Weight
     1593 lb
  • 1524 mm (60 in) - Fork Accessories

     -

    -
  • GSV525 5-Tine, 1150-Liter Orange Peel Grapple - Grapples
    Capacity
     1.5 yd³
    Operating Weight
     NAN lb
  • T109 Hydraulic Side Shift - Trenchers
    Overall Length
     92.4 in
    Overall Height
     30.9 in
    Overall Width
     56.1 in
  • 432F2 - Backhoe Loaders
    Power - Net
     95.2 HP
    Operating Weight - Nominal
     18693 lb
    Operating Weight - Maximum
     24251 lb
  • 1.15 m3 (1.5 yd3), Pin On, Bolt-On Teeth - Buckets - Backhoe Front
    Capacity
     1.5 yd³
    Width
     94.7 in
    Weight
     1112.2 lb
  • 1.03 m3 (1.35 yd3) Pin On - Buckets - Backhoe Front
    Capacity
     1.29 yd³
    Width
     89.1 in
    Weight
     1819 lb
  • D5K2 Tier 4 Final/Stage IV - Dozers
    Power - Net
     104 HP
    Operating Weight - XL
     20313 lb
  • CW-30 - Couplers - Excavator
    Weight
     462 lb
    Width
     22 in
    Load Rating, Hoisting Hook
     11 ton (US)
  • CB7 - Compactors
    Gross Power
     100 HP
    Operating Weight
     17615 lb
    Standard Compaction Width
     59 in
  • S3050 Rotating Scrap & Demolition Shear - Shears
    Length
     176 in
    Height
     58 in
    Width
     42 in
  • CB1.8 - Compactors
    Gross Power
     24.7 HP
    Operating Weight
     3825 lb
    Standard Compaction Width
     39 in
  • DG100-2S (Single Phase) - Electric Power
    Fuel System
     Natural Gas / LP Vapor
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • MP345 Concrete Cutter Jaw - Multi-Processors
    Length
     92.3 in
    Height
     86.6 in
    Width
     39.6 in
  • 1.6 m3 (2.1 yd3), ISO Coupler, Bolt-On Teeth - Buckets - Compact Wheel Loader
    Rated Capacity
     2.6 yd³
    Width
     95.6 in
    Weight
     1341 lb
  • C27 - Industrial
    Maximum Power
     630 HP
    Rated Speed
     1800-2000 rpm
  • 2185 mm (86 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     1.4 yd³
    Width
     86 in
    Weight
     804.7 lb
  • C1.1 - Industrial
    Maximum Power
     28.2 HP
    Rated Speed
     2200-3400 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     87 kg (191 lb)
  • 400 mm (16 in) - Buckets - Excavator
    Capacity
     1.9 ft³
    Width
     15.7 in
    Weight
     121.3 lb
  • 457 mm (18 in) - Buckets - Excavator
    Rated Capacity
     3.1 yd³
    Width
     18 in
    Weight
     194 lb
  • D5 - Dozers
    Power - Net
     170 HP
    Operating Weight
     42263 lb
  • S3070 Rotating Scrap & Demolition Shear - Shears
    Length
     193 in
    Height
     66 in
    Width
     46 in
  • CVP40 - Compactors
    Impulse Force
     8992.36 lb

    -
    Base Plate Width
     23.2 in
  • 3.05 m (10 ft) - Snow Pushes
    Weight
     3692.7 lb
    Overall Height
     38.4 in
    Working Width
     120 in
  • S3025 Rotating Scrap & Demolition Shear - Shears
    Length
     126 in
    Height
     48 in
    Width
     29.5 in
  • 908M Ag Handler - Wheel Loaders
    Rated Net Power - 2,500 rpm - SAE J1349
     68 HP
    Operating Weight
     14402 lb
    Bucket Capacities
     0.9-1.5 m3 (1.2-2.0 yd3)
  • 307.5 - Excavators
    Gross Power - ISO 14396
     57.9 HP
    Operating Weight
     17905 lb
  • 0.76 m3 (1 yd3) - Buckets - Telehandler
    Rated Bucket Capacity
     1 yd³
    Width
     73 in
    Bucket Weight
     1096 lb
  • M 32 C - Marine Power Systems
    Power Range
     2880-4500 kW
    Speed Range
     600 rpm
    Emissions
     IMO II
  • 463 mm (18 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     7 ft³
    Width
     18.2 in
    Weight
     551.2 lb
  • HM315C - Mulchers
    Overall Width
     74.1 in
    Weight
     2958.6 lb
    Required Hydraulics
     High Flow XPS
  • SG16 - Stump Grinders
    Overall Length
     68.4 in
    Overall Height
     28.7 in
    Overall Width
     46.3 in
  • C32 Tier 3 / IMO II - Marine Power Systems
    Maximum Rating
     940 ekW
    Minimum Rating
     219 ekW
    Frequency
     60hz
  • M 43 C - Marine Power Systems
    Maximum Rating
     9063 kWe (11340 kVA)
    Minimum Rating
     5754 kWe (7200 kVA)
  • 10.4m (13.6)yd Coal - Buckets - Mining Shovels

     -

    -
  • CW-55S - Couplers - Excavator
    Weight
     1210 lb
    Width
     22 in
    Load Rating, Hoisting Hook
     22 ton (US)
  • 2.1 m3 (2.7 yd3), Pin On - Buckets - Loader
    Capacity
     2.7 yd³
    Width
     99.5 in
    Weight
     1885 lb
  • 0.76 m3 (1.0 yd3), Pin On - Buckets - Backhoe Front
    Capacity
     0.99 yd³
    Width
     89.1 in
    Weight
     776 lb
  • 610 mm (24 in) - Buckets - Excavator
    Rated Capacity
     8.1 yd³
    Width
     24 in
    Weight
     427.7 lb
  • 2.7m³ (3.5yd³) Performance Series - Buckets - Loader
    Capacity
     3.5 yd³
    Width
     114 in
    Weight
     3027 lb
  • DE165 GC (50 Hz) - Electric Power
    Minimum Rating
     163.9 kVA
    Maximum Rating
     163.9 kVA
    Emissions/Fuel Strategy
     Non Regulated
  • S3015 Rotating Scrap & Demolition Shear - Shears
    Length
     105 in
    Height
     36.2 in
    Width
     25.2 in
  • G217 GC Demolition & Sorting Grapple: 587-8659 - Grapples
    Capacity
     0.78 yd³
    Weight
     1973 lb
  • 610 mm (24 in) Pin On - Buckets - Backhoe Rear
    Capacity
     8.5 ft³
    Width
     24 in
    Weight
     394.6 lb
  • H160 S - Hammers
    Impact Energy Class
     8500 ft·lbf
    Blows per Minute
     400-505
    Maximum Operating Weight
     7784 lb
  • G3508/G3508B - Industrial
    Maximum Power
     690 HP

    -
    Weight - Net Dry
     3941 kg (8688 lb)
  • 1883 mm (74 in) - Buckets - Skid Steer Loader
    Capacity
     0.63 yd³
    Width
     74.1 in
    Weight
     842.2 lb
  • 1.4 m3 (1.8 yd3), ISO Coupler, Bolt-On Teeth - Buckets - Compact Wheel Loader
    Rated Capacity
     2.1 yd³
    Width
     95.6 in
    Weight
     1213 lb
  • MB250 - Buckets - Skid Steer Loader
    Capacity
     0.33 yd³
    Height
     34.5 in
    Weight
     948 lb
  • 1.3 m3 (1.7 yd3), ISO Coupler, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
     1.9 yd³
    Width
     94.5 in
    Weight
     1261 lb
  • 950 mm (37 in) - Rippers
    Overall Length
     31.3 in
    Weight
     372.6 lb
    Width
     16.5 in
  • 457 mm (18 in), Pin On - Buckets - Backhoe Rear
    Capacity
     6.3 ft³
    Width
     18 in
    Weight
     456.4 lb
  • 7m³ (9.2yd³) Iron Ore - Buckets - Loader
    Capacity
     9.2 yd³
    Width
     175 in
    Weight
     18750 lb
  • 1.1 m3 (1.4 yd3) Pin On - Buckets - Backhoe Front
    Capacity
     1.4 yd³
    Width
     95.5 in
    Weight
     1655 lb
  • 963 - Track Loaders
    Net Power - ISO 9249/SAE J1349
     202 HP
    Operating Weight
     44881 lb
    Capacity - General Purpose
     3.2 yd³
  • MH3026 - Material Handlers
    Maximum Net Power - SAE J1349/ISO 9249
     126 kW (169 hp [171 hp/PS*])
    Operating Weight
     25 220-26 150 kg (55,601-57,651 lb)
    Maximum Reach
     37.5 ft
  • C4.4 ACERT - Marine Power Systems
    Maximum Rating
     88R ekW (50 Hz), 105R ekW (60 Hz)
    Minimum Rating
     58R ekW (50 Hz), 51R ekW (60 Hz)
    Frequency
     50 Hz or 60 Hz
  • 15m³ (19.6yd³) Heavy Rock - Buckets - Mining Shovels

     -

    -
  • 2.44 m (8 ft) - Snow Pushes
    Weight
     1082.5 lb
    Overall Height
     39.1 in
    Working Width
     96 in
  • 457 mm (18 in) - Buckets - Excavator
    Rated Capacity
     4.4 yd³
    Width
     18 in
    Weight
     227.1 lb
  • 794 AC - Off-Highway Trucks
    Gross Power - SAE J1995
     3500 HP

    -
    Top Speed - Loaded
     37 mile/h
  • 457 mm (18 in) - Augers
    Diameter
     18 in
    Weight
     108 lb
    Overall Length
     48.2 in
  • 972M XE - Wheel Loaders
    Maximum Net Power - 1,600 rpm - ISO 9249
     311 HP
    Operating Weight
     54871 lb
    Bucket Capacities
     3.20-9.94 m³ (4.19-13.00 yd³)
  • MP324 Universal Jaw - Multi-Processors
    Length
     86.1 in
    Height
     57.6 in
    Width
     31.2 in
  • G317 GC Demolition & Sorting Grapple: 587-8720 - Grapples
    Capacity
     0.49 yd³
    Weight - Including Bracket
     2266 lb
  • 1481mm (58in) Ripper - Rippers
    Overall Length
     77.3 in
    Weight
     3569 lb
    Width
     34.8 in
  • 963K WH - Track Loaders
    Net Power - Rated - ISO 9249/SAE J1349
     193 HP
    Operating Weight
     44802 lb
    Capacity - General Purpose Landfill
     4.1 yd³
  • 1566 mm (62 in) - Fork Accessories

     -

    -
  • 13m³ (17yd³) - Buckets - Loader
    Capacity
     17 yd³
    Width
     203 in
    Weight
     34004 lb
  • 457 mm (18 in), Pin On - Buckets - Backhoe Rear
    Capacity
     4.2 ft³
    Width
     18 in
    Weight
     253.5 lb
  • 2.5 m3 (3.3 yd3), Pin On - Buckets - Loader
    Capacity
     3.2 yd³
    Width
     99.5 in
    Weight
     2153.9 lb
  • EMCP 4.4 Master Control Panel - Electric Power
    Configuration
     Remote monitoring and control for up to 8 generator sets via high-speed network. Enables paralleling a group of EMCP 4.4 equipped generator sets to a single utility source.
    Modes of Operation
     Emergency standby, island, utility paralleling
    Application
     LV and MV (208V - 38 kV)
  • DLK426 - Delimbers

     -

    -
  • GB124 - Blades

     -

    -
  • 140 / 140 AWD - Motor Graders
    Base Power (1st Gear) - Net
     179 HP
    Operating Weight - Typically Equipped
     42647 lb
    Blade Width
     12 ft
  • C18 (50 Hz) - Electric Power
    Minimum Rating
     706 kVA
    Maximum Rating
     850 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption, U.S. EPA Certified for Stationary Emergency Use Only (Tier 2 Nonroad Equivalent Emission Standards), China Nonroad III Emission Standards
  • MB200 - Buckets - Skid Steer Loader
    Capacity
     0.26 yd³
    Height
     28.8 in
    Weight
     639 lb
  • P235 - Pulverizers
    Capacity - Concrete Thickness
     35.4 in
    Width
     27.8 in
    Weight
     7542 lb
  • 3.0 m3 (3.9 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     3.9 yd³
    Width
     99.5 in
    Weight
     3833.8 lb
  • 988K Millyard Arrangement - Wheel Loaders
    Net Power
     541 HP
    Operating Weight
     139920 lb
  • 1.1 m3 (1.4 yd3), Bolt-On Teeth - Buckets - Compact Wheel Loader
    Capacity
     1.4 yd³
    Width
     81.1 in
    Weight
     922.4 lb
  • 1169 mm (46 in) - Fork Accessories

     -

    -
  • 23.70 m³ (31.0 yd³) - Blades
    Capacity
     31 yd³
    Width
     217 in
  • CD10 Solid Drum - Compactors
    Gross Power
     101.9 HP
    Operating Weight
     19908 lb
    Maximum Compaction Width
     118 in
  • 13m³ (17yd³) - Buckets - Loader
    Capacity
     17 yd³
    Width
     162 in
    Weight
     13945 lb
  • 18m³ (23.5yd³) Iron Ore - Buckets - Mining Shovels

     -

    -
  • 1.2 m3 (1.6 yd3), ISO Coupler, Bolt-On Teeth - Buckets - Compact Wheel Loader
    Rated Capacity
     1.9 yd³
    Width
     95.6 in
    Weight
     1168.9 lb
  • T109 Manual Side Shift - Trenchers
    Overall Length
     92.4 in
    Overall Height
     30.9 in
    Overall Width
     56.1 in
  • 2738mm (108in) - Forks
    Fork Width
     95 in
    Inside Height
     75 in
    Weight
     22921 lb
  • 1566 mm (62 in) - Fork Accessories

     -

    -
  • C0.5 - Industrial
    Maximum Power
     13.7 HP
    Rated Speed
     2800-3600 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     57 kg (126 lb)
  • 1812 mm (71 in), Fusion™ - Forks
    Carriage Width
     71.3 in
    Grapple Height
     102.6 in
    Grapple Weight
     3860.3 lb
  • 3.66 m (12 ft) - Snow Pushes
    Weight
     2634.5 lb
    Overall Height
     42.8 in
    Working Width
     144 in
  • MX250 Microprocessor Controller - Electric Power
    Rating Range
     Switch Dependent
    Transfer Type
     Application Dependent
    Switch Type
     Application Dependent
  • 3.0 m3 (3.9 yd3), Fusion™, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     4 yd³
    Width
     108.1 in
    Weight
     2689.6 lb
  • C27 - Industrial
    Maximum Power
     1050 HP
    Rated Speed
     1800 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     6625 lb
  • 3.66 m (12 ft) - Snow Pushes
    Weight
     2932.1 lb
    Overall Height
     44.4 in
    Working Width
     144 in
  • G3516C - Electric Power
    Fuel Type
     Natural Gas
    Frequency
     50 / 60 Hz
  • 1803 mm (71 in) - Bale Grabs
    Overall Width
     55.2 in
    Overall Height
     34.4 in
    Maximum Opening Width
     71 in
  • AP600F - Asphalt Pavers
    Gross Power
     173 HP
    Operating Weight - Paver Only
     30522 lb
    Standard Paving Range - SE50 V, SE50 VT
     2.55 - 5.0 m (8' 4" - 16' 4")
  • CS64B - Compactors
    Gross Power
     131 HP
    Operating Weight - With Cab
     26569 lb
    Compaction Width
     84 in
  • H115 GC S - Hammers
    Impact Energy Class
     2212 ft-lb
    Blows per Minute
     450-800
    Maximum Operating Weight
     2928.2 lb
  • BP118C - Brooms
    Overall Width
     90.4 in
    Sweeping Width
     72 in
    Brush Diameter
     26 in
  • LT118 - Tillers
    Length
     37.6 in
    Height
     29.7 in
    Overall Width
     89.4 in
  • 1.9 m3 (2.5 yd3), Fusion™ Coupler, Bolt-On Teeth - Buckets - Compact Wheel Loader
    Rated Capacity
     2.5 yd³
    Width
     95.9 in
    Weight
     1618.2 lb
  • 3.2 m3 (4.2 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     4.2 yd³
    Width
     108.1 in
    Weight
     2841.8 lb
  • 239D3 - Skid Steer Loaders
    Gross Power - SAE J1995
     67.1 HP
    Operating Weight
     7434 lb
  • 427F2 - Backhoe Loaders
    Power - Net
     70 HP
    Operating Weight - Nominal
     17875 lb
    Operating Weight - Maximum
     24251 lb
  • 6.4m³ (8.3yd³) Performance Series - Buckets - Loader
    Capacity
     8.3 yd³
    Width
     157 in
    Weight
     16385 lb
  • 1.6 m3 (2.1 yd3), Weld-On Teeth - Buckets - Compact Wheel Loader
    Rated Capacity
     2.1 yd³
    Width
     95.8 in
    Weight
     1377.9 lb
  • 3.66 m (12 ft) - Snow Pushes
    Weight
     1995.2 lb
    Overall Height
     38.4 in
    Working Width
     144 in
  • UD440E

     -

    -
  • 1100 mm (43 in) - Buckets - Excavator
    Rated Capacity
     3.88 yd³
    Width
     43.3 in
    Weight
     293.6 lb
  • RM300 - Road Reclaimers
    Gross Power
     350 HP
    Maximum Operating Weight
     53911 lb
    Cutting/Mixing Width
     96 in
  • 444F2 - Backhoe Loaders
    Power - Net
     95.2 HP
    Operating Weight - Nominal
     21178 lb
    Operating Weight - Maximum
     25353 lb
  • C280-6 - Marine Power Systems
    Maximum Rating
     1820 ekW (2275 kVA)
    Minimum Rating
     1760 ekW (2200 kVA)
    Frequency
     50 Hz or 60 Hz
  • M314F - Excavators

     -
    Operating Weight*
     14 360 to 15 950 kg (31,658 to 35,164 lb)
  • 13m³ (17yd³) - Buckets - Loader
    Capacity
     17 yd³
    Width
     203 in
    Weight
     38320 lb
  • CM32E - Electric Power
    Minimum Rating
     3085 kWe
    Maximum Rating
     4630 kWe
    Emissions/Fuel Strategy
     (WB) Cert stage 1 and 2
  • 24 - Motor Graders
    Base Power (1st Gear) - Net
     535 HP
    Operating Weight - Typically Equipped
     161695 lb
    Blade Width
     24 ft
  • QA441/e

     -

    -
  • 1576 mm (62 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.56 ft³
    Width
     62 in
    Weight
     529.1 lb
  • 325F L (2017) - Excavators

     -
    Operating Weight
     60032 lb
  • 3.1m³ (4yd³) - Buckets - Loader
    Capacity
     4 yd³
    Width
     117 in
    Weight
     3500 lb
  • DG350 GC (3 phase) - Electric Power
    Fuel Type
     Natural Gas
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • C3.3 (50 Hz) - Electric Power
    Minimum Rating
     24.0 kVA
    Maximum Rating
     65.0 kVA
    Emissions/Fuel Strategy
     Non Regulated, EU Stage II and EU Stage IIIA
  • AP655F Steel Track - Asphalt Pavers
    Gross Power
     205 HP
    Operating Weight - SE60 V Screed only
     7495 lb
    Standard Paving Range - SE60 V, SE60 V XW, SE60 VT XW
     3.0-6.0 m (9' 10" - 19' 6")
  • 1.7 m3 (2.2 yd3), Fusion™ Coupler, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
     2.2 yd³
    Width
     94.5 in
    Weight
     1519 lb
  • 315 - Excavators

     -
    Operating Weight
     34000 lb
  • PM822 - Cold Planers
    Rated Power
     800.6 HP
    Operating Weight
     80910 lb
    Milling Width
     88 in
  • 3.4m³ (4.5yd³) Fertilizer - Buckets - Loader
    Capacity
     4.5 yd³
    Width
     105 in
    Weight
     2860 lb
  • 1500 mm (59 in) - Buckets - Excavator
    Rated Capacity
     18.4 yd³
    Width
     59.1 in
    Weight
     761.9 lb
  • SE60 VT XW Tamper Bar Screed - Asphalt Pavers
    Standard Weight
     9898 lb
    Standard Paving Range
     3.0 m - 6.0 m (10' - 19' 6")
  • 340F UHD - Excavators

     -
    Operating Weight
     117103 lb
  • 773E - Off-Highway Trucks
    Gross Power - SAE J1995
     710 HP
    Nominal Payload Class (100%)
     61 ton (US)
    Top Speed - Loaded
     38.6 mile/h
  • 1042 mm (41 in) - Fork Accessories

     -

    -
  • BA30 Manual - Brooms
    Overall Width
     126 in
    Sweeping Width
     118.1 in
    Brush Diameter
     36 in
  • DG100-2 (3 Phase) - Electric Power
    Fuel System
     Natural Gas, LP Vapor
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • M 46 DF - Marine Power Systems
    Maximum Rating
     8329 kWe (10422 kVA)
    Minimum Rating
     5179 kWe (6480 kVA)
  • DG250 GC (3 phase) - Electric Power
    Fuel System
     Carbureter, Down Draft
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • 1576 mm (62 in) w/Spill Guard, Bolt-On Teeth - Buckets - Skid Steer Loader
    Capacity
     0.39 yd³
    Width
     62 in
    Weight
     817.9 lb
  • 1576 mm (62 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.44 yd³
    Width
     62 in
    Weight
     451.9 lb
  • 2133 mm (84 in) - Bale Grabs
    Overall Width
     55.2 in
    Overall Height
     34.4 in
    Maximum Opening Width
     84 in
  • 1.0 m3 (1.3 yd3), Bolt-On Teeth - Buckets - Compact Wheel Loader
    Capacity
     1.3 yd³
    Width
     80.1 in
    Weight
     864 lb
  • 316F L - Excavators
    Gross Power - SAE J1995
     91 kW (122 hp/123 PS)
    Operating Weight
     39029 lb
  • H110 S - Hammers
    Impact Energy Class
     2000 ft·lbf
    Blows per Minute
     450-1000
    Maximum Operating Weight
     2381 lb
  • 1.0 m3 (1.3 yd3), Pin On - Buckets - Backhoe Front
    Capacity
     1.29 yd³
    Width
     94.7 in
    Weight
     988.1 lb
  • 9m³ (11.8yd³) Iron Ore - Buckets - Loader
    Capacity
     11.8 yd³
    Width
     193 in
    Weight
     24577 lb
  • 1312 mm (52 in) - Fork Accessories

     -

    -
  • 3516C IMO II - Marine Power Systems
    Power Range
     1650-3386 bhp (1230-2525 bkW)
    Speed Range
     1200-1800 rpm
    Emissions
     IMO II
  • 232D3 - Skid Steer Loaders
    Gross Power - SAE J1995
     67.1 HP
    Operating Weight
     6514 lb
    Rated Operating Capacity
     1900 lb
  • 610 mm (24 in) Extension - Auger Accessories

     -

    -
  • HMF210 - Flail Mowers

     -

    -
  • 3.05 m (10 ft) - Snow Pushes
    Weight
     1995.2 lb
    Overall Height
     38.4 in
    Working Width
     120 in
  • UJ440i

     -

    -
  • DE220 GC - Electric Power
    Minimum Rating
     217 kVA
    Maximum Rating
     217 kVA
    Emissions/Fuel Strategy
     Non Regulated
  • 816K - Compactors
    Gross Power
     284 HP
    Operating Weight
     56899 lb
  • 24-220 kVA SA Lvl 2 Enclosure - Generator Set Enclosures

     -

    -
  • 3.4m³ (4.5yd³) - Buckets - Loader
    Capacity
     4.5 yd³
    Width
     106 in
    Weight
     2628 lb
  • 229 mm (9 in) - Augers
    Diameter
     9 in
    Weight
     75 lb
    Overall Length
     48.7 in
  • CM25E - Electric Power
    Minimum Rating
     1940 kWe
    Maximum Rating
     2910 kWe
    Emissions/Fuel Strategy
     (WB) Cert stage 1 and 2
  • 416D Backhoe Loaders Tilting - Couplers - Backhoe Rear
    Weight
     242.3 lb
    Coupler Class
     1/4 yd
  • 12m³ (15.7yd³) Iron Ore - Buckets - Mining Shovels

     -

    -
  • 5.2m³ (6.75yd³) Performance Series - Buckets - Loader
    Capacity
     6.75 yd³
    Width
     126 in
    Weight
     5267 lb
  • 2.0 m3 (2.6 yd3), Fusion™ Coupler, Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
     2.6 yd³
    Width
     94.5 in
    Weight
     1618.2 lb
  • BU118 - Brooms
    Overall Width
     83.3 in
    Sweeping Width
     73.4 in
    Brush Diameter
     26 in
  • DE88 GC (50 Hz) - Electric Power
    Minimum Rating
     88 kVA
    Maximum Rating
     88 kVA
    Emissions/Fuel Strategy
     Non Regulated
  • 1000 mm (40 in) - Buckets - Excavator
    Capacity
     56.6 l
    Width
     39.4 in
    Weight
     93.7 lb
  • C18 ACERT IMO II - Marine Power Systems
    Power Range
     454-715 bhp (339-533 bkW)
    Speed Range
     1800-2100 rpm
    Emissions
     IMO II, EU IIIA
  • 23.32 m³ (30.5 yd³) - Blades
    Capacity
     30.5 yd³
    Width
     194 in
  • 1397 mm (55 in) - Fork Accessories

     -

    -
  • A41 - Augers
    Drive Shaft Torque at Maximum Pressure
     3038.8 lb/ft
    Drive Method
     Gerotor Motor - Single Planetary Reduction
    Mounting Bracket Design
     Mini Excavator
  • C2.2 - Industrial
    Maximum Power
     66 HP
    Rated Speed
     2200-3000 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     184-194 kg (406-427.7 lb)
  • DE50 GC (50 Hz) - Electric Power
    Minimum Rating
     50.0 kVA
    Maximum Rating
     50.0 kVA
    Emissions/Fuel Strategy
     Non Regulated
  • G3412 - Industrial
    Maximum Power
     637 HP

    -
    Weight - Net Dry
     2141 kg (4720 lb)
  • BA118C Hydraulic - Brooms
    Overall Width
     103.8 in
    Sweeping Width
     83.4 in
    Brush Diameter
     32.1 in
  • 305.5E2 CR with Swing Boom - Excavators
    Gross Power - ISO 14396
     45.7 HP
    Operating Weight
     11958 lb
  • RUBBER TRACKS

     -

    -
  • 950 GC - Wheel Loaders
    Maximum Net Power - 1,700 rpm - ISO 9249
     225 HP
    Operating Weight
     41554 lb
    Bucket Capacities
     2.9-4.4 m³ (3.75-5.75 yd³)
  • 3508B - Industrial
    Maximum Power
     1100 HP
    Rated Speed
     1800 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     4309 kg (9500 lb)
  • 988K Block Handler Arrangement - Wheel Loaders
    Net Power
     541 HP
    Operating Weight
     135602 lb
  • 3516E - Industrial
    Maximum Power
     2100 HP
    Rated Speed
     1650 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     18025 lb
  • CP74B - Compactors
    Gross Power
     173.7 HP
    Operating Weight - With Cab
     36048 lb
    Compaction Width
     84 in
  • C4.4 - Marine Power Systems
    Maximum Rating
     99.0 ekW (123 kVA)
    Minimum Rating
     36.0R ekW (45 kVA)
    Frequency
     50 Hz or 60 Hz
  • 639 mm (25 in) - Rippers
    Overall Length
     32.8 in
    Weight
     240.3 lb
    Width
     16.5 in
  • ENGINE OIL FILTERS

     -

    -
  • 1.15 m3 (1.5 yd3), Pin On - Buckets - Backhoe Front
    Capacity
     1.5 yd³
    Width
     94.7 in
    Weight
     1056 lb
  • 7m (9.2yd) Standard Rock - Buckets - Mining Shovels

     -

    -
  • 0.95 m3 (1.25 yd3), IT Coupler - Buckets - Backhoe Front
    Capacity
     1.26 yd³
    Width
     89.1 in
    Weight
     957 lb
  • 861 mm (34 in) - Rippers
    Overall Length
     42 in
    Weight
     235.9 lb
    Width
     13.5 in
  • SOME CAT® ENGINE PARTS

     -

    -
  • 2.3m³ (3yd³) - Buckets - Loader
    Capacity
     3 yd³
    Width
     100 in
    Weight
     3160 lb
  • A68 - Augers
    Drive Shaft Torque at Maximum Pressure
     5034.6 lb/ft
    Drive Method
     Gerotor Motor - Double Planetary Drive
    Mounting Bracket Design
     Skid Steer Loader, Compact Wheel Loader
  • 990K Steel Mill Arrangement - Wheel Loaders
    Net Power
     699 HP
    Operating Weight
     204693 lb
    Bucket Capacities
     8.6-9.2 m3 (11.2-12.0 yd3)
  • 973K WH - Track Loaders
    Net Power - Rated - ISO 9249/SAE J1349
     275 HP
    Operating Weight
     64319 lb
    Capacity - General Purpose Landfill
     6.4 yd³
  • 4.6m³ (6yd³) Quarry - Buckets - Loader
    Capacity - Adapters
     6 yd³
    Width
     138 in
    Weight
     8125 lb
  • 3.8m³ (5yd³) - Buckets - Loader
    Capacity
     5 yd³
    Width
     121 in
    Weight
     3650 lb
  • 3.4m³ (4.5yd³) - Buckets - Loader
    Capacity
     4.5 yd³
    Width
     114 in
    Weight
     3020 lb
  • C4.4 - Industrial
    Maximum Power
     111.3 HP
    Rated Speed
     2200-2400 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     291-306 kg (640-674.6 lb)
  • C18 - Industrial
    Maximum Power
     630 HP
    Rated Speed
     1800-2100
    Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     2197.1 kg (4843.7 lb)
  • 4137 mm (163 in) Material Handling Arm, Fusion - Material Handling
    Maximum Load Rating
     19000 lb
    Retracted Length
     109 in
    Extended Length
     163 in
  • MP345 Pulverizer Jaw - Multi-Processors

     -

    -
  • 0.8 m3 (1.0 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     1 yd³
    Width
     74.4 in
    Weight
     1177 lb
  • UD550E

     -

    -
  • C1.5 - Marine Power Systems
    Maximum Rating
     13 ekW (16.5 kVA)
    Minimum Rating
     10 ekW (10 kVA)
    Frequency
     50 Hz or 60 Hz
  • 10.7m³ (14yd³) - Buckets - Loader
    Capacity - Adapters
     14 yd³
    Width
     200 in
    Weight
     25485 lb
  • 13.4m³ (17.5yd³) - Buckets - Loader
    Capacity
     17.5 yd³
    Width
     172 in
    Weight
     16410 lb
  • DE65 GC (60 Hz) - Electric Power
    Minimum Rating
     60 ekW
    Maximum Rating
     60 ekW
    Emissions/Fuel Strategy
     Non Regulated
  • 415-440 Backhoe Loaders 1/4 Yard - Couplers - Backhoe Rear
    Weight
     191.8 lb

    -
  • H115 S - Hammers
    Impact Energy Class
     3000 ft·lbf
    Blows per Minute
     370-800
    Maximum Operating Weight
     3219 lb
  • 52.0 m³ (68.0 yd³) - Blades
    Capacity
     68 yd³
    Width
     265 in
  • 1524 mm (60 in) - Fork Accessories

     -

    -
  • 10.7m³ (14yd³) - Buckets - Loader
    Capacity
     14 yd³
    Width
     203 in
    Weight
     30247 lb
  • 1.1 m3 (1.4 yd3), Bolt-On Teeth - Buckets - Compact Wheel Loader
    Capacity
     1.4 yd³
    Width
     81.1 in
    Weight
     924 lb
  • B9s - Hammers

     -

    -
  • MP345 Demolition Jaw - Multi-Processors
    Length
     93 in
    Height
     91 in
    Width
     40 in
  • 300.9D VPS & HPU300 - Excavators
    Gross Power
     13 HP
    Operating Weight
     2399 lb
  • 1576 mm (62 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.47 yd³
    Width
     62 in
    Weight
     440.9 lb
  • WP and SAE D40-6 to D200-2 US - Generator Set Enclosures

     -

    -
  • 1.03 m3 (1.35 yd3) Pin On, Bolt-On Teeth - Buckets - Backhoe Front
    Capacity
     1.29 yd³
    Width
     89.1 in
    Weight
     1642 lb
  • 53.5 m³ (70.0 yd³) - Blades
    Capacity
     70 yd³
    Width
     287 in
  • C2.2 - Industrial
    Maximum Power
     67.1 HP
    Rated Speed
     2800 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     230 kg (507 lbs)
  • CW-30 - Couplers - Excavator
    Weight
     462 lb
    Width
     22 in
    Load Rating, Hoisting Hook
     11 ton (US)
  • 2.7 m3 (3.5 yd3), Fusion™, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     3.5 yd³
    Width
     108.1 in
    Weight
     2638.9 lb
  • 777G WTR Bare chassis - Off-Highway Trucks

     -

    -
  • VM 43 C - Marine Power Systems
    Power Range
     12000 - 16800 kW
    Speed Range
     500-514 rpm
    Emissions
     IMO II
  • 1070 mm (42 in) - Forks
    Carriage Width
     45.8 in
    Carriage Height
     36.8 in
    Carriage Weight
     211.6 lb
  • C280-8 - Marine Power Systems
    Maximum Rating
     2420 ekW (3025 kVA)
    Minimum Rating
     2350 ekW (2938 kVA)
    Frequency
     50 Hz or 60 Hz
  • 8.6m³ (11.25yd³) Performance Series - Buckets - Loader
    Capacity - Adapters
     11.25 yd³
    Width
     184 in
    Weight
     19798 lb
  • CG132B-16 - Electric Power
    Fuel Type
     Natural Gas
    Frequency
     50 Hz
  • 8.6m³ (11.25yd³) Performance Series - Buckets - Loader
    Capacity
     11.25 yd³
    Width
     182 in
    Weight
     15977 lb
  • 4m³ (5.25yd³) - Buckets - Loader
    Capacity - Adapters
     5.25 yd³
    Width
     128 in
    Weight
     6501 lb
  • 914 mm (36 in), Pin On - Buckets - Backhoe Rear
    Capacity
     10.3 ft³
    Width
     36 in
    Weight
     416.7 lb
  • 34m³ (44.5yd³) Standard Rock - Buckets - Mining Shovels

     -

    -
  • 988K Steel Mill Arrangement - Wheel Loaders
    Net Power
     541 HP
    Operating Weight
     112574 lb
    Bucket Capacities
     5.4-6.3 m3 (7.0-8.3 yd3)
  • BRX418 Industrial - Brushcutters
    Overall Width
     75.2 in
    Cutting Width
     72 in
    Maximum Cutting Diameter
     8 in
  • TH314D - Telehandlers
    Maximum Lift Height
     45.4 ft
    Operating Weight - With Carriage and Forks
     22256 lb
    Rated Load Capacity
     7937 lb
  • 457 mm (18 in) - Buckets - Excavator
    Rated Capacity
     2.9 yd³
    Width
     18 in
    Weight
     180.8 lb
  • 1.0 m3 (1.31 yd3), IT Coupler, Bolt-On Cutting Edge - Buckets - Backhoe Front
    Capacity
     1.31 yd³
    Width
     94.7 in
    Weight
     1168.9 lb
  • 600 mm (24 in) - Buckets - Excavator
    Capacity
     1.9 ft³
    Width
     23.6 in
    Weight
     100.1 lb
  • C7.1 - Industrial
    Maximum Power
     275 HP
    Rated Speed
     2200-2500 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     524 kg (1155 lb)
  • 406 mm (16 in), Pin Lock - Buckets - Backhoe Rear
    Capacity
     4.2 ft³
    Width
     16 in
    Weight
     297.6 lb
  • G3516H - Electric Power
    Fuel System
     Natural Gas
    Frequency
     50 / 60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Stationary Emergency Certified
  • 12.2m³ (16yd³) - Buckets - Loader
    Capacity
     16 yd³
    Width
     200 in
    Weight
     28301 lb
  • Pin Grabber Coupler - Trenching Profile (CB-Linkage): 389-7526 - Couplers - Excavator
    Weight
     949 lb
    Width - Machine Interface
     19.3 in
    Lifting Eye Working Load Limit
     30865 ton (US)
  • 460 mm (18 in) - Buckets - Excavator
    Capacity
     1.89 ft³
    Width
     18.1 in
    Weight
     118.8 lb
  • DG175 GC (3 phase) - Electric Power
    Fuel System
     Carburetor, Down Draft
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • A11 Long Stick - Augers
    Drive Shaft Torque at Maximum Pressure
     815 lb/ft
    Drive Method
     Gerotor Motor - Direct Drive
    Mounting Bracket Design
     Mini Excavator
  • 309 CR VAB - Excavators
    Gross Power - ISO 14396
     74.3 HP
    Operating Weight
     20731 lb
  • 5.7m³ (7.5yd³) Performance Series - Buckets - Loader
    Capacity
     7.5 yd³
    Width
     134 in
    Weight
     6129 lb
  • 1290mm (51in) Ripper - Rippers
    Overall Length
     67 in
    Weight
     1717 lb
    Width
     22.4 in
  • BA118C Manual - Brooms
    Overall Width
     103.8 in
    Sweeping Width
     83.4 in
    Brush Diameter
     32.1 in
  • 0.9 m3 (1.2 yd3), Bolt-On Teeth - Buckets - Compact Wheel Loader
    Capacity
     1.2 yd³
    Width
     81.9 in
    Weight
     1230 lb
  • R2900 - Underground - Hard Rock
    Gross Power - ISO 14396
     409 HP

    -
    Nominal Payload Capacity
     37920 lb
  • 3512C Tier 3 - Marine Power Systems
    Power Range
     1340-2366 bhp (1000-1765 bkW)
    Speed Range
     1600-1800 rpm
    Emissions
     EPA Tier 3, IMO II
  • 3616 - Industrial
    Maximum Power
     6598 HP
    Rated Speed
     800-1000 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     29,950 kg (65,900 lb)
  • T112 Manual Side Shift - Trenchers
    Overall Length
     106.5 in
    Overall Height
     30.9 in
    Overall Width
     74.8 in
  • 300 mm (12 in) - Buckets - Excavator
    Capacity
     1.4 ft³
    Width
     11.8 in
    Weight
     111.3 lb
  • 4 m (13 ft) Truss Boom - Material Handling

     -

    -
  • 3606 - Industrial
    Maximum Power
     2481 HP
    Rated Speed
     750-1000 rpm
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments
     15,680 kg (34,500 lb)
  • 2490 mm (98 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     1.22 yd³
    Width
     98 in
    Weight
     822.3 lb
  • 4.1 m3 (5.4 yd3), Fusion™, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     5.4 yd³
    Width
     119.4 in
    Weight
     4687 lb
  • CAT® SYSTEMONE

     -

    -
  • 3516 - Industrial
    Maximum Power
     1985 HP
    Rated Speed
     1460-1750 rpm
    Weight - Approximate, Net Dry (Basic Operating Engine Without Optional Attachments)
     8074 kg (17800 lb)
  • CW-05 - Couplers - Excavator
    Weight
     55 lb
    Width
     7 in
    Load Rating, Hoisting Hook
     2.2 ton (US)
  • 676 mm (27 in) - Rippers
    Overall Length
     32.4 in
    Weight
     134 lb
    Width
     11.1 in
  • 2700mm (106in), Fusion™ - Buckets - Loader

     -
    Width
     106 in
    Weight
     2474 lb
  • 3512E Tier 4 / IMO III - Marine Power Systems
    Power Range
     1341-2549 bhp (1000-1901 bkW)
    Speed Range
     1600-1800 rpm
    Emissions
     U.S. EPA Tier 4 Final, IMO III
  • 308E2 CR - Excavators
    Gross Power - ISO 14396
     66.6 HP
    Operating Weight
     18519 lb
  • CD8 - Split Drum - Compactors
    Gross Power
     100 HP
    Operating Weight
     18497 lb
    Standard Compaction Width
     59 in
  • 785D - Off-Highway Trucks
    Gross Power - SAE J1995
     1450 HP

    -
    Top Speed - Loaded
     34 mile/h
  • 305 mm (12 in), Pin On - Buckets - Backhoe Rear
    Capacity
     2.8 ft³
    Width
     12 in
    Weight
     238.1 lb
  • 2337 mm (92 in), SMART - Blades
    Overall Width
     92 in
    Length
     40.5 in
  • 2.44 m (8 ft) - Snow Pushes
    Weight
     1036.2 lb
    Overall Height
     39.1 in
    Working Width
     96 in
  • 14.5m³ (19yd³) - Buckets - Loader
    Capacity
     19 yd³
    Width
     175 in
    Weight
     15400 lb
  • 3.6m³ (4.75yd³) - Buckets - Loader
    Capacity
     4.75 yd³
    Width
     120 in
    Weight
     9695 lb
  • Cat XLM Switchgear - Electric Power
    Configuration
     Configurable PLC based switchgear capable of controlling and monitoring multiple generator sets, tie, utility and load breakers for utility paralleling applications
    Modes of Operation
     Emergency Standby, Utility Import/Export, Peak shaving, and base load operations with redundant controls and components. Closed transition to/from generator power
    Application
     LV and MV ( 208V - 38 kV
  • 3412C (50 Hz) - Electric Power
    Minimum Rating
     680 kVA
    Maximum Rating
     900 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption
  • G317 GC Demolition & Sorting Grapple: 587-8721 - Grapples
    Capacity
     0.72 yd³
    Weight - Including Bracket
     3080 lb
  • CB34B - Compactors
    Gross Power
     49.1 HP
    Operating Weight
     8157 lb
    Standard Compaction Width
     51 in
  • CW-55 - Couplers - Excavator
    Weight
     1540 lb
    Width
     33.2 in
    Load Rating, Hoisting Hook
     22 ton (US)
  • 610 mm (24 in), Pin On - Buckets - Backhoe Rear
    Capacity
     6.2 ft³
    Width
     24 in
    Weight
     332.9 lb
  • 3516C (50 Hz) - Electric Power
    Minimum Rating
     2500 kVA
    Maximum Rating
     2750 kVA
    Emissions/Fuel Strategy
     Low Fuel, Low Emissions
  • D9T - Dozers
    Flywheel Power
     436 HP
    Operating Weight
     106618 lb
  • S2070 Straight Scrap & Demolition Shear - Shears
    Length
     153 in
    Height
     70 in
    Width
     28 in
  • P225 - Pulverizers
    Capacity - Concrete Thickness
     29.5 in
    Width
     24.6 in
    Weight
     5467 lb
  • C7.1 Tier 3 / IMO II - Marine Power Systems

     -

    -
    Aspiration
     Turbocharged-aftercooled aspiration
  • 330 - Excavators
    Engine Power - ISO 9249
     273 HP
    Operating Weight
     68100 lb
  • 2036 mm (80 in) w/Spill Guard, Bolt-On Teeth - Buckets - Skid Steer Loader
    Capacity
     0.52 yd³
    Width
     80.2 in
    Weight
     970 lb
  • M 25 E - Marine Power Systems
    Maximum Rating
     3024 kWe (3938 kVA)
    Minimum Rating
     2016 kWe (2625 kVA)
  • DG150-2 (3 Phase) - Electric Power
    Fuel System
     Natural Gas / LP Vapor
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • C9 - Industrial
    Maximum Power
     350 HP
    Rated Speed
     1800-2200 rpm
    Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     1490 kg (3285 lb)
  • CG170-12 - Electric Power
    Fuel Type
     Natural Gas, Biogas, Coal Gas
    Frequency
     50 or 60 Hz
  • 8.5m³ (11.1yd³) Heavy Rock - Buckets - Mining Shovels

     -

    -
  • 1.0 m3 (1.3 yd3), IT Coupler, Bolt-On Teeth - Buckets - Backhoe Front
    Capacity
     1.29 yd³
    Width
     89.1 in
    Weight
     1653.9 lb
  • DE65 GC (50 Hz) - Electric Power
    Minimum Rating
     65.0 kVA
    Maximum Rating
     65.0 kVA
    Emissions/Fuel Strategy
     Non Regulated
  • C280-12 - Marine Power Systems
    Maximum Rating
     3640 ekW (4550 kVA)
    Minimum Rating
     3520 ekW (4400 kVA)
    Frequency
     50 Hz or 60 Hz
  • 2.3 m3 (3.0 yd3), Pin On - Buckets - Loader
    Capacity
     3 yd³
    Width
     99.5 in
    Weight
     1966.5 lb
  • 3516B (50 Hz) - Electric Power
    Minimum Rating
     2000 kVA
    Maximum Rating
     2500 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption, Low Emissions
  • C8.7 - Marine Power Systems
    Power Range
     641 BHP
    Speed Range
     2300 rpm
    Emissions
     EPA Tier 3 Recreational & Commercial, IMO II, EU Stage IIIA (EU IW)
  • BA25 Hydraulic - Brooms
    Overall Width
     106.3 in
    Sweeping Width
     98.4 in
    Brush Diameter
     27.6 in
  • DG200 GC (3 phase) - Electric Power
    Fuel System
     Carburetor, Down Draft
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • QE342/e

     -

    -
  • 2419mm (96in) - Forks
    Fork Width
     96 in
    Inside Height
     58 in
    Weight
     5160 lb
  • 7.7m³ (10yd³) Performance Series - Buckets - Loader
    Capacity
     10 yd³
    Width
     158 in
    Weight
     11713 lb
  • 4.87 m (16 ft) - Snow Pushes
    Weight
     3421.6 lb
    Overall Height
     44.4 in
    Working Width
     192 in
  • COOLANTS

     -

    -
  • SW345B, 76 mm (3 in) - Saws
    Length
     85 in
    Overall Height
     57 in
    Overall Width
     73 in
  • 1370 mm (54 in) - Fork Accessories

     -

    -
  • C18 - Industrial
    Maximum Power
     800 HP
    Rated Speed
     1500-2100 rpm
    Weight - Approximate, Net Dry (Basic Operating Engine Without Optional Attachments)
     1953 kg (4306 lb)
  • 7.7m³ (10yd³) Performance Series - Buckets - Loader
    Capacity
     10 yd³
    Width
     158 in
    Weight
     11603 lb
  • 7m³ (9.2yd³) Standard Rock - Buckets - Mining Shovels

     -

    -
  • 1220 mm (48 in) - Fork Accessories

     -

    -
  • 1.0 m3 (1.3 yd3), Bolt-On Teeth - Buckets - Compact Wheel Loader
    Capacity
     1.3 yd³
    Width
     80.2 in
    Weight
     865.5 lb
  • C280-6 - Marine Power Systems
    Power Range
     2320-2722 bhp (1730-2030 bkW)
    Speed Range
     900-1000 rpm
    Emissions
     IMO II
  • P215 - Pulverizers
    Capacity - Concrete Thickness
     26 in
    Width
     23 in
    Weight
     3710 lb
  • GSV520 GC 5-Tine, 400-Liter Orange Peel Grapple - Grapples
    Capacity
     0.5 yd³
    Operating Weight
     NAN lb
  • 1.6 m3 (2.1 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Rated Capacity
     2.1 yd³
    Width
     94.5 in
    Weight
     1492.1 lb
  • 3516 (50 Hz) with Upgradeable Package - Electric Power
    Minimum Rating
     1600 kVA
    Maximum Rating
     2000 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption, Low Emissions
  • 1200 mm (47 in) - Buckets - Excavator
    Rated Capacity
     14.5 yd³
    Width
     47.2 in
    Weight
     615.3 lb
  • MP365 Demolition Jaw - Multi-Processors
    Length
     105 in
    Height
     103 in
    Width
     43 in
  • 1400 mm (55 in) - Buckets - Excavator
    Capacity
     197.1 l
    Width
     55.1 in
    Weight
     259.2 lb
  • QI442/HS

     -

    -
  • DG80-2 (3 Phase) - Electric Power
    Fuel System
     Natural Gas
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • 3.4m³ (4.5yd³) - Buckets - Loader
    Capacity
     4.5 yd³
    Width
     106 in
    Weight
     2392 lb
  • 352 UHD - Excavators

     -
    Operating Weight
     151483 lb
  • M 20 C - Marine Power Systems
    Power Range
     1020-1800 kW
    Speed Range
     900-1000 rpm
    Emissions
     IMO II / IMO III with SCR
  • C7.1 Tier 3 / IMO II - Marine Power Systems
    Maximum Rating
     425 BHP
    Rated Engine Speed
     2300 - 2700 rpm
    Emissions
     U.S. EPA Tier 3 / IMO II emissions certified (commercial), RCD 2016 compliant, EU Stage IIIA compliant, CCNR Stage II through reciprocity with EU Stage IIIA
  • LR18B - Rakes
    Bucket Capacity - Struck
     0.4 yd³
    Weight
     1439.6 lb
    Length
     63.8 in
  • US440I

     -

    -
  • 2.5 m3 (3.3 yd3), Pin On - Buckets - Loader
    Capacity
     3.2 yd³
    Width
     99.5 in
    Weight
     2156.1 lb
  • 1000 mm (39 in) - Buckets - Excavator
    Capacity
     6 ft³
    Width
     39.4 in
    Weight
     258.6 lb
  • CS74B - Compactors
    Gross Power
     173.7 HP
    Operating Weight - With Cab
     35264 lb
    Compaction Width
     84 in
  • C13, C15, C18 WP Enclosure. 350-600 kW 60 Hz - Generator Set Enclosures

     -

    -
  • C18 - Industrial
    Maximum Power
     630 HP
    Rated Speed
     1800-2000 rpm
    Weight - Approximate, Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     2113-2650 kg (4658-5842 lb)
  • HM415C - Mulchers
    Overall Width
     74.1 in
    Weight
     2960.8 lb
    Required Hydraulics
     XHP / XE
  • VM 32 C - Marine Power Systems
    Maximum Rating
     7672 kWe (9600 kVA)
    Minimum Rating
     5754 kWe (7200 kVA)
  • G324 WH Demolition & Sorting Grapple: 587-8988 - Grapples
    Capacity
     2.62 yd³
    Weight
     4861 lb
  • 340F OEM - Excavators

     -

    -
  • QUALITY PARTS AT REDUCED COST

     -

    -
  • QH342/HS

     -

    -
  • 12m³ (15.7yd³) Heavy Rock - Buckets - Mining Shovels

     -

    -
  • 2036 mm (80 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.58 yd³
    Width
     80.2 in
    Weight
     584.2 lb
  • 30.6 m³ (40.0 yd³) - Blades
    Capacity
     40 yd³
    Width
     224 in
  • CW-45 - Couplers - Excavator
    Weight
     946 lb
    Width
     27.6 in
    Load Rating, Hoisting Hook
     15.4 ton (US)
  • 918M - Wheel Loaders
    Net Power
     113 HP
    Operating Weight
     21082 lb
    Bucket Capacities
     1.3-1.9 m³ (1.7-2.5 yd³)
  • Round To Hex Adapter - Auger Accessories

     -

    -
  • UH550E

     -

    -
  • 2.5 m3 (3.3 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     3.3 yd³
    Width
     108.1 in
    Weight
     2581.6 lb
  • 1550 mm (61 in) - Fork Accessories

     -

    -
  • 926M Ag Handler - Wheel Loaders
    Rated Net Power
     154 HP
    Operating Weight
     28647 lb
    Bucket Capacities
     2.1-4.2 m3 (2.7-5.5 yd3)
  • 2.5 m3 (3.3 yd3), Fusion™ Coupler - Buckets - Loader
    Capacity
     3.3 yd³
    Width
     107.4 in
    Weight
     2123 lb
  • DE50 GC (60 Hz) - Electric Power
    Minimum Rating
     45 ekW
    Maximum Rating
     45 ekW
    Emissions/Fuel Strategy
     Non Regulated
  • G212 GC Demolition & Sorting Grapple: 587-8643 - Grapples
    Capacity
     0.52 yd³
    Weight
     1396 lb
  • 1525 mm (60 in) - Forks
    Fork Tine Width
     4 in
    Fork Tine Thickness
     2 in
    Fork Tine Length
     60 in
  • BA25 Hydraulic - Brooms
    Overall Width
     106.3 in
    Sweeping Width
     98.4 in
    Brush Diameter
     27.6 in
  • CTS Series Automatic Transfer Switch - Electric Power
    Rating Range
     40 to 4000A
    Transfer Type
     Open transition
    Switch Type
     Contactor Based
  • GSH520 5-Tine, 500-Liter Orange Peel Grapple - Grapples
    Capacity
     0.65 yd³
    Operating Weight
     3003 lb
  • 1.5 m3 (2.0 yd3), Weld-On Teeth - Buckets - Compact Wheel Loader
    Rated Capacity
     2.3 yd³
    Width
     95.8 in
    Weight
     1490.1 lb
  • 352F L XE - Excavators

     -
    Operating Weight
     113229 lb
  • CP56B - Compactors
    Gross Power
     157 HP
    Operating Weight - With Cab
     25707 lb
    Compaction Width
     84 in
  • AD45B - Underground - Hard Rock
    Gross Power - SAE J1995
     589 HP
    Loaded
     187393 lb
    Nominal Payload Capacity
     99208 lb
  • 1883 mm (74 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.9 yd³
    Width
     74.1 in
    Weight
     665.8 lb
  • 500 mm (20 in) - Buckets - Excavator
    Capacity
     2.1 ft³
    Width
     19.7 in
    Weight
     129 lb
  • 740 EJ - Articulated Trucks
    Gross Power - SAE J1995
     511 HP
    Rated Payload
     42 ton (US)
    Heaped (SAE 2:1)
     30.1 yd³
  • M315F - Excavators

     -
    Operating Weight*
     16 700 to 17 960 kg (36,817 to 39,595 lb)
  • 2.5 m3 (3.3 yd3), Fusion™, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     3.2 yd³
    Width
     108.1 in
    Weight
     2533.1 lb
  • 953K - Track Loaders
    Net Power (Rated) - SAE J1349/ISO 9249
     154 HP
    Operating Weight
     33852 lb
    Capacity - General Purpose
     2.4 yd³
  • 308 CR - Excavators
    Gross Power - ISO 14396
     74.3 HP
    Operating Weight
     20678 lb
  • CM46DF V-Type - Electric Power
    Minimum Rating
     10580 kWe
    Maximum Rating
     14110 kWe
    Emissions/Fuel Strategy
     (WB) Cert stage 1 and 2
  • 696mm (27in) Ripper - Rippers
    Overall Length
     36.5 in
    Weight
     353 lb
    Width
     14.2 in
  • MX350 Controller - Electric Power
    Rating Range
     Switch Dependent
    Transfer Type
     Application Dependent
    Switch Type
     Application Dependent
  • QE241

     -

    -
  • 938M Waste Handler - Wheel Loaders
    Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4)
     184 HP
    Operating Weight
     38555 lb
    Bucket Capacities
     3.0-5.0 m3 (3.9-6.5 yd3)
  • GSH525 5-Tine, 1150-Liter Orange Peel Grapple - Grapples
    Capacity
     1.5 yd³
    Operating Weight
     NAN lb
  • 1219 mm (48 in) - Forks
    Fork Tine Width
     5 in
    Fork Tine Thickness
     2.36 in
    Fork Tine Length
     48 in
  • LT114 - Tillers
    Length
     37.6 in
    Height
     29.7 in
    Overall Width
     70.4 in
  • 15m³ (19.5yd³) Serrated Edge - Buckets - Loader
    Capacity
     19.5 yd³
    Width
     200 in
    Weight
     30615 lb
  • DE165 GC (60 Hz) - Electric Power
    Minimum Rating
     150 ekW
    Maximum Rating
     150 ekW
    Emissions/Fuel Strategy
     Non Regulated
  • TH3510D Ag Handler - Telehandlers
    Maximum Lift Height
     32.2 ft
    Operating Weight - With Carriage and Forks*
     20170 lb
    Rated Load Capacity
     7716 lb
  • 4.1 m3 (5.4 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     5.4 yd³
    Width
     119.4 in
    Weight
     4753.2 lb
  • CW-10 - Couplers - Excavator
    Weight
     143 lb
    Width
     12.4 in
    Load Rating, Hoisting Hook
     4.4 ton (US)
  • 313F L - Excavators
    Gross Power - SAE J1995
     74 kW (100 hp/101 PS)
    Operating Weight
     33080 lb
  • 1220 mm (48 in) - Fork Accessories

     -

    -
  • 826K - Compactors
    Gross Power
     435 HP
    Operating Weight
     90207 lb
  • C32 Tier 3 / IMO II - Marine Power Systems
    Power Range
     61-1450 bhp (46-1072 bkW)
    Rated Engine Speed
     1600-2300 rpm
    Emissions
     U.S. EPA Tier 3 / IMO II emissions certified
  • 6.9m³ (9yd³) Performance Series - Buckets - Loader
    Capacity
     9 yd³
    Width
     158 in
    Weight
     11098 lb
  • 20m³ (26.2yd³) Heavy Rock - Buckets - Mining Shovels

     -

    -
  • 1730 mm (68 in), Bolt-On Cutting Edge - Buckets - Skid Steer Loader
    Capacity
     0.52 yd³
    Width
     68.1 in
    Weight
     551.2 lb
  • C18 IMO II - Marine Power Systems
    Maximum Rating
     660 BHP
    Minimum Rating
     404 BHP
    Aspiration
     TA, TTA
  • 2802mm (110in) - Forks
    Fork Width
     110 in
    Inside Height
     61 in
    Weight
     7020 lb
  • 12m³ (15.7yd³) Standard Rock - Buckets - Mining Shovels

     -

    -
  • HOW REMANUFACTURING WORKS

     -

    -
  • 950M - Wheel Loaders
    Maximum Net Power - 2,100 rpm - ISO 9249
     230 HP
    Operating Weight
     42357 lb
    Bucket Capacities
     2.5-9.2 m³ (3.3-12.0 yd³)
  • TIPS

     -

    -
  • 0.6 m3 (0.8 yd3), Bolt-On Cutting Edge - Buckets - Compact Wheel Loader
    Capacity
     0.8 yd³
    Width
     70.5 in
    Weight
     686.1 lb
  • 834K - Dozers
    Net Power
     496 HP
    Operating Weight
     105271 lb
  • C12 ACERT - Marine Power Systems
    Power Range
     660-705 bhp (492-526 bkW)
    Speed Range
     2300 rpm
    Emissions
     IMO II
  • 4.7m³ (6.2yd³) Iron Ore - Buckets - Loader
    Capacity
     6.2 yd³
    Width
     154 in
    Weight
     12723 lb
  • 11m³ (14.4yd³) Heavy Rock - Buckets - Mining Shovels

     -

    -
  • C18 ACERT Tier 3 - Marine Power Systems
    Power Range
     469-1001 bhp (350-747 bkW)
    Speed Range
     1800-2300 rpm
    Emissions
     EPA Tier 3 Commercial, IMO II, EU IW
  • ATC Molded Case Circuit Breaker & Molded Case Switch ATS - Electric Power
    Rating Range
     30-1000A
    Transfer Type
     Open transition
    Switch Type
     Molded Case
  • CG170-16 - Electric Power
    Fuel Type
     Natural Gas, Biogas, Coal Gas
    Frequency
     50 or 60 Hz
  • MX150 Microprocessor Controller - Electric Power
    Rating Range
     Switch Dependent
    Transfer Type
     Application Dependent
    Switch Type
     Application Dependent
  • DG80-2 (Single Phase) - Electric Power
    Fuel System
     Natural Gas
    Frequency
     60 Hz
    Emissions/Fuel Strategy
     U.S. EPA Certified for Stationary Emergency Application
  • 5.0 m3 (6.5 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     6.5 yd³
    Width
     108.1 in
    Weight
     3300.3 lb
  • 3516C (50 Hz) with Upgradeable Package - Electric Power
    Minimum Rating
     2500 kVA
    Maximum Rating
     2750 kVA
    Emissions/Fuel Strategy
     Low Fuel Consumption
  • M 32 E - Marine Power Systems
    Power Range
     3300 - 4950 kW
    Speed Range
     720-750 rpm
    Emissions
     IMO II / IMO III with SCR
  • 5.9m³ (7.75yd³) - Buckets - Loader
    Capacity
     7.75 yd³
    Width
     130 in
    Weight
     4251 lb
  • CVP16 - Compactors
    Impulse Force
     3641.91 lb

    -
    Base Plate Width
     12 in
  • 966-972 Fusion™ - Couplers - Loader
    Weight
     1244 lb

    -
  • 1.5 m3 (2.0 yd3), IT Coupler, Bolt-On Teeth - Buckets - Compact Wheel Loader
    Rated Capacity
     2.2 yd³
    Width
     95.6 in
    Weight
     1250 lb
  • 7.4m (9.7)yd Extreme Duty - Buckets - Mining Shovels

     -

    -
  • PM310 Track Undercarriage - Cold Planers
    Rated Power
     336.6 HP
    Operating Weight
     48016 lb
    Milling Width
     39.4 in
  • 279D - Compact Track and Multi Terrain Loaders
    Gross Power
     74.3 HP
    Operating Weight
     9893 lb
  • 4.1 m3 (5.4 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     5.4 yd³
    Width
     119.4 in
    Weight
     4759.8 lb
  • 834K Scoops for Coal & Woodchips - Dozers
    Net Power
     496 HP
    Operating Weight
     112838 lb
  • 3.0 m3 (3.9 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     4 yd³
    Width
     108.1 in
    Weight
     2731.5 lb
  • 3.5 m3 (4.6 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     4.6 yd³
    Width
     106.9 in
    Weight
     4027.8 lb
  • C13 - Industrial
    Maximum Power
     520 HP
    Rated Speed
     1800-2100 rpm
    Weight - Approximate, Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C
     2085-2304 kg (4596-5080 lb)
  • 3.8 m3 (5.0 yd3), Pin On, Bolt-On Cutting Edge - Buckets - Loader
    Capacity
     5 yd³
    Width
     108.1 in
    Weight
     3024.7 lb
Conversor KVA/KW
Back
​1 – Enter your electric needs in amperes (Amps)
A two bedroom house can use about 30 amps and a three bedroom house, about 45 amperes. A small business can use about 50-100 amps.

2 - Enter the input voltage in your home or business (Volts)
Most residential applications have about 220 Volts (V). Most companies have about 400 V.

3 - Choose from a single to a three-phase current (Monofásica ou Trifásica)
The houses are generally a single phase. Companies are generally three phases.
Saiba como calcular
Monofásico Trifásico
DO YOU ALREADY KNOW THE ENERGY YOU NEED?
CHECK OUT OUR COMPLETE RANGE OF GENSETS.

How can we help you?


  (+351) 219 409 300

Business Hours
Monday and Tuesday: 09:00 -13:00 | 14:00 -17:30
Wednesday and Friday: 08:30 -13:00  | 14:00 -17:30

Equipments
Power Systems
Parts
Used Equipment
Rental
Service
Technology Solutions
VisionLink
Company
Works with us
Special Offers
News

Follow us

Termos e condições de venda   |   Privacy Policy   |   Cookie Policy   |   Customer Portal Terms and Conditions   |   Livro de reclamações

© Copyright 2020. All rights reserved.